Andy,
Thanks for the response. Is it media_tree or media_build that I need? The
instructions at
http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
and the message from Devin H. seem to suggest that it's media_build. Plus I'd
prefer to add a
module to my current kernel instead of building a whole new one, if possible.
At any rate, when I follow the media_build instructions, the Kinect driver
gives compilation errors.
/home/jetson/adm/v4l/media_build/v4l/kinect.c:38:19: error: 'D_ERR' undeclared
here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:38:27: error: 'D_PROBE'
undeclared here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:38:37: error: 'D_CONF' undeclared
here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:38:46: error: 'D_STREAM'
undeclared here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:38:57: error: 'D_FRAM' undeclared
here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:38:66: error: 'D_PACK' undeclared
here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:39:2: error: 'D_USBI' undeclared
here (not in a
function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:39:11: error: 'D_USBO' undeclared
here (not in a function)
/home/jetson/adm/v4l/media_build/v4l/kinect.c:39:20: error: 'D_V4L2' undeclared
here (not in a function)
I tried installing the OpenNI software from the Fedora 14 repo (openni,
openni-primesense, and
openni-devel) but it doesn't seem to supply the missing symbols. Perhaps the
latest OpenNI Git
repo will supply the necessary bits, but short of that, I'd like to just omit
the Kinect driver. I tried the
"Manually Intensive" approach so that I could get to "make menuconfig" but at
the step
make tar DIR=<some dir with media -git tree>
I'm not sure what I'm supposed to supply in the DIR variable.
>________________________________
>Hi,
>
>You really do need the bleeding edge cx18 and tda8290 driver from the
>media_tree git repository. The changes will be in either kernel v2.6.39 or
>2.6.40 (I can't remember which right now).
>
>The cx18 driver will report its version as 1.4.1 or greater.
>
>Regards,
>Andy
>
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
