On Wed, 2009-02-18 at 10:00 -0800, Scott Harris wrote: > Howdy all, > What is the correct setting in mythtv for an HVR 1600 card type? > I've seen references to just using the standard "MPEG-2 encoder > (PVR-x50, PVR-500)
That is indeed the correct setting for an HVR-1600. The PVR-350 is based on the CX23415 The PVR-[12]50 is based on the CX23416 (usually) The PVR-500 is based on two CX23416's The HVR-1600 is based on the CX23418 The chips' MPEG output streams are virutally identical and the linux cx18 driver has direct lineage to the ivtv driver. > and also references to the V4L device. That's for uncompress video. From the cx18 driver that would come via /dev/video32 IIRC and would be the somewhat oddball HM12 raw format with no sound. You don't want that. > This is connecting directv via svideo. The reason I ask is when > I pick the MPEG-2 encoder type I need to manually enter /dev/video0 > before it probes and discovers the device. The V4L entry shows > up as expected. Pester the MythTV folks for proper support. :) Regards, Andy > Thanks, > > Scott > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
