Hi, I bought the HVR-1600 card about a week ago, but I've been unable to get it working on my mythtv server. I've tried it on a different computer where it worked in Vista. It also worked on Fedora 9 (same as the mythtv server) with the same drivers as on the mythtv server. I also have a PVR-150 card in the mythtv server from before. The PVR-150 been working the whole time while I've been playing around with the HVR-1600.
I'm using the latest v4l-dvb drivers (from the official mercurial repository). Initially I had problems detecting the card, but it looks like the mmio_ndelay setting (152) corrected that: cx18-0: Initializing card #0 cx18-0: Autodetected Hauppauge card ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21 cx18-0: cx23418 revision 01010000 (B) tveeprom 4-0050: Hauppauge model 74541, rev C6B6, serial# 3484150 tveeprom 4-0050: MAC address is 00-0D-FE-35-29-F6 tveeprom 4-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43) tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 4-0050: audio processor is CX23418 (idx 38) tveeprom 4-0050: decoder processor is CX23418 (idx 31) tveeprom 4-0050: has radio cx18-0: Autodetected Hauppauge HVR-1600 cx18-0: VBI is not yet supported tuner 5-0043: chip found @ 0x86 (cx18 i2c driver #0-1) tda9887 5-0043: creating new instance tda9887 5-0043: tda988[5/6/7] found tuner 5-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) cs5345 4-004c: chip found @ 0x98 (cx18 i2c driver #0-0) tuner-simple 5-0061: creating new instance tuner-simple 5-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F)) cx18-0: Disabled encoder IDX device cx18-0: Registered device video0 for encoder MPEG (2 MB) DVB: registering new adapter (cx18) firmware: requesting v4l-cx23418-apu.fw MXL5005S: Attached at address 0x63 DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... cx18-0: DVB Frontend registered cx18-0: Registered device video32 for encoder YUV (2 MB) cx18-0: Registered device video24 for encoder PCM audio (1 MB) cx18-0: Registered device radio0 for encoder radio cx18-0: Initialized card #0: Hauppauge HVR-1600 cx18: End initialization cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) firmware: requesting v4l-cx23418-cpu.fw cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) firmware: requesting v4l-cx23418-apu.fw firmware: requesting v4l-cx23418-cpu.fw firmware: requesting v4l-cx23418-dig.fw cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) When I try to capture some data (cat /dev/video0 > test.mpg) I get nothing (filesize is 0). The same happens if I try to record something on mythtv (The PVR-150 still records fine). Let me know if there is any other information that would be useful. Thanks, Oystein Thorsen _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
