On Dec 4, 2007 1:01 PM, <[EMAIL PROTECTED]> wrote: > Hi, > > I am using a PVR 350 on Mandriva 2008 with a 64 bit box and the 2.6.22 > kernel. IVTV appears to load fine and I am able to capture and view video > outside of Myth. Take note that I am not trying to view on a TV, I just > want to be able to use my monitor for Mythtv. I have attempted two card > selection options in mythtv-setup: the first is the intended MPEG-2 cature > card option for PVR-X50. This choice seems to select okay but when I > start the frontend and attempt to view live TV I get an error when trying > to connect to the video device. If I try the V4L card default option, > everything seems fine, but then on a live TV attempt the screen just goes > black for 30s or so and then nothing. Here is a copy of the IVTV section > of dmesg as well as some of the logging from the backend. Any thoughts? > > Note that I have been fighting to get Myth up on this box for almost a > year now, as my previous attempt involved Mandriva 2007 with the 2.6.17 > kernel which had major issues with IVTV. I am REALLY hoping that this > one will be an easy fix. > > Thx! > Scott > > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 1.0.0 (2.6.22.9-desktop-1mdv SMP mod_unload ) loading > ivtv0: Autodetected Hauppauge card (cx23415 based) > ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> > IRQ 18 > ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02060039 > ivtv0: Decoder revision: 0x02020023 > tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) > tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) > tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) > saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) > msp3400 2-0040: MSP4448G-A2 supports radio, mode is autodetect and autoselect > tveeprom 2-0050: Hauppauge model 48132, rev K268, serial# 9921474 > tveeprom 2-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47) > tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 2-0050: audio processor is MSP4448 (idx 27) > tveeprom 2-0050: decoder processor is SAA7115 (idx 19) > tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter > ivtv0: Autodetected Hauppauge WinTV PVR-350 > tuner 2-0061: type set to 47 (LG NTSC (TAPE series)) > ivtv0: Registered device video0 for encoder MPEG (4 MB) > ivtv0: Registered device video32 for encoder YUV (2 MB) > ivtv0: Registered device vbi0 for encoder VBI (1 MB) > ivtv0: Registered device video24 for encoder PCM audio (1 MB) > ivtv0: Registered device radio0 for encoder radio > ivtv0: Registered device video16 for decoder MPEG (1 MB) > ivtv0: Registered device vbi8 for decoder VBI (1 MB) > ivtv0: Registered device vbi16 for decoder VOUT > ivtv0: Registered device video48 for decoder YUV (1 MB) > ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== > [EMAIL PROTECTED] database]# exit
This really looks like a problem with mythtv. Have you deleted all your cards and started with a new entry? Also can you test your card outside of MythTV? cat /dev/video0 > test.mpg then wait for 10 seconds and hit ctrl-c then mplayer test.mpg or possibly just mplayer /dev/video0 John _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
