On Tue, 2008-06-03 at 20:22 -0700, Michael wrote: > I once again would like to apologize for the slow response. I'm not sure how > I missed that message in my inbox.
Thank you. Really though, the delay didn't bother me. > > > make[3]: *** > > [/home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l/cx18-gpio.o] Error > > 1 > > > make[2]: *** > > > [_module_/home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l] > > Error 2 > > > make[2]: Leaving directory `/usr/src/linux-2.6.22.17.tex2' > > > make[1]: *** [default] Error 2 > > > make[1]: Leaving directory > > `/home/michael/Programs/TVTuner/v4l-dvb-bef996fa0ded/v4l' > > > make: *** [all] Error 2 > > > > > > It seems to compile fine without the patch. > > > > > > I tried compiling this without the other two patches, if you want, I'll > > > find > > those patches, and try again. > > > > No, not at this time. Just this cx18-i2c-gpio-reset2.patch. OK. Now try the other two patches as well. I don't have high hopes though. > > Let me know how it goes. > > > It compiled fine this time. However, after running modprobe cx18, heres the > dmesg: > > Linux video capture interface: v2.00 > cx18: Start initialization, version 1.0.0 > cx18-0: Initializing card #0 > cx18-0: Autodetected Hauppauge card > cx18-0: cx23418 revision 01010000 (B) > tveeprom 0-0050: Encountered bad packet header [00]. Corrupt or not a > Hauppauge eeprom. > cx18-0: Invalid EEPROM > cx18-0: VBI is not yet supported > cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) > cx18-0: Disabled encoder IDX device > videodev: "" has no release callback. Please fix your driver for proper sysfs > support, see http://lwn.net/Articles/36850/ > cx18-0: Registered device video0 for encoder MPEG (2 MB) > DVB: registering new adapter (cx18). > MXL5005S: Attached at address 0x63 > DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... > cx18-0: DVB Frontend registered > videodev: "" has no release callback. Please fix your driver for proper sysfs > support, see http://lwn.net/Articles/36850/ > cx18-0: Registered device video32 for encoder YUV (2 MB) > videodev: "" has no release callback. Please fix your driver for proper sysfs > support, see http://lwn.net/Articles/36850/ > cx18-0: Registered device video24 for encoder PCM audio (1 MB) > videodev: "" has no release callback. Please fix your driver for proper sysfs > support, see http://lwn.net/Articles/36850/ > cx18-0: Registered device radio-64 for encoder radio > cx18-0: Initialized card #0: Hauppauge HVR-1600 > cx18: End initialization The "videodev:" messages bug me. Can you check to make sure you don't have duplicate tuner, tveeprom, videodev, etc., modules lying around for the same kernel under /lib/modules/(kernelver)/? > Thanks again for the help. I greatly appreciate it, and maybe eventually > I'll be able to delete my Windows XP partition. (This is the last thing > really I have left for the switch.) Regards, Andy _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
