Andy Walls wrote: > On Wed, 2009-02-18 at 10:00 -0800, Scott Harris wrote: >> Howdy all, >> What is the correct setting in mythtv for an HVR 1600 card type? >> I've seen references to just using the standard "MPEG-2 encoder >> (PVR-x50, PVR-500) > > That is indeed the correct setting for an HVR-1600.
Excellent, thanks. > >> and also references to the V4L device. > > That's for uncompress video. From the cx18 driver that would come > via /dev/video32 IIRC and would be the somewhat oddball HM12 raw format > with no sound. You don't want that. That certainly explains the video without audio problems. > > >> This is connecting directv via svideo. The reason I ask is when >> I pick the MPEG-2 encoder type I need to manually enter /dev/video0 >> before it probes and discovers the device. The V4L entry shows >> up as expected. > > Pester the MythTV folks for proper support. :) > Next on the list ;) Just wanted to make sure I was in the right before I throw wild accusations and bug reports. Thanks! Scott _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
