Ok, sorry to bump this thread, but I just cannot get this card working. I've been trying everything I could think of. I tested and replaced ram, motherboard, cpu, graphic card, I've tried the card with several distributions and kernel-versions (including ubuntu feisty, gutsy testing, arch current/testing, debian etch/testing,...). Anyway, the problem persists.
I have image and sound for every cable channel available, however I experience heavy flickering. It doesn't make a difference if I watch tv using mythtv or via mplayer or if I just redirect the output of /dev/video0 to an mpg video file and watch it with mplayer/vlc. I don't know what else I should try. I am 100% sure that it is an ivtv problem, because the card works just fine (no flickering at all) in Windows Xp. I attach the output of dmesg |grep ivtv on ubuntu gutsy beta. The card is initialized fine, perhaps the only interesting thing is the difference between encoder revision and recommended firmware version. However, using other distributions, I didn't observe this message. [ 15.328000] ivtv: ==================== START INIT IVTV ==================== [ 15.328000] ivtv: version 1.0.0 (2.6.22-13-generic SMP mod_unload 586 ) loading [ 15.328000] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 15.332000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 15.996000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (4153182592 bytes) [ 16.212000] ivtv0: Encoder revision: 0x02050032 [ 16.212000] ivtv0: Recommended firmware version is 0x02060039. [ 16.264000] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 16.264000] ivtv0: reopen i2c bus for IR-blaster support [ 16.332000] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 16.488000] cx25840 2-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) [ 19.920000] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 20.272000] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 20.272000] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 20.272000] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 20.272000] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 20.296000] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 [ 20.296000] ivtv: ==================== END INIT IVTV ==================== Any help is greatly appreciated. If anyone needs further output, I'll happily provide it. Thx! Bernhard -- This message was sent on behalf of [EMAIL PROTECTED] at openSubscriber.com http://www.opensubscriber.com/message/[email protected]/7457608.html _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
