I have also disabled hypertreading in grub. I am running debian unstable -- Linux slim 2.6.25-2-686 #1 SMP Fri Jun 27 03:23:20 UTC 2008 i686 GNU/Linux -- slim:~# modinfo ivtv filename: /lib/modules/2.6.25-2-686/kernel/drivers/media/video/ivtv/ivtv.ko version: 1.2.0 -- slim:~# dmesg | grep ivtv [ 4.402172] ivtv: Start initialization, version 1.2.0 [ 4.442561] ivtv0: Initializing card #0 [ 4.442566] ivtv0: Autodetected Hauppauge card (cx23415 based) [ 4.443302] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 4.496003] ivtv0: Autodetected Hauppauge WinTV PVR-350 [ 4.709433] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) [ 4.869575] saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) [ 4.878002] msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0) [ 4.879424] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 4.893298] ivtv0: Registered device video0 for encoder MPG (32768 kB) [ 4.893320] ivtv0: Registered device video32 for encoder YUV (16384 kB) [ 4.893340] ivtv0: Registered device vbi0 for encoder VBI (16384 kB) [ 4.893359] ivtv0: Registered device video24 for encoder PCM (1024 kB) [ 4.893378] ivtv0: Registered device radio0 for encoder radio [ 4.893401] ivtv0: Registered device video16 for decoder MPG (1024 kB) [ 4.893420] ivtv0: Registered device vbi8 for decoder VBI (64 kB) [ 4.893440] ivtv0: Registered device vbi16 for decoder VOUT [ 4.893461] ivtv0: Registered device video48 for decoder YUV (1024 kB) [ 4.893464] ivtv0: Initialized card #0: Hauppauge WinTV PVR-350 [ 4.893488] ivtv: End initialization [ 5.029859] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 5.055573] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes) [ 5.072328] ivtv0: Encoder revision: 0x02060039 [ 5.072328] ivtv0: Decoder revision: 0x02020023 [ 5.744048] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes) [ 5.832524] ivtvfb0: Framebuffer at 0xe9510000, mapped to 0xf9890000, size 1665k [ 5.932850] ivtvfb0: Framebuffer registered on ivtv card id 0
2008/8/3 Peter Michael Jensen <[EMAIL PROTECTED]> > Hi all > Really hope you can help with this issue. > > When I make a "cat /dev/video0 > /mnt/media/video/test.mpg" everything > seems fine but when it runs for a long time it suddently stops caturing > video (sometimes 30 minutes sometimes 1,5 hours, etc.). I just stops without > any dmesg, etc. > > I have tried "everything" - including: > - totally new hardware - including new pvr350 (!) > - adjust ivtv parameters (increasing all buffers) > - logging etc. > > I think the above stopping of capturing results in a mythtv-system halt. > Because when I activate mythtv and records a show everything is fine until > somewhat the same time that the cat stops capturing. Can there be a > connection? > > Any good ideas for debugging this issue? > > Thanks in advance > Peter Michael >
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
