Hi,

I just upgraded my machine from feisty to gutsy.  My PVR-500 video0 has stopped 
working.  

I've tried the latest v4l-dvb and reverting kernels / ivtv back to 2.6.20 / 
ivtv 10.6 with no luck.

Doing a 

cat /dev/video0 > test.mpg

results in a 0 byte file and 

[ 5452.622475] ivtv0: DMA TIMEOUT 00000001 0


Here's my ivtv init, this is from the default gutsy installed ivtv.

[ 5414.328895] ivtv:  ==================== START INIT IVTV ====================
[ 5414.328900] ivtv:  version 1.0.0 (2.6.22-14-generic SMP mod_unload 586 ) 
loading
[ 5414.329520] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 5414.340958] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18 
(level, high) -> IRQ 19
[ 5415.027276] ivtv0: loaded v4l-cx2341x-enc.fw firmware (4099930936 bytes)
[ 5415.239788] ivtv0: Encoder revision: 0x02060039
[ 5415.249319] tuner 2-0060: TEA5767 detected.
[ 5415.249325] tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[ 5415.249517] tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio)
[ 5415.249830] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 5415.265566] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
[ 5418.692844] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 5418.767035] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 5418.843380] tveeprom 2-0050: Hauppauge model 23552, rev E487, serial# 9646860
[ 5418.843387] tveeprom 2-0050: tuner model is Samsung TCPN 2121P30A (idx 87, 
type 70)
[ 5418.843390] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
[ 5418.843393] tveeprom 2-0050: second tuner model is Philips TEA5768HL FM 
Radio (idx 101, type 62)
[ 5418.843396] tveeprom 2-0050: audio processor is CX25843 (idx 37)
[ 5418.843398] tveeprom 2-0050: decoder processor is CX25843 (idx 30)
[ 5418.843400] tveeprom 2-0050: has radio, has no IR receiver, has no IR 
transmitter
[ 5418.843404] ivtv0: Autodetected WinTV PVR 500 (unit #1)
[ 5418.937426] tuner 2-0061: type set to 70 (Samsung TCPN 2121P30A)
[ 5419.259367] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[ 5419.267270] ivtv0: Registered device video32 for encoder YUV (2 MB)
[ 5419.268456] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[ 5419.269343] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[ 5419.270389] ivtv0: Registered device radio0 for encoder radio
[ 5419.294644] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
[ 5419.295416] ivtv:  ======================  NEXT CARD  ======================
[ 5419.295422] ivtv1: Autodetected Hauppauge card (cx23416 based)
[ 5419.296729] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19 
(level, high) -> IRQ 21
[ 5419.976488] ivtv1: loaded v4l-cx2341x-enc.fw firmware (4099931520 bytes)
[ 5420.191377] ivtv1: Encoder revision: 0x02060039
[ 5420.198659] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
[ 5420.214834] cx25840 3-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #1)
[ 5423.624822] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 5423.698134] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
[ 5423.773077] tveeprom 3-0050: Hauppauge model 23552, rev E487, serial# 9646860
[ 5423.773083] tveeprom 3-0050: tuner model is Samsung TCPN 2121P30A (idx 87, 
type 70)
[ 5423.773086] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
[ 5423.773089] tveeprom 3-0050: second tuner model is Philips TEA5768HL FM 
Radio (idx 101, type 62)
[ 5423.773092] tveeprom 3-0050: audio processor is CX25843 (idx 37)
[ 5423.773094] tveeprom 3-0050: decoder processor is CX25843 (idx 30)
[ 5423.773097] tveeprom 3-0050: has radio, has no IR receiver, has no IR 
transmitter
[ 5423.773100] ivtv1: Correcting tveeprom data: no radio present on second unit
[ 5423.773103] ivtv1: Autodetected WinTV PVR 500 (unit #2)
[ 5423.847643] tuner 3-0061: type set to 70 (Samsung TCPN 2121P30A)
[ 5424.184926] ivtv1: Registered device video1 for encoder MPEG (4 MB)
[ 5424.193715] ivtv1: Registered device video33 for encoder YUV (2 MB)
[ 5424.201693] ivtv1: Registered device vbi1 for encoder VBI (1 MB)
[ 5424.210021] ivtv1: Registered device video25 for encoder PCM audio (1 MB)
[ 5424.232249] ivtv1: Initialized WinTV PVR 500 (unit #2), card #1
[ 5424.232454] ivtv:  ====================  END INIT IVTV  ====================

Any ideas?  Everything was working fine with Feisty.  Thanks,

Ben Bronk
[EMAIL PROTECTED]



_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to