So I am assuming I can get my audio with an rca connection? Richard
On 10/27/07, [EMAIL PROTECTED] < [EMAIL PROTECTED]> wrote: > > Send ivtv-users mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://ivtvdriver.org/mailman/listinfo/ivtv-users > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ivtv-users digest..." > > > Today's Topics: > > 1. PVR-150 and PVR-500 won't work together (Brian J. Stults) > 2. Re: PVR-150 and PVR-500 won't work together (Fred Firestine) > 3. Re: PVR500, 0.10.6, DMA errors (Dan Ritter) > 4. no audio (Richard Konrad) > 5. Re: no audio (steve) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 26 Oct 2007 10:00:19 -0400 > From: "Brian J. Stults" <[EMAIL PROTECTED]> > Subject: [ivtv-users] PVR-150 and PVR-500 won't work together > To: User discussion about IVTV <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > I have had a PVR-150 for a couple years and I just added a PVR-500 to > the same system. The PVR-150 will not initialize when the PVR-500 is > also installed. If I take the 500 out, the 150 works fine again. The > 300 works regardless of whether the 150 is installed or not. I am using > the latest firmware from ivtvdriver.org as of today. I've tried putting > the two cards in all different combinations of PCI slots. The relevant > output is below. Any suggestions? Thanks. > > kernel: 2.6.23 (but same with .21 and .22) > driver: 1.0.3 (but same with 1.0.2) > > ivtv: Start initialization, version 1.0.0 > ivtv0: Initializing card #0 > ivtv0: Autodetected Hauppauge card (cx23416 based) > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: Encoder revision: 0x02060039 > tveeprom 2-0050: Huh, no eeprom present (err=-121)? > tveeprom 2-0050: Encountered bad packet header [a8]. Corrupt or not a > Hauppauge eeprom. > ivtv0: Invalid EEPROM > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c > ivtv0: i2c addr 0x44 not found for command 0x4008646f > ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 > ivtv1: Initializing card #1 > ivtv1: Autodetected Hauppauge card (cx23416 based) > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv1: Encoder revision: 0x02060039 > tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) > tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 3-0060: TEA5767 detected. > tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1) > tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) > cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) > cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) > tveeprom 3-0050: Hauppauge model 23552, rev E692, serial# 10235710 > tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) > tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx > 101, type 62) > tveeprom 3-0050: audio processor is CX25843 (idx 37) > tveeprom 3-0050: decoder processor is CX25843 (idx 30) > tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter > ivtv1: Autodetected WinTV PVR 500 (unit #1) > tuner 3-0061: type set to 57 (Philips FQ1236A MK4) > ivtv1: Registered device video1 for encoder MPEG (4 MB) > ivtv1: Registered device video33 for encoder YUV (2 MB) > ivtv1: Registered device vbi1 for encoder VBI (1 MB) > ivtv1: Registered device video25 for encoder PCM audio (1 MB) > ivtv1: Registered device radio1 for encoder radio > ivtv1: Initialized card #1: WinTV PVR 500 (unit #1) > ivtv2: Initializing card #2 > ivtv2: Autodetected Hauppauge card (cx23416 based) > ivtv2: Unreasonably low latency timer, setting to 64 (was 32) > ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv2: Encoder revision: 0x02060039 > tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) > tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) > cx25840 4-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #2) > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) > tveeprom 4-0050: Hauppauge model 23552, rev E692, serial# 10235710 > tveeprom 4-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) > tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx > 101, type 62) > tveeprom 4-0050: audio processor is CX25843 (idx 37) > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter > ivtv2: Correcting tveeprom data: no radio present on second unit > ivtv2: Autodetected WinTV PVR 500 (unit #2) > tuner 4-0061: type set to 57 (Philips FQ1236A MK4) > ivtv2: Registered device video2 for encoder MPEG (4 MB) > ivtv2: Registered device video34 for encoder YUV (2 MB) > ivtv2: Registered device vbi2 for encoder VBI (1 MB) > ivtv2: Registered device video26 for encoder PCM audio (1 MB) > ivtv2: Initialized card #2: WinTV PVR 500 (unit #2) > ivtv: End initialization > > > Module Size Used by > lirc_serial 14452 1 > lirc_dev 14308 1 lirc_serial > nvidia 6215440 40 > agpgart 33328 1 nvidia > nfsd 95912 13 > exportfs 5376 1 nfsd > nfs 126828 1 > lockd 65672 3 nfsd,nfs > sunrpc 166684 9 nfsd,nfs,lockd > psmouse 38928 0 > ide_generic 1408 0 [permanent] > wm8775 6156 0 > cx25840 25872 0 > tuner 63400 0 > usblp 13312 0 > snd_intel8x0 31004 1 > snd_ac97_codec 94508 1 snd_intel8x0 > ac97_bus 2304 1 snd_ac97_codec > snd_pcm_oss 42784 1 > snd_mixer_oss 16512 1 snd_pcm_oss > snd_pcm 73864 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss > snd_timer 21892 1 snd_pcm > snd 50788 6 > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > ivtv 133648 2 > evdev 10496 0 > firmware_class 9600 2 cx25840,ivtv > cx2341x 12548 1 ivtv > ide_cd 39072 0 > tveeprom 15888 1 ivtv > videodev 28288 3 ivtv > v4l2_common 17536 6 wm8775,cx25840,tuner,ivtv,cx2341x,videodev > v4l1_compat 14852 2 ivtv,videodev > ohci_hcd 18948 0 > usbcore 125848 3 usblp,ohci_hcd > cdrom 36256 1 ide_cd > i2c_nforce2 6528 0 > soundcore 7648 2 snd > snd_page_alloc 10504 2 snd_intel8x0,snd_pcm > > > > ------------------------------ > > Message: 2 > Date: Fri, 26 Oct 2007 21:46:52 -0400 > From: "Fred Firestine" <[EMAIL PROTECTED]> > Subject: Re: [ivtv-users] PVR-150 and PVR-500 won't work together > To: "User discussion about IVTV" <[email protected]> > Message-ID: > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1 > > On 10/26/07, Brian J. Stults <[EMAIL PROTECTED]> wrote: > > I have had a PVR-150 for a couple years and I just added a PVR-500 to > > the same system. The PVR-150 will not initialize when the PVR-500 is > > also installed. If I take the 500 out, the 150 works fine again. The > > 300 works regardless of whether the 150 is installed or not. I am using > > the latest firmware from ivtvdriver.org as of today. I've tried putting > > the two cards in all different combinations of PCI slots. The relevant > > output is below. Any suggestions? Thanks. > > > > kernel: 2.6.23 (but same with .21 and .22) > > driver: 1.0.3 (but same with 1.0.2) > > > > ivtv: Start initialization, version 1.0.0 > > ivtv0: Initializing card #0 > > ivtv0: Autodetected Hauppauge card (cx23416 based) > > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > ivtv0: Encoder revision: 0x02060039 > > tveeprom 2-0050: Huh, no eeprom present (err=-121)? > > tveeprom 2-0050: Encountered bad packet header [a8]. Corrupt or not a > > Hauppauge eeprom. > > ivtv0: Invalid EEPROM > > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command > 0xc008561c > > ivtv0: i2c addr 0x44 not found for command 0x4008646f > > ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d > > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command > 0x4008646d > > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command > 0xc008561c > > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command > 0xc008561c > > ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command > 0xc008561c > > ivtv0: Registered device video0 for encoder MPEG (4 MB) > > ivtv0: Registered device video32 for encoder YUV (2 MB) > > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > > ivtv0: Registered device radio0 for encoder radio > > ivtv0: Initialized card #0: Hauppauge WinTV PVR-150 > > ivtv1: Initializing card #1 > > ivtv1: Autodetected Hauppauge card (cx23416 based) > > ivtv1: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > ivtv1: Encoder revision: 0x02060039 > > tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) > > tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) > > tuner 3-0060: TEA5767 detected. > > tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1) > > tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio) > > tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) > > cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1) > > cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) > > tveeprom 3-0050: Hauppauge model 23552, rev E692, serial# 10235710 > > tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) > > tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) > > tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx > > 101, type 62) > > tveeprom 3-0050: audio processor is CX25843 (idx 37) > > tveeprom 3-0050: decoder processor is CX25843 (idx 30) > > tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter > > ivtv1: Autodetected WinTV PVR 500 (unit #1) > > tuner 3-0061: type set to 57 (Philips FQ1236A MK4) > > ivtv1: Registered device video1 for encoder MPEG (4 MB) > > ivtv1: Registered device video33 for encoder YUV (2 MB) > > ivtv1: Registered device vbi1 for encoder VBI (1 MB) > > ivtv1: Registered device video25 for encoder PCM audio (1 MB) > > ivtv1: Registered device radio1 for encoder radio > > ivtv1: Initialized card #1: WinTV PVR 500 (unit #1) > > ivtv2: Initializing card #2 > > ivtv2: Autodetected Hauppauge card (cx23416 based) > > ivtv2: Unreasonably low latency timer, setting to 64 (was 32) > > ivtv2: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > > ivtv2: Encoder revision: 0x02060039 > > tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) > > tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner) > > tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) > > cx25840 4-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #2) > > cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes) > > wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) > > tveeprom 4-0050: Hauppauge model 23552, rev E692, serial# 10235710 > > tveeprom 4-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) > > tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08) > > tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx > > 101, type 62) > > tveeprom 4-0050: audio processor is CX25843 (idx 37) > > tveeprom 4-0050: decoder processor is CX25843 (idx 30) > > tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter > > ivtv2: Correcting tveeprom data: no radio present on second unit > > ivtv2: