Thanks for the help Andy. Upgraded to the latest driver per your suggestion and looks like everything is in good shape. I still have to do some more testing, but it looks like it at least setup the /dev/video1 and initialized the card.
Thanks! -Eric > On Mon, 2009-09-28 at 13:46 -0400, Eric A. Boney wrote: > > I have attempted to add a 2nd HVR-1600 tuner to one of my Myth Slave > > backends. At first it was not working at all and I did some research and > > found that I needed to add the following line to my kernel start up: > > > > vmalloc=512m > > That should be sufficient. (FYI You only need 64 MB per card of vmalloc > address space - not real memory - to map in the register set of each > card. Vmalloc space is used to give real memory to loadable modules and > for video buffer allocations.) > > > After doing this I still can't get the box to add /dev/video1 or be able > > to use the tuner card. I was wondering if anyone had any other solutions > > at this point. I am attaching the output of the dmesg for the cards. The > > machine is a Quad Core, with 4GB of memory, running Ubuntu 9.04. If there > > is anything else that might be helpful., please just ask. > > Driver versions below 1.0.4 (IIRC) are known to have communication > problems from CPU to the card. Please upgrade to the latest driver from > the v4l-dvb repository. See the instructions here: > > http://www.ivtvdriver.org/index.php/Cx18#Obtaining_the_driver > > You may wish to back up your current kernel video modules first, before > going through with the "make install". > > Regards, > Andy > > > Thanks, > > -Eric > > > > [ 8.222390] cx18: Start initialization, version 1.0.1 > > [ 8.222420] cx18-0: Initializing card #0 > > [ 8.222422] cx18-0: Autodetected Hauppauge card > > [ 8.222468] cx18 0000:02:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ > > 21 [ 8.222477] cx18-0: Unreasonably low latency timer, setting to 64 > > (was 2) [ 8.224372] cx18-0: cx23418 revision 01010000 (B) > > [ 8.452513] cx18-0: Autodetected Hauppauge HVR-1600 > > [ 8.452515] cx18-0: VBI is not yet supported > > [ 8.540170] tuner 1-0061: chip found @ 0xc2 (cx18 i2c driver #0-1) > > [ 8.540191] cs5345 0-004c: chip found @ 0x98 (cx18 i2c driver #0-0) > > [ 8.556587] cx18-0: Disabled encoder IDX device > > [ 8.556634] cx18-0: Registered device video0 for encoder MPEG (2 MB) > > [ 8.556637] DVB: registering new adapter (cx18) > > [ 8.636391] cx18-0: DVB Frontend registered > > [ 8.636409] cx18-0: Registered device video32 for encoder YUV (2 MB) > > [ 8.636428] cx18-0: Registered device video24 for encoder PCM audio (1 > > MB) [ 8.636430] cx18-0: Initialized card #0: Hauppauge HVR-1600 > > [ 8.636443] cx18-1: Initializing card #1 > > [ 8.636446] cx18-1: Autodetected Hauppauge card > > [ 8.636482] cx18 0000:02:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 [ 8.636491] cx18-1: Unreasonably low latency timer, setting to 64 > > (was 2) [ 8.638370] cx18-1: cx23418 revision 01010000 (B) > > [ 8.860323] cx18-1: Autodetected Hauppauge HVR-1600 > > [ 8.860324] cx18-1: VBI is not yet supported > > [ 8.935378] tuner 3-0061: chip found @ 0xc2 (cx18 i2c driver #1-1) > > [ 8.935397] cs5345 2-004c: chip found @ 0x98 (cx18 i2c driver #1-0) > > [ 8.939268] cx18-1: Disabled encoder IDX device > > [ 8.939305] cx18-1: Registered device video1 for encoder MPEG (2 MB) > > [ 8.939306] DVB: registering new adapter (cx18) > > [ 8.940656] cx18-1: frontend initialization failed > > [ 8.940813] cx18-1: DVB failed to register > > [ 8.940854] cx18-1: Registered device video33 for encoder YUV (2 MB) > > [ 8.940908] cx18-1: Registered device video25 for encoder PCM audio (1 > > MB) [ 8.941109] cx18-1: Error -1 registering devices > > [ 8.941453] cx18-1: Error -1 on initialization > > [ 8.941461] cx18: probe of 0000:02:01.0 failed with error -1 > > [ 8.941498] cx18: End initialization > > [ 181.288043] cx18 0000:02:00.0: firmware: requesting v4l-cx23418-apu.fw > > [ 181.483652] cx18-0: loaded v4l-cx23418-apu.fw firmware V00120000 > > (141200 bytes) > > [ 181.980133] cx18 0000:02:00.0: firmware: requesting v4l-cx23418-cpu.fw > > [ 182.096113] cx18-0: loaded v4l-cx23418-cpu.fw firmware (158332 bytes) > > [ 182.102446] cx18-0: FW version: 0.0.74.0 (Release 2007/03/12) > > [ 182.300029] cx18 0000:02:00.0: firmware: requesting v4l-cx23418-apu.fw > > [ 182.900093] cx18 0000:02:00.0: firmware: requesting v4l-cx23418-cpu.fw > > [ 183.212108] cx18 0000:02:00.0: firmware: requesting v4l-cx23418-dig.fw > > [ 183.398607] cx18-0: loaded v4l-cx23418-dig.fw firmware (16382 bytes) _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
