Hi,
I have a similar error. When using the latest ivtv, it doesn't detect
the correct audio mode/subchannels.
See attached output.
Lars.
working sound with kernel 2.6.21.3, v4l/dvb from around 2007-06-02
user.info kernel: [ 56.130336] ivtv: ==================== START INIT IVTV
====================
user.info kernel: [ 56.130993] ivtv: version 1.0.0 (2.6.21.3 SMP preempt
mod_unload 586 ) loading
user.info kernel: [ 56.132146] ivtv0: Autodetected Hauppauge card (cx23416
based)
user.warn kernel: [ 56.133099] PCI: Enabling device 0000:01:09.0 (0014 ->
0016)
user.warn kernel: [ 56.135090] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ
10
user.debug kernel: [ 56.135715] PCI: setting IRQ 10 as level-triggered
user.info kernel: GSI 10 (level, low) -> IRQ 10
user.info kernel: [ 56.977323] ivtv0: loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
user.info kernel: [ 57.197233] ivtv0: Encoder revision: 0x02060039
user.info kernel: [ 57.297868] tveeprom 0-0050: Hauppauge model 26559, rev
C260, serial# 7735902
user.info kernel: [ 57.298513] tveeprom 0-0050: tuner model is LG S001D MK3
(idx 60, type 38)
user.info kernel: [ 57.298995] tveeprom 0-0050: TV standards PAL(B/G) PAL(I)
SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
user.info kernel: [ 57.299507] tveeprom 0-0050: audio processor is CX25843
(idx 37)
user.info kernel: [ 57.299955] tveeprom 0-0050: decoder processor is CX25843
(idx 30)
user.info kernel: [ 57.300449] tveeprom 0-0050: has radio, has no IR
receiver, has no IR transmitter
user.info kernel: [ 57.300912] ivtv0: Autodetected Hauppauge WinTV PVR-150
user.info kernel: [ 57.347991] tuner 0-0043: chip found @ 0x86 (ivtv i2c
driver #0)
user.info kernel: [ 57.358311] tda9887 0-0043: tda988[5/6/7] found @ 0x43
(tuner)
user.info kernel: [ 57.363729] tuner 0-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
user.info kernel: [ 57.441400] cx25840 0-0044: cx25843-23 found @ 0x88 (ivtv
i2c driver #0)
user.info kernel: [ 62.719640] cx25840 0-0044: loaded v4l-cx25840.fw firmware
(16382 bytes)
user.info kernel: [ 62.865043] wm8775 0-001b: chip found @ 0x36 (ivtv i2c
driver #0)
user.info kernel: [ 62.956054] tuner 0-0061: type set to 38 (Philips
PAL/SECAM multi (FM1216ME MK3))
user.info kernel: [ 63.340130] ivtv0: Registered device video0 for encoder
MPEG (4 MB)
user.info kernel: [ 63.351479] ivtv0: Registered device video32 for encoder
YUV (2 MB)
user.info kernel: [ 63.362661] ivtv0: Registered device vbi0 for encoder VBI
(1 MB)
user.info kernel: [ 63.373555] ivtv0: Registered device video24 for encoder
PCM audio (1 MB)
user.info kernel: [ 63.384995] ivtv0: Registered device radio0 for encoder
radio
daemon.notice ntpdate[1210]: step time server 131.234.137.23 offset 0.603873 sec
user.info kernel: [ 63.431268] ivtv0: Initialized Hauppauge WinTV PVR-150,
card #0
user.info kernel: [ 63.431991] ivtv: ==================== END INIT IVTV
====================
mediacenter:~# v4l2-ctl -f 217.250
Frequency set to 3476 (217.250000 MHz)
mediacenter:~# v4l2-ctl --all
Driver info:
Driver name : ivtv
Card type : Hauppauge WinTV PVR-150
Bus info : 0000:01:09.0
Driver version: 65536
Capabilities : 0x01070051
Video Capture
VBI Capture
Sliced VBI Capture
Tuner
Audio
Radio
Read/Write
Format:
Type : Video Capture
Width/Height : 720/576
Pixel Format : MPEG
Field : Interlaced
Bytes per Line: 0
Size Image : 131072
Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format:
Type : Sliced VBI Capture
Service Set :
Service Line 0: /
Service Line 1: /
Service Line 2: /
Service Line 3: /
Service Line 4: /
Service Line 5: /
Service Line 6: /
Service Line 7: /
Service Line 8: /
Service Line 9: /
Service Line 10: /
Service Line 11: /
Service Line 12: /
Service Line 13: /
Service Line 14: /
Service Line 15: /
Service Line 16: /
Service Line 17: /
Service Line 18: /
Service Line 19: /
Service Line 20: /
Service Line 21: /
Service Line 22: /
Service Line 23: /
I/O Size : 0
Format:
Type : VBI Capture
Sampling Rate : 27000000 Hz
Offset : 248 samples (9.18519e-06 secs after leading edge)
Samples per Line: 1440
Sample Format : GREY
Start 1st Field : 6
Count 1st Field : 18
Start 2nd Field : 318
Count 2nd Field : 18
Video input : 0 (Tuner 1)
Audio input : 0 (Tuner 1)
Frequency: 3476 (217.250000 MHz)
Video standard = 0x0000000f
