> Hi,
>
> I have this error for a while, the second tuner is not recognized
> correctly. I've
> tested it today again with 0.10.5 and with the 2.6.22-5 kernel and latest
> firmware.
> I've also tried to swap the card into another slot, same problem. It did
> work half a
> year ago with 0.8 orso (ubuntu 6.10). In windows, everything works fine!
Have you tested it recently under windows? It looks like broken hardware
to me: the driver can't find the cx2584x chip on the second unit.
You can also try to load the module with module option 'newi2c=1'. There
is a small chance that that will make the difference.
Regards,
Hans
> I'm able to do some debugging, but I need some starting pointers for this
> one.
> Searching the mailinglists only gave me some clues about wm8775 driver
> etc, but that is
> already loaded. The first tuner works fine!
>
> Stephan
>
> [ 59.066585] ivtv: ==================== START INIT IVTV
> ====================
> [ 59.066593] ivtv: version 1.0.0 (2.6.22.5-v1 SMP mod_unload 586 )
> loading
> [ 59.066696] ivtv0: Autodetected Hauppauge card (cx23416 based)
> [ 59.067628] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 23 (level, low)
> -> IRQ 16
> [ 59.231231] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low)
> -> IRQ 22
> [ 59.231263] PCI: Setting latency timer of device 0000:00:1f.5 to 64
> [ 59.650047] intel8x0_measure_ac97_clock: measured 52074 usecs
> [ 59.650051] intel8x0: clocking to 48000
> [ 59.650081] PM: Adding info for No Bus:pcmC0D4p
> [ 59.650132] PM: Adding info for No Bus:pcmC0D3c
> [ 59.650165] PM: Adding info for No Bus:pcmC0D2c
> [ 59.650201] PM: Adding info for No Bus:pcmC0D1c
> [ 59.650235] PM: Adding info for No Bus:adsp
> [ 59.650265] PM: Adding info for No Bus:pcmC0D0p
> [ 59.650298] PM: Adding info for No Bus:pcmC0D0c
> [ 59.650327] PM: Adding info for No Bus:dsp
> [ 59.650354] PM: Adding info for No Bus:audio
> [ 59.650389] PM: Adding info for ac97:0-0:AD1985
> [ 59.650427] PM: Adding info for No Bus:controlC0
> [ 59.650463] PM: Adding info for No Bus:mixer
> [ 59.681986] PM: Adding info for No Bus:0000:03:08.0
> [ 59.745413] PM: Removing info for No Bus:0000:03:08.0
> [ 59.750542] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> [ 59.965477] ivtv0: Encoder revision: 0x02060039
> [ 59.965514] PM: Adding info for No Bus:i2c-0
> [ 59.966035] PM: Adding info for i2c:0-0050
> [ 60.025956] tveeprom 0-0050: Hauppauge model 23559, rev D596, serial#
> 9822499
> [ 60.025961] tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx
> 96, type 73)
> [ 60.025964] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
> PAL(D/D1/K) (eeprom 0x74)
> [ 60.025968] tveeprom 0-0050: second tuner model is Philips TEA5768HL FM
> Radio (idx 101, type 62)
> [ 60.025971] tveeprom 0-0050: audio processor is CX25843 (idx 37)
> [ 60.025973] tveeprom 0-0050: decoder processor is CX25843 (idx 30)
> [ 60.025975] tveeprom 0-0050: has radio, has no IR receiver, has no IR
> transmitter
> [ 60.025979] ivtv0: Autodetected WinTV PVR 500 (unit #1)
> [ 60.056799] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
> [ 60.056820] PM: Adding info for i2c:0-0043
> [ 60.056837] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
> [ 60.060716] tuner 0-0060: TEA5767 detected.
> [ 60.060718] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> [ 60.060725] PM: Adding info for i2c:0-0060
> [ 60.060737] tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
> [ 60.060981] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> [ 60.060987] PM: Adding info for i2c:0-0061
> [ 60.096321] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver
> #0)
> [ 60.096354] PM: Adding info for i2c:0-0044
> [ 60.113255] PM: Adding info for No Bus:0-0044
> [ 60.126738] PM: Removing info for No Bus:0-0044
> [ 63.563872] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382
> bytes)
> [ 63.671900] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
> [ 63.680079] PM: Adding info for i2c:0-001b
> [ 63.719537] tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A)
> [ 64.037787] ivtv0: Registered device video0 for encoder MPEG (4 MB)
> [ 64.038025] ivtv0: Registered device video32 for encoder YUV (2 MB)
> [ 64.038320] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
> [ 64.038429] ivtv0: Registered device video24 for encoder PCM audio (1
> MB)
> [ 64.038788] ivtv0: Registered device radio0 for encoder radio
> [ 64.067661] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
> [ 64.067718] ivtv: ====================== NEXT CARD
> ======================
> [ 64.067723] ivtv1: Autodetected Hauppauge card (cx23416 based)
> [ 64.067805] ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low)
> -> IRQ 23
> [ 64.682167] PM: Adding info for No Bus:0000:03:09.0
> [ 64.699508] PM: Removing info for No Bus:0000:03:09.0
> [ 64.706402] ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> [ 64.921433] ivtv1: Encoder revision: 0x02060039
> [ 64.921460] PM: Adding info for No Bus:i2c-1
> [ 64.922139] PM: Adding info for i2c:1-0050
> [ 64.926337] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1)
> [ 64.926344] PM: Adding info for i2c:1-0043
> [ 64.926361] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
> [ 64.929553] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1)
> [ 64.929561] PM: Adding info for i2c:1-0061
> [ 64.944536] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1)
> [ 64.952726] PM: Adding info for i2c:1-001b
> [ 65.012771] tveeprom 1-0050: Hauppauge model 23559, rev D596, serial#
> 9822499
> [ 65.012776] tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx
> 96, type 73)
> [ 65.012779] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L')
> PAL(D/D1/K) (eeprom 0x74)
> [ 65.012783] tveeprom 1-0050: second tuner model is Philips TEA5768HL FM
> Radio (idx 101, type 62)
> [ 65.012786] tveeprom 1-0050: audio processor is CX25843 (idx 37)
> [ 65.012788] tveeprom 1-0050: decoder processor is CX25843 (idx 30)
> [ 65.012791] tveeprom 1-0050: has radio, has no IR receiver, has no IR
> transmitter
> [ 65.012794] ivtv1: Correcting tveeprom data: no radio present on second
> unit
> [ 65.012796] ivtv1: Autodetected WinTV PVR 500 (unit #2)
> [ 65.034620] tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A)
> [ 65.034628] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c!
> [ 65.034633] ivtv1: i2c addr 0x44 not found for command 0x4008646f!
> [ 65.037161] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for
> command 0x4008646d!
> [ 65.144870] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c!
> [ 65.144875] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c!
> [ 65.256601] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for
> command 0xc008561c!
> [ 65.256829] ivtv1: Registered device video1 for encoder MPEG (4 MB)
> [ 65.257183] ivtv1: Registered device video33 for encoder YUV (2 MB)
> [ 65.257434] ivtv1: Registered device vbi1 for encoder VBI (1 MB)
> [ 65.257548] ivtv1: Registered device video25 for encoder PCM audio (1
> MB)
> [ 65.260991] ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
> [ 65.261023] ivtv: ==================== END INIT IVTV
> ====================
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
