>>>>> "ivtvdriver" == ivtvdriver  <[EMAIL PROTECTED]> writes:

 ivtvdriver> The last time it froze, I got

 ivtvdriver> ivtv0: Stereo mode changed i2c_adapter i2c-2: sendbytes:
 ivtvdriver> error - bailout. msp3400 2-0040: I/O error #0 (read
 ivtvdriver> 0x10/0x200) ivtv0: Stereo mode changed

 ivtvdriver>   at the tail end of dmesg.

 ivtvdriver> (and I lost sound, which sounds like msp3400 went *poof*)

The card I have was having the exact same behavior. I will report back
when I finish testing in windows.

Later,

Alan


 ivtvdriver> At 11:06 PM 1/21/2008, Rick Steeves wrote:

 >> Only the video freezes. I can still ssh into the machine. I can
 >> even escape out of Mythtv back to the menu (on the monitor), and
 >> then resume watching television on TV Out.
 >> 
 >> (Although if I exit right out, and then immediately go back in,
 >> the stutter/freeze starts almost immediately. If I give it a
 >> minute or so, I'm good.)
 >> 
 >> Feels a lot like a resource problem, but the CPU is around 5%, and
 >> plenty of memory still available in cache, and plenty of drive
 >> space.
 >> 
 >> I suspected heat maybe, but there's plenty of room for air to
 >> circulate, and there's a fan blowing directly on the PVR
 >> 
 >> Rick
 >> 
 >> 
 >> 
 >> At 10:38 PM 1/21/2008, A. P. Kennedy wrote:
 >>> >>>>> "i" == ivtvdriver <[EMAIL PROTECTED]> writes:
 >>> 
 i> So I've finally gotten Mythtv all up and working, TV-out/audio on
 i> my PVR-350 and everything! (CentOS5)
 >>>
 i> And it works great, for about a half hour to an hour. Then it
 i> "stutters" a few times, and freezes.
 >>>
 i> If I exit out of Watch TV, and go right back in, same problem. If
 i> I exit, give it a few minutes, and then start again, it works
 i> fine, for about another hour.
 >>>
 i> Sometimes when it freezes and I exit it, and start it back up, I
 i> lose sound to the TV Out.
 >>>
 i> If I change it from TV-Out (/dev/video16) to the monitor
 i> (/dev/video4) it appears to work for long periods of time.
 >>>
 i> I am getting many of these messages from dmesg: i2c_adapter i2c-2:
 i> sendbytes: error - bailout.
 >>>
 i> Atn the point that it last failed, I got: ivtv0: Stereo mode
 i> changed
 >>>  Question: Does the recording part work fine when the
 >>> mythtvfrontend freezes? Can you still ssh to the computer?
 >>> 
 >>> Later
 >>> 
 >>> Alan
 >>> 
 >>> 
 >>> _______________________________________________ ivtv-users
 >>> mailing list [email protected]
 >>> http://ivtvdriver.org/mailman/listinfo/ivtv-users




 ivtvdriver> Rick Steeves [EMAIL PROTECTED] http://www.sinister.net

 ivtvdriver> A bicycle sails aim-irelandbybicycle On an ocean of
 ivtvdriver> freedom yahoo-ricksteeves I am the captain
 ivtvdriver> [EMAIL PROTECTED]


 ivtvdriver> _______________________________________________
 ivtvdriver> ivtv-users mailing list [email protected]
 ivtvdriver> http://ivtvdriver.org/mailman/listinfo/ivtv-users

_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users

Reply via email to