PAL-B/B1/G/H
Tuner:
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength : 99%
Current audio mode : lang1
Available subchannels: stereo
no sound with kernel 2.6.21.3, latest ivtv with udelay=15
user.info kernel: [ 128.471617] ivtv: Start initialization, version 1.2.0
user.info kernel: [ 128.473062] ivtv0: Initializing card #0
user.info kernel: [ 128.473939] ivtv0: Autodetected Hauppauge card (cx23416
based)
user.warn kernel: [ 128.474713] PCI: Enabling device 0000:01:09.0 (0014 ->
0016)
user.warn kernel: [ 128.476667] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ
10
user.debug kernel: [ 128.477267] PCI: setting IRQ 10 as level-triggered
user.info kernel: GSI 10 (level, low) -> IRQ 10
user.info kernel: [ 128.572219] tveeprom 0-0050: Hauppauge model 26559, rev
C260, serial# 7735902
user.info kernel: [ 128.572875] tveeprom 0-0050: tuner model is LG S001D MK3
(idx 60, type 38)
user.info kernel: [ 128.573337] tveeprom 0-0050: TV standards PAL(B/G) PAL(I)
SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
user.info kernel: [ 128.573858] tveeprom 0-0050: audio processor is CX25843
(idx 37)
user.info kernel: [ 128.574322] tveeprom 0-0050: decoder processor is CX25843
(idx 30)
user.info kernel: [ 128.574821] tveeprom 0-0050: has radio, has no IR
receiver, has no IR transmitter
user.info kernel: [ 128.575274] ivtv0: Autodetected Hauppauge WinTV PVR-150
user.info kernel: [ 128.746490] tuner' 0-0043: chip found @ 0x86 (ivtv i2c
driver #0)
user.info kernel: [ 128.747111] tda9887 0-0043: tda988[5/6/7] found
user.info kernel: [ 128.763753] tuner' 0-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
user.info kernel: [ 128.843993] cx25840' 0-0044: cx25843-23 found @ 0x88 (ivtv
i2c driver #0)
user.info kernel: [ 128.888926] wm8775' 0-001b: chip found @ 0x36 (ivtv i2c
driver #0)
user.info kernel: [ 128.903942] tuner-simple 0-0061: type set to 38 (Philips
PAL/SECAM multi (FM1216ME MK3))
user.warn kernel: [ 128.904640] tuner' 0-0043: Tuner frontend module has no
way to set config
user.info kernel: [ 134.226842] cx25840' 0-0044: loaded v4l-cx25840.fw
firmware (16382 bytes)
user.info kernel: [ 134.355420] ivtv0: Registered device video0 for encoder
MPG (4096 kB)
user.info kernel: [ 134.365942] ivtv0: Registered device video32 for encoder
YUV (2048 kB)
user.info kernel: [ 134.376446] ivtv0: Registered device vbi0 for encoder VBI
(1024 kB)
user.info kernel: [ 134.386998] ivtv0: Registered device video24 for encoder
PCM (320 kB)
user.info kernel: [ 134.397415] ivtv0: Registered device radio0 for encoder
radio
user.info kernel: [ 134.398085] ivtv0: Initialized card #0: Hauppauge WinTV
PVR-150
user.info kernel: [ 134.398624] ivtv: End initialization
mediacenter:~# v4l2-ctl -f 217.250
Frequency set to 3476 (217.250000 MHz)
mediacenter:~# v4l2-ctl --all
Driver info:
Driver name : ivtv
Card type : Hauppauge WinTV PVR-150
Bus info : 0000:01:09.0
Driver version: 66048
Capabilities : 0x01070051
Video Capture
VBI Capture
Sliced VBI Capture
Tuner
Audio
Radio
Read/Write
Format:
Type : Video Capture
Width/Height : 720/576
Pixel Format : MPEG
Field : Interlaced
Bytes per Line: 0
Size Image : 131072
Colorspace : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format:
Type : Sliced VBI Capture
Service Set :
Service Line 0: /
Service Line 1: /
Service Line 2: /
Service Line 3: /
Service Line 4: /
Service Line 5: /
Service Line 6: /
Service Line 7: /
Service Line 8: /
Service Line 9: /
Service Line 10: /
Service Line 11: /
Service Line 12: /
Service Line 13: /
Service Line 14: /
Service Line 15: /
Service Line 16: /
Service Line 17: /
Service Line 18: /
Service Line 19: /
Service Line 20: /
Service Line 21: /
Service Line 22: /
Service Line 23: /
I/O Size : 0
Format:
Type : VBI Capture
Sampling Rate : 27000000 Hz
Offset : 248 samples (9.18519e-06 secs after leading edge)
Samples per Line: 1440
Sample Format : GREY
Start 1st Field : 6
Count 1st Field : 18
Start 2nd Field : 318
Count 2nd Field : 18
Video input : 0 (Tuner 1)
Audio input : 0 (Tuner 1)
Frequency: 3476 (217.250000 MHz)
Video standard = 0x0000000f
PAL-B/B1/G/H
Tuner:
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength : 99%
Current audio mode : lang1
Available subchannels: mono lang2
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
