Hello, This post is directed towards a previous post on this mailing list named "Remote Control PVR150 -SOLVED" started Thu Dec 6 17:27:53 CET 2007 by a user named 'vb'.
A link to that discussion is here: http://ivtvdriver.org/pipermail/ivtv-users/2007-December/007605.html I am running openSuse 10.3 with a Hauppauge PVR 150 card with the 2.6.22.5-31-default kernel, the same specs as 'vb' from the previous discussion. I'm having the same problem as he was, namely that when I do 'cat /proc/bus/input/devices' I do not see my PVR150 card listed. I read the discussion that followed, but cannot seem to proceed with his solution. I am having trouble following his instructions on fixing this: "I got the opensuse lirc-kernel-module src rpm, unpacked it, added the patch supplied in the lirc mailing list, rebuilt it et voila...success when loading the lirc_i2c module." Could you point me in the right direction here? Any help is greatly appreciated. Tim Here is my ivtv dmesg output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.3 (tagged release) loading ivtv: Linux version: 2.6.22.5-31-default SMP mod_unload 586 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 ivtv i2c driver #0: Test OK ivtv0: Autodetected Hauppauge WinTV PVR-150 ivtv0: reopen i2c bus for IR-blaster support tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
