I am running MythTV via atrpms packages on a CentOS 5.3 install. I have a PVR-250, a PVR-500 and a HD HomeRun. I am getting random reboots when capturing from the PVR-500. There are no problems when capturing from the PVR-250. It is not a MythTV issue as it occurs when I just cat from the appropriate /dev/videoX device file. There are no messages on the console or in /var/log/messages. All of a sudden the machine reboots and I'm looking at the BIOS startup screen. The problem has persisted through kernel updates. It started not long after I installed a new motherboard and processor due to the old one dying. So, I'm thinking chip issue or something like that.
Any ideas will be greatly appreciated. Ken Processor: AMD Athlon(tm) 64 Processor 3000+ Motherboard: ASUS K8V-X SE Distro: CentOS 5.3 Kernel: 2.6.18-128.1.10.el5 (stock) ivtv-0.10.6-132.el5 ivtv-firmware-20080701-18 ivtv-kmdl-2.6.18-128.1.10.el5-0.10.6-132.el5 perl-Video-ivtv-0.13-8.0.el5 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.6 (tagged release) loading ivtv: Linux version: 2.6.18-128.1.10.el5 SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 185 input: PC Speaker as /class/input/input0 via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 1-0050: Hauppauge model 32031, rev B110, serial# 6790025 tveeprom 1-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is MSP3435 (idx 10) tveeprom 1-0050: decoder processor is SAA7115 (idx 19) tveeprom 1-0050: has no radio, has IR remote ivtv0: Autodetected Hauppauge WinTV PVR-250 tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) msp3400 1-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) msp3400 1-0040: MSP3435G-B6 supports radio, mode is autodetect and autoselect ivtv0: Registered device video0 for encoder MPEG (16 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (8 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) tuner 1-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv0: Initialized Hauppauge WinTV PVR-250, card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 19 (level, low) -> IRQ 193 ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv1: Encoder revision: 0x02060039 tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 2-0060: TEA5767 detected. tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #1) tuner 2-0060: type set to 62 (Philips TEA5767HN FM Radio) tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) tveeprom 2-0050: Hauppauge model 23552, rev D492, serial# 7855863 tveeprom 2-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 2-0050: audio processor is CX25843 (idx 37) tveeprom 2-0050: decoder processor is CX25843 (idx 30) tveeprom 2-0050: has radio, has no IR remote ivtv1: Autodetected WinTV PVR 500 (unit #1) cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: Registered device video1 for encoder MPEG (16 MB) ivtv1: Registered device video33 for encoder YUV (2 MB) ivtv1: Registered device vbi1 for encoder VBI (8 MB) ivtv1: Registered device video25 for encoder PCM audio (1 MB) ivtv1: Registered device radio1 for encoder radio tuner 2-0061: type set to 57 (Philips FQ1236A MK4) ivtv1: Initialized WinTV PVR 500 (unit #1), card #1 PCI: Enabling device 0000:00:11.5 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:11.5 to 64 ivtv: ====================== NEXT CARD ====================== ivtv2: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 209 codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] codec_read: codec 0 is not valid [0xfe0000] ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv2: Encoder revision: 0x02060039 tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #2) tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner) tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2) cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes) wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #2) tveeprom 3-0050: Hauppauge model 23552, rev D492, serial# 7855863 tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) tveeprom 3-0050: audio processor is CX25843 (idx 37) tveeprom 3-0050: decoder processor is CX25843 (idx 30) tveeprom 3-0050: has radio, has no IR remote ivtv2: Correcting tveeprom data: no radio present on second unit ivtv2: Autodetected WinTV PVR 500 (unit #2) ivtv2: Registered device video2 for encoder MPEG (16 MB) ivtv2: Registered device video34 for encoder YUV (2 MB) ivtv2: Registered device vbi2 for encoder VBI (8 MB) ivtv2: Registered device video26 for encoder PCM audio (1 MB) tuner 3-0061: type set to 57 (Philips FQ1236A MK4) ivtv2: Initialized WinTV PVR 500 (unit #2), card #2 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 217 eth0: VIA Rhine II at 0xfaa00000, 00:15:f2:41:46:a9, IRQ 217. eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 225 r8169 0000:00:0d.0: no PCI Express capability eth1: RTL8169sb/8110sb at 0xf89de000, 00:19:e0:73:18:31, XID 10000000 IRQ 225 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
