Hi Eric,
(adding the list back to the Cc:)
On Sat, 2011-06-04 at 10:12 -0700, Eric Morgan wrote:
> Hi Andy, Thanks so much for the help.
You're welcome.
>
> Here's the log:
> server:~$ v4l2-ctl -d /dev/video0 --log-status
This doesn't include all the messages that you get upon module load, but
honestly things appear to be OK from that perspective. I have some
comments/questions on the log below:
> Status Log:
>
> [45978.023303] cx18-0: ================= START STATUS CARD #0
> =================
> [45978.023308] cx18-0: Version: 1.5.0 Card: Hauppauge HVR-1600
> [45978.065888] tveeprom 14-0050: Hauppauge model 74301, rev F1F5, serial#
> [redacted]
> [45978.065892] tveeprom 14-0050: MAC address is [redacted]
> [45978.065895] tveeprom 14-0050: tuner model is NXP 18271C2 (idx 155, type
> 54)
> [45978.065899] tveeprom 14-0050: TV standards PAL(B/G) NTSC(M) PAL(I)
> SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
> [45978.065902] tveeprom 14-0050: audio processor is CX23418 (idx 38)
> [45978.065905] tveeprom 14-0050: decoder processor is CX23418 (idx 31)
> [45978.065908] tveeprom 14-0050: has no radio, has IR receiver, has IR
> transmitter
^^
There are at least 15 I2C busses in your system. That's alot. I am
going to assume there are a lot of various PCI/PCIe cards and/or USB
peripherials installed in this machine.
> [45978.065915] cx18-0 843: Video signal: not present
The meaning of this is very clear. The CX25843 core inside the CX23418
cannot get enough valid horizontal and vertical video sync pulses from
the analog video signal at the input of the CX23418 chip.
This can happen for a number of reasons, but first....
> [45978.065917] cx18-0 843: Detected format: NTSC-M
> [45978.065919] cx18-0 843: Specified standard: NTSC-M
> [45978.065921] cx18-0 843: Specified video input: S-Video (Luma In1,
> Chroma In5)
Do you have a known good S-Video source hooked up with an active signal
and a known good cable?
> [45978.065924] cx18-0 843: Specified audioclock freq: 48000 Hz
> [45978.065934] cx18-0 843: Detected audio mode: mono
> [45978.065936] cx18-0 843: Detected audio standard: no detected audio
> standard
> [45978.065938] cx18-0 843: Audio muted: no
> [45978.065940] cx18-0 843: Audio microcontroller: stopped
> [45978.065942] cx18-0 843: Configured audio standard: automatic detection
> [45978.065944] cx18-0 843: Configured audio system: BTSC
> [45978.065946] cx18-0 843: Specified audio input: External
> [45978.065948] cx18-0 843: Preferred audio mode: stereo
> [45978.066488] cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003801, value
> 0x00003801
> [45978.068758] cs5345 14-004c: Input: 2
> [45978.068760] cs5345 14-004c: Volume: 0 dB
> [45978.068763] cx18-0: Video Input: S-Video 1
> [45978.068765] cx18-0: Audio Input: Line In 1
> [45978.068768] cx18-0: GPIO: direction 0x00003801, value 0x00003801
> [45978.068770] cx18-0: Tuner: TV
> [45978.068773] cx18-0: Stream Type: MPEG-2 Program Stream
> [45978.068776] cx18-0: Stream VBI Format: No VBI
> [45978.068779] cx18-0: Audio Sampling Frequency: 48 kHz
> [45978.068782] cx18-0: Audio Encoding: MPEG-1/2 Layer II
> [45978.068785] cx18-0: Audio Layer II Bitrate: 224 kbps
> [45978.068787] cx18-0: Audio Stereo Mode: Stereo
> [45978.068790] cx18-0: Audio Stereo Mode Extension: Bound 4 (inactive)
> [45978.068793] cx18-0: Audio Emphasis: No Emphasis
> [45978.068796] cx18-0: Audio CRC: No CRC
> [45978.068798] cx18-0: Audio Mute: false
> [45978.068801] cx18-0: Video Encoding: MPEG-2
> [45978.068803] cx18-0: Video Aspect: 4x3
> [45978.068806] cx18-0: Video B Frames: 2
> [45978.068809] cx18-0: Video GOP Size: 15
> [45978.068811] cx18-0: Video GOP Closure: true
> [45978.068814] cx18-0: Video Bitrate Mode: Variable Bitrate
> [45978.068817] cx18-0: Video Bitrate: 6000000
> [45978.068819] cx18-0: Video Peak Bitrate: 8000000
> [45978.068822] cx18-0: Video Temporal Decimation: 0
> [45978.068825] cx18-0: Video Mute: false
> [45978.068828] cx18-0: Video Mute YUV: 32896
> [45978.068830] cx18-0: Spatial Filter Mode: Manual
> [45978.068833] cx18-0: Spatial Filter: 0
> [45978.068836] cx18-0: Spatial Luma Filter Type: 1D Horizontal
> [45978.068839] cx18-0: Spatial Chroma Filter Type: 1D Horizontal
> [45978.068841] cx18-0: Temporal Filter Mode: Manual
> [45978.068844] cx18-0: Temporal Filter: 8
> [45978.068847] cx18-0: Median Filter Type: Off
> [45978.068849] cx18-0: Median Luma Filter Minimum: 0 (inactive)
> [45978.068852] cx18-0: Median Luma Filter Maximum: 255 (inactive)
> [45978.068855] cx18-0: Median Chroma Filter Minimum: 0 (inactive)
> [45978.068858] cx18-0: Median Chroma Filter Maximum: 255 (inactive)
> [45978.068861] cx18-0: Insert Navigation Packets: false
> [45978.068864] cx18-0: Status flags: 0x00200001
> [45978.068867] cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 KiB
> (64 buffers) in use
> [45978.068871] cx18-0: Stream encoder YUV: status 0x0000, 0% of 2025 KiB
> (20 buffers) in use
> [45978.068874] cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 KiB
> (20 buffers) in use
> [45978.068877] cx18-0: Stream encoder PCM audio: status 0x0000, 0% of 1024
> KiB (256 buffers) in use
> [45978.068880] cx18-0: Read MPEG/VBI: 3893248/0 bytes
I see you've been reading data from the MPEG device node. Are you
getting a black screen, a grey screen, or (I hope not) a red screen?
Regards,
Andy
> [45978.068882] cx18-0: ================== END STATUS CARD #0
> ==================
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
