----- Original Message ---- > From: Andy Walls <[EMAIL PROTECTED]> > To: User discussion about IVTV <[email protected]>; Michael <[EMAIL > PROTECTED]> > Sent: Tuesday, June 3, 2008 9:26:24 PM > Subject: Re: [ivtv-users] CX18: What Next? > > On Tue, 2008-06-03 at 14:31 -0700, Michael wrote: > > > I would like to apologize first off for the slow response. I somehow > > missed > this message in my inbox, and when I went back to check today, I found it. > > > > When I run make, with this patch applied, I get the following error: > > CC [M] > > /home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.o > > /home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.c: In > function 'cx18_gpio_i2c_slave_reset': > > /home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.c:73: > > error: > 'gpio_val' undeclared (first use in this function) > > /home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.c:73: > > error: > (Each undeclared identifier is reported only once > > /home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.c:73: > > error: > for each function it appears in.) > > The cx18-gpio.c file has had a few fixes in it since I posted the patch. > Since you're using a very recent v4l-dvb tree, attached is a new version > of the patch. (You'll need to back out the old version that's causing > compile errors.) > I once again would like to apologize for the slow response. I'm not sure how I missed that message in my inbox. > > > make[3]: *** > [/home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.o] Error 1 > > make[2]: *** > > [_module_/home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l] > Error 2 > > make[2]: Leaving directory `/usr/src/linux-2.6.22.17.tex2' > > make[1]: *** [default] Error 2 > > make[1]: Leaving directory > `/home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l' > > make: *** [all] Error 2 > > > > It seems to compile fine without the patch. > > > > I tried compiling this without the other two patches, if you want, I'll > > find > those patches, and try again. > > No, not at this time. Just this cx18-i2c-gpio-reset2.patch. > > Let me know how it goes. > It compiled fine this time. However, after running modprobe cx18, heres the dmesg:
Linux video capture interface: v2.00 cx18: Start initialization, version 1.0.0 cx18-0: Initializing card #0 cx18-0: Autodetected Hauppauge card cx18-0: cx23418 revision 01010000 (B) tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom. cx18-0: Invalid EEPROM cx18-0: VBI is not yet supported cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) cx18-0: Disabled encoder IDX device videodev: "" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ cx18-0: Registered device video0 for encoder MPEG (2 MB) DVB: registering new adapter (cx18). MXL5005S: Attached at address 0x63 DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx18-0: DVB Frontend registered videodev: "" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ cx18-0: Registered device video32 for encoder YUV (2 MB) videodev: "" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ cx18-0: Registered device video24 for encoder PCM audio (1 MB) videodev: "" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ cx18-0: Registered device radio-64 for encoder radio cx18-0: Initialized card #0: Hauppauge HVR-1600 cx18: End initialization Thanks again for the help. I greatly appreciate it, and maybe eventually I'll be able to delete my Windows XP partition. (This is the last thing really I have left for the switch.) > > Regards, > Andy _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
