Hi, I have this error for a while, the second tuner is not recognized correctly. I've tested it today again with 0.10.5 and with the 2.6.22-5 kernel and latest firmware. I've also tried to swap the card into another slot, same problem. It did work half a year ago with 0.8 orso (ubuntu 6.10). In windows, everything works fine!
I'm able to do some debugging, but I need some starting pointers for this one. Searching the mailinglists only gave me some clues about wm8775 driver etc, but that is already loaded. The first tuner works fine! Stephan [ 59.066585] ivtv: ==================== START INIT IVTV ==================== [ 59.066593] ivtv: version 1.0.0 (2.6.22.5-v1 SMP mod_unload 586 ) loading [ 59.066696] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 59.067628] ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 23 (level, low) -> IRQ 16 [ 59.231231] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 22 [ 59.231263] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 59.650047] intel8x0_measure_ac97_clock: measured 52074 usecs [ 59.650051] intel8x0: clocking to 48000 [ 59.650081] PM: Adding info for No Bus:pcmC0D4p [ 59.650132] PM: Adding info for No Bus:pcmC0D3c [ 59.650165] PM: Adding info for No Bus:pcmC0D2c [ 59.650201] PM: Adding info for No Bus:pcmC0D1c [ 59.650235] PM: Adding info for No Bus:adsp [ 59.650265] PM: Adding info for No Bus:pcmC0D0p [ 59.650298] PM: Adding info for No Bus:pcmC0D0c [ 59.650327] PM: Adding info for No Bus:dsp [ 59.650354] PM: Adding info for No Bus:audio [ 59.650389] PM: Adding info for ac97:0-0:AD1985 [ 59.650427] PM: Adding info for No Bus:controlC0 [ 59.650463] PM: Adding info for No Bus:mixer [ 59.681986] PM: Adding info for No Bus:0000:03:08.0 [ 59.745413] PM: Removing info for No Bus:0000:03:08.0 [ 59.750542] ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 59.965477] ivtv0: Encoder revision: 0x02060039 [ 59.965514] PM: Adding info for No Bus:i2c-0 [ 59.966035] PM: Adding info for i2c:0-0050 [ 60.025956] tveeprom 0-0050: Hauppauge model 23559, rev D596, serial# 9822499 [ 60.025961] tveeprom 0-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) [ 60.025964] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 60.025968] tveeprom 0-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) [ 60.025971] tveeprom 0-0050: audio processor is CX25843 (idx 37) [ 60.025973] tveeprom 0-0050: decoder processor is CX25843 (idx 30) [ 60.025975] tveeprom 0-0050: has radio, has no IR receiver, has no IR transmitter [ 60.025979] ivtv0: Autodetected WinTV PVR 500 (unit #1) [ 60.056799] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 60.056820] PM: Adding info for i2c:0-0043 [ 60.056837] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 60.060716] tuner 0-0060: TEA5767 detected. [ 60.060718] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0) [ 60.060725] PM: Adding info for i2c:0-0060 [ 60.060737] tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio) [ 60.060981] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 60.060987] PM: Adding info for i2c:0-0061 [ 60.096321] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 60.096354] PM: Adding info for i2c:0-0044 [ 60.113255] PM: Adding info for No Bus:0-0044 [ 60.126738] PM: Removing info for No Bus:0-0044 [ 63.563872] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 63.671900] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 63.680079] PM: Adding info for i2c:0-001b [ 63.719537] tuner 0-0061: type set to 73 (Samsung TCPG 6121P30A) [ 64.037787] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 64.038025] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 64.038320] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 64.038429] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 64.038788] ivtv0: Registered device radio0 for encoder radio [ 64.067661] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 [ 64.067718] ivtv: ====================== NEXT CARD ====================== [ 64.067723] ivtv1: Autodetected Hauppauge card (cx23416 based) [ 64.067805] ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 20 (level, low) -> IRQ 23 [ 64.682167] PM: Adding info for No Bus:0000:03:09.0 [ 64.699508] PM: Removing info for No Bus:0000:03:09.0 [ 64.706402] ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 64.921433] ivtv1: Encoder revision: 0x02060039 [ 64.921460] PM: Adding info for No Bus:i2c-1 [ 64.922139] PM: Adding info for i2c:1-0050 [ 64.926337] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #1) [ 64.926344] PM: Adding info for i2c:1-0043 [ 64.926361] tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 64.929553] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #1) [ 64.929561] PM: Adding info for i2c:1-0061 [ 64.944536] wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #1) [ 64.952726] PM: Adding info for i2c:1-001b [ 65.012771] tveeprom 1-0050: Hauppauge model 23559, rev D596, serial# 9822499 [ 65.012776] tveeprom 1-0050: tuner model is Samsung TCPG 6121P30A (idx 96, type 73) [ 65.012779] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 65.012783] tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) [ 65.012786] tveeprom 1-0050: audio processor is CX25843 (idx 37) [ 65.012788] tveeprom 1-0050: decoder processor is CX25843 (idx 30) [ 65.012791] tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter [ 65.012794] ivtv1: Correcting tveeprom data: no radio present on second unit [ 65.012796] ivtv1: Autodetected WinTV PVR 500 (unit #2) [ 65.034620] tuner 1-0061: type set to 73 (Samsung TCPG 6121P30A) [ 65.034628] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 65.034633] ivtv1: i2c addr 0x44 not found for command 0x4008646f! [ 65.037161] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d! [ 65.144870] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 65.144875] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 65.256601] ivtv1: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! [ 65.256829] ivtv1: Registered device video1 for encoder MPEG (4 MB) [ 65.257183] ivtv1: Registered device video33 for encoder YUV (2 MB) [ 65.257434] ivtv1: Registered device vbi1 for encoder VBI (1 MB) [ 65.257548] ivtv1: Registered device video25 for encoder PCM audio (1 MB) [ 65.260991] ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 [ 65.261023] ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
