On 9/18/07, Sander Sweers <[EMAIL PROTECTED]> wrote: > On 9/18/07, Mike Fenston <[EMAIL PROTECTED]> wrote: > > Unfortunately your answer is not true ... the ATrpms do not contain > > all the necessary ivtv modules for PVR-350 tv out. ivtv-fb.ko is > > missing ... > > Yes it does. Which architecture are you on? For example on i386 > ivtv-fb.ko is in the ivtv-kmdl-2.6.22.1-32.fc6-1.0.2-134.fc6.i686.rpm. > > > v4l-cx2341x-init.mpg is missing ... I have pulled the > > latest updates for FC6. > > This is in ivtv-firmware-20070217-13.noarch.rpm which I would expect > would be pulled in by ivtv-kmdl. > > > when I built ivtv-fb.ko manually I am now running into this problem: > > > > (EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device /dev/fb0 > > Are you sure it is /dev/fb0 and not /dev/fb1 (cat /proc/fb). Is the > module loaded at all? > > > I have the ivtv_xdriver from ATrpms ... is that good enough now or do > > I need to manually compile something here too? From reading other > > posts even if I get X up and running I will have to remove the ATrpms > > mythtv and compile it on my own from the revision control repositories > > (is this still true?) Does anyone have a stable PVR-350 TV-out now on > > the 2.6.22.5-49 kernel? It was rock solid with FC5 ... even when it > > flaked out the picture it would self recover. > > The Xdriver has received much love from the developers lately and if > you want to use the version currently in svn trunk you will need to > rebuild mythtv with a patch. This only applies if you want to use the > build in support for the tv-out in mythtv not when you only use the > Xdriver. > > The one that is in the ATrpms repo should work fine with ivtv-fb. > > Can you please stop top posting, thanks. > > Greets > Sander > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users >
sorry about the top posting ... bad habits! ... here is the info for your questions (below) ... pretty sure I have the latest stuff for FC6. I did a box upgrade from FC5 to FC6 and did everything again for ivtv on Jarod's howto site. I did an updatedb and then locate ivtv-fb.ko before building that myself ... maybe a yum malfunction ... dunno ... In any case I think you answered my question. PVR-350 TV-out support is not available yet in mythtv using ATrpms packages (as it was in FC5). I just bought a scan converter on Ebay that I can hook up to the VGA port on the mythbox PC ... hopefully it will work well enough to keep the wife happy short term ... will try the PVR-350 mythtv/TV-out route in the future (once full ATrpms package support is there) depending on how the scan converter works out ... [EMAIL PROTECTED] firmware]# yum info ivtv Loading "installonlyn" plugin Setting up repositories Reading repository metadata in from local files Available Packages Name : ivtv Arch : i386 Epoch : 1 Version: 1.0.2 Release: 134.fc6 Size : 141 k Repo : atrpms Summary: An iTVC15/16 and CX23415/16 driver Description: The primary goal of the IvyTV Project is to create a kernel driver for the iTVC15 familiy of MPEG codecs. The iTVC15 family includes the iTVC15 (CX24315) and iTVC16 (CX24316). These chips are commonly found on Hauppauge's WinTV PVR-250 and PVR-350 TV capture cards. [EMAIL PROTECTED] firmware]# cat /proc/fb 0 cx23415 TV out -Mike _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
