Hello, For my work i have to install the Avermedia EZmaker PCI Deluxe on a ubuntu or kubuntu server. I think i have installed the drivers correctly, because when i do dmesg | grep ivtv i get :
[ 11.360000] ivtv: Start initialization, version 1.2.0 [ 11.360000] ivtv0: Initializing card #0 [ 11.360000] ivtv0: Autodetected AVerMedia EZMaker PCI Deluxe card (cx23416 based) [ 11.360000] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 11.400000] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 11.400000] wm8739 0-001a: chip found @ 0x34 (ivtv i2c driver #0) [ 11.408000] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 11.408000] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 11.408000] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 11.408000] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 11.408000] ivtv0: Initialized card #0: AVerMedia EZMaker PCI Deluxe [ 11.408000] ivtv: End initialization [ 54.652000] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 54.852000] ivtv0: Encoder revision: 0x02060039 Now i try to test it with the command : cat /dev/video0 and the after 10 seconds i wanne play it and the screen is black and it stays that way. I have check the cabled and i add another input device at the videocard. So i try vlc to open the device. I try it with the v4l driver and with the pvr but none of this would work. Does somebody have a solution for this ? Or a suggestion ? Greetz Sander _________________________________________________________________ De leukste online filmpjes vind je op MSN Video! http://video.msn.com/video.aspx?mkt=nl-nl _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
