My answers are below..
On 7/23/09 8:28 PM, "Andy Walls" <[email protected]> wrote: > On Thu, 2009-07-23 at 17:19 -0400, Tom Ryan wrote: >> > Well, it worked good for a day and then started sync issues again. We >> > have narrowed the issue down to the particular device connected to the >> > analog composite input (a sony SSC-DC374 camera). If we connect a vcr >> > or a sony handycam to the cable, all is perfect. If we connect a tv >> > (instead of the card) to the cable, the output from the SSC is >> > perfect. >> > >> > The camera has an AGC (automatic gain correction) as well as a level >> > adjustment. We have tried adjusting them to various levels and >> > settings to no avail. (We have not worked the full gamut though :) >> > >> > Any ideas, an option to the module load, etc that we're missing??? > > 1. What card are you using? > 2. What driver version are you using? > > Driver name : cx18 > Card type : Hauppauge HVR-1600 > Bus info : PCI:0000:01:08.0 > Driver version: 66048 > > > 3. How did you "up the gain on the cards" before? > > -c cx23418 -s 0x104 0x1 > > 4. What is the output of v4l2-ctl -d /dev/videoN --log-status when you > don't have horizontal lock and when you do? > > no change > > 5. Do you have an oscilliscope to look at the video signal coming out > from the SSC-DC374 to compare it with a known working video signal? > (It'll take the guessing out of troubleshooting) > > I do not. The patch didn¹t help.. > > in case this helps > I found a user with the similar issue with another hauppauge card. http://www.videohelp.com/forum/archive/hsync-issue-on-composite-capture-pvr5 00-t334215.html?layout=0&layoutalign=Center ??????? Should I just get new cameras? Are there ones that people know will work??? :) Thanks! Tom
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