Autodetected WinTV PVR 500 (unit #2) > > tuner 4-0061: type set to 57 (Philips FQ1236A MK4) > > ivtv2: Registered device video2 for encoder MPEG (4 MB) > > ivtv2: Registered device video34 for encoder YUV (2 MB) > > ivtv2: Registered device vbi2 for encoder VBI (1 MB) > > ivtv2: Registered device video26 for encoder PCM audio (1 MB) > > ivtv2: Initialized card #2: WinTV PVR 500 (unit #2) > > ivtv: End initialization > > > > > > Module Size Used by > > lirc_serial 14452 1 > > lirc_dev 14308 1 lirc_serial > > nvidia 6215440 40 > > agpgart 33328 1 nvidia > > nfsd 95912 13 > > exportfs 5376 1 nfsd > > nfs 126828 1 > > lockd 65672 3 nfsd,nfs > > sunrpc 166684 9 nfsd,nfs,lockd > > psmouse 38928 0 > > ide_generic 1408 0 [permanent] > > wm8775 6156 0 > > cx25840 25872 0 > > tuner 63400 0 > > usblp 13312 0 > > snd_intel8x0 31004 1 > > snd_ac97_codec 94508 1 snd_intel8x0 > > ac97_bus 2304 1 snd_ac97_codec > > snd_pcm_oss 42784 1 > > snd_mixer_oss 16512 1 snd_pcm_oss > > snd_pcm 73864 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss > > snd_timer 21892 1 snd_pcm > > snd 50788 6 > > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > > ivtv 133648 2 > > evdev 10496 0 > > firmware_class 9600 2 cx25840,ivtv > > cx2341x 12548 1 ivtv > > ide_cd 39072 0 > > tveeprom 15888 1 ivtv > > videodev 28288 3 ivtv > > v4l2_common 17536 6 > wm8775,cx25840,tuner,ivtv,cx2341x,videodev > > v4l1_compat 14852 2 ivtv,videodev > > ohci_hcd 18948 0 > > usbcore 125848 3 usblp,ohci_hcd > > cdrom 36256 1 ide_cd > > i2c_nforce2 6528 0 > > soundcore 7648 2 snd > > snd_page_alloc 10504 2 snd_intel8x0,snd_pcm > > > > _______________________________________________ > > ivtv-users mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > > > Have you tried shutdown and power off, then restart? I have a PVR-350 > and PVR-150 and at one time I saw different behavior on a simple > reboot vs. a shutdown/restart. > > > > ------------------------------ > > Message: 3 > Date: Fri, 26 Oct 2007 21:57:21 -0400 > From: Dan Ritter <[EMAIL PROTECTED]> > Subject: Re: [ivtv-users] PVR500, 0.10.6, DMA errors > To: User discussion about IVTV <[email protected]> > Cc: [EMAIL PROTECTED] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > On Thu, Oct 25, 2007 at 08:20:10AM +0200, Hans Verkuil wrote: > > On Wednesday 24 October 2007 19:01:18 Dan Ritter wrote: > > > I was having ivtvX: DMA TIMEOUT 00000001 errors, so I updated to > > > 0.10.6 > > > I have two suggestions: first edit ivtv-irq.c: search for the > > ivtv_dma_enc_start function, at the end of this function you see this > > line: > > > > itv->dma_timer.expires = jiffies + HZ / 10; > > > > Remove ' / 10'. Compile, install, etc. and see if the TIMEOUT returns. > > I've run with this patch for about 24 hours now, including > several recordings, and no errors have exhibited yet. > > I will check back in a few days or if the errors return. > > Thanks! > > -dsr- > > > -- > Every time you give up a right, the terrorists win. > Tyranny is something that creeps up on you. > > http://tao.merseine.nu:81/~dsr/eula.html is hereby incorporated by > reference. > > > > ------------------------------ > > Message: 4 > Date: Sat, 27 Oct 2007 00:07:20 -0500 > From: "Richard Konrad" <[EMAIL PROTECTED]> > Subject: [ivtv-users] no audio > To: [email protected] > Message-ID: > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Hello, > > I'm new to this list. I've had some issues setting up my Hauppauge prv > 150 > card (windows media edition). But everything is basically ok now. I have > been sharing the cable with my tv until recently I bought an s-video > cable > - attached it - and did "v4l2-ctl --set-input=2". The picture was fine > but > I have lost my audio. Recordings also have no audio. > > I could give you more information if you would like but I thought I might > be > doing something basically wrong. You input is appreciated. > > Richard > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://ivtvdriver.org/pipermail/ivtv-users/attachments/20071027/3cf389c2/attachment-0001.html > > ------------------------------ > > Message: 5 > Date: Sat, 27 Oct 2007 01:20:29 -0400 > From: steve <[EMAIL PROTECTED]> > Subject: Re: [ivtv-users] no audio > To: User discussion about IVTV <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Richard Konrad wrote: > > Hello, > > > > I'm new to this list. I've had some issues setting up my Hauppauge > > prv 150 card (windows media edition). But everything is basically ok > > now. I have been sharing the cable with my tv until recently I > > bought an s-video cable - attached it - and did "v4l2-ctl > > --set-input=2". The picture was fine but I have lost my audio. > > Recordings also have no audio. > > > > I could give you more information if you would like but I thought I > > might be doing something basically wrong. You input is appreciated. > > > > Richard > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > ivtv-users mailing list > > [email protected] > > http://ivtvdriver.org/mailman/listinfo/ivtv-users > svideo only provies video, no audio > > > > ------------------------------ > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > End of ivtv-users Digest, Vol 26, Issue 40 > ****************************************** >
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
