On ma, 2008-01-21 at 22:16 +0300, George Kibardin wrote: > In my cable some of channels are secam and some of channels are pal. My > TV has no problems detecting tv standard, but my Gotview PCI DVD2 Deluxe > behaves a bit strange. > > v4l2-ctl -S gives: > Video Standard = 0x00ff07ff > PAL-B/B1/G/H/I/D/D1/K/M/N/Nc > SECAM-B/D/G/H/K/K1/L/Lc > > When I tune to secam channel v4lctl --log-status gives:
<snip> > ...... > cx25840 1-0044: Detected format: SECAM > cx25840 1-0044: Specified standard: PAL-BDGHI > ..... It looks like the tools ivtv-tune and v4l2-ctl only set the frequency. I looked at the document for the tools and it did not provide any clue. Maybe Hans can shed some light on this? > And I get picture without color and other artifacts. > Of course v4l2-ctl -s secam-d fixes the problem, but I don't understand > why card (of driver) doesn't select standard automatically since it > knows it? It could be by design so you can force the standard when the detection fails. Greets Sander _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
