I had a similar issue, what I did was remove the card and reinsert it (reseating) and it seemed to work fine.
On Fri, Mar 12, 2010 at 8:49 PM, Peter Klimas <[email protected]>wrote: > Hi, I have a Hauppage WinTV-HVR-1600 (Digital + Analog tuners with IR > receiver). The card appeared > to work fine until my last kernel update (upgraded to 2.6.32.9). Since > then, I have also > upgraded the v4l-dvb modules to v4l-dvb-e50bb36f881c. Unfortunately, > still no success. > > Now I only get the following output during boot: > cx18: Start initialization, version 1.4.0 > cx18: End initialization > > After some digging, I found that > http://pci-ids.ucw.cz/read/PC/0070/7444 lists the > Hauppage 1600 as: > Hauppauge's HVR-1600 board, PCI ID 14f1:5b7a, Subsystem 0070:7444 > > Unfortunately, this is NOT what my card returns, output from my lspci > is below and clearly > shows the ID as 597a NOT 5b7a. Could this be why the card isn't > working anymore or > should I be looking for the problem somewhere else (hardware failure etc.)? > > Any help would be appreciated, > Many thanks, > Peter > > > lspci verbose output below > > ---------------------------------------------------------------------------------- > 00:0a.0 Multimedia video controller: Conexant Systems, Inc. Device 597a > Subsystem: Hauppauge computer works Inc. Device 7444 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR+ INTx- > Latency: 32 (500ns min, 50000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=64M] > Capabilities: [44] Vital Product Data > pcilib: sysfs_read_vpd: read failed: Connection timed out > Not readable > Capabilities: [4c] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > -- Darren Blaber
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
