Hello to all ;-) 

 

I have a pvr500 Dual Tuner Card for mythtv system.

After spending multiple days of searching and reading this is one of the
last chances to fix my problem.

First :-)

This Problem that I describe is not on all channels on tuner 0 and 1.
Allmost 90 % of the generated

mpegs looks good and is playable in mythtv , vlc  ,xine .

 

On tuner 0 and 1 I have a few Channels that generate a mpeg stream that
looks like this .....

 

http://www.wbiag.ch/pics/pvr.bmp <http://www.wbiag.ch/pics/pvr.bmp> 

 

>From over 100 Channels ... 10 looks like the in the above picture 

 

If I look at the Stream-Info it is encoded in native pal dvd resolution
720x576.

 

As I may notice ... most of this spurious channels are on my tuner 1
(connected to a dvb-c receiver ) 

Tuner 0 is direct connected to my cable.

 

My System has a customized Kernel Version 2.6.23.11

 

My settings for the ivtv driver are are following  :

 

-bash-3.1# v4l2-ctl --all -d /dev/video1

Driver Info:

        Driver name   : ivtv

        Card type     : WinTV PVR 500 (unit #2)

        Bus info      : 0000:02:09.0

        Driver version: 65536

        Capabilities  : 0x01030051

                Video Capture

                VBI Capture

                Sliced VBI Capture

                Tuner

                Audio

                Read/Write

Format Video Capture:

        Width/Height  : 720/576

        Pixel Format  : MPEG

        Field         : Interlaced

        Bytes per Line: 0

        Size Image    : 131072

        Colorspace    : Broadcast NTSC/PAL (SMPTE170M/ITU601)

Format Sliced VBI Capture:

        Service Set    :

        Service Line  0:          /

        Service Line  1:          /

        Service Line  2:          /

        Service Line  3:          /

        Service Line  4:          /

        Service Line  5:          /

        Service Line  6:          /

        Service Line  7:          /

        Service Line  8:          /

        Service Line  9:          /

        Service Line 10:          /

        Service Line 11:          /

        Service Line 12:          /

        Service Line 13:          /

        Service Line 14:          /

        Service Line 15:          /

        Service Line 16:          /

        Service Line 17:          /

        Service Line 18:          /

        Service Line 19:          /

        Service Line 20:          /

        Service Line 21:          /

        Service Line 22:          /

        Service Line 23:          /

        I/O Size       : 0

Format VBI Capture:

        Sampling Rate   : 27000000 Hz

        Offset          : 248 samples (9.18519e-06 secs after leading edge)

        Samples per Line: 1440

        Sample Format   : GREY

        Start 1st Field : 6

        Count 1st Field : 18

        Start 2nd Field : 318

        Count 2nd Field : 18

Crop Capability Video Capture:

        Bounds      : Left 0, Top 0, Width 720, Height 576

        Default     : Left 0, Top 0, Width 720, Height 576

        Pixel Aspect: 59/54

Crop Capability Video Output:

        Bounds      : Left 0, Top 0, Width 720, Height 576

        Default     : Left 0, Top 0, Width 720, Height 576

        Pixel Aspect: 59/54

Video input : 4 (Composite 2)

Audio input : 2 (Line In 2)

Frequency: 6400 (400.000000 MHz)

Video Standard = 0x000000ff

        PAL-B/B1/G/H/I/D/D1/K

Tuner:

        Capabilities         : 62.5 kHz multi-standard stereo lang1 lang2

        Frequency range      : 44.0 MHz - 958.0 MHz

        Signal strength      : 99%

        Current audio mode   : lang1

        Available subchannels: mono

-bash-3.1#

 

I  would like to remove this black bars from the few channels without
affecting the other...

Is there a solution for my problem ?

 

With the best greetings from Switzerland ...

Hans Weber 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to