On Mon, Jun 6, 2011 at 6:50 AM, Eric Morgan <[email protected]> wrote:
> Actually at the moment I have a green screen on one an a red screen on the > other... > On Jun 5, 2011 9:10 AM, "Eric Morgan" <[email protected]> wrote: > > On Sun, Jun 5, 2011 at 5:37 AM, Andy Walls <[email protected]> > wrote: > > > >> Hi Eric, > >> > >> (adding the list back to the Cc:) > >> > >> On Sat, 2011-06-04 at 10:12 -0700, Eric Morgan wrote: > >> > >> > >> > Hi Andy, Thanks so much for the help. > >> > >> You're welcome. > >> > >> > > >> > Here's the log: > >> > server:~$ v4l2-ctl -d /dev/video0 --log-status > >> > >> This doesn't include all the messages that you get upon module load, but > >> honestly things appear to be OK from that perspective. I have some > >> comments/questions on the log below: > >> > >> > Status Log: > >> > > >> > [45978.023303] cx18-0: ================= START STATUS CARD #0 > >> ================= > >> > [45978.023308] cx18-0: Version: 1.5.0 Card: Hauppauge HVR-1600 > >> > [45978.065888] tveeprom 14-0050: Hauppauge model 74301, rev F1F5, > >> serial# [redacted] > >> > [45978.065892] tveeprom 14-0050: MAC address is [redacted] > >> > [45978.065895] tveeprom 14-0050: tuner model is NXP 18271C2 (idx 155, > >> type 54) > >> > [45978.065899] tveeprom 14-0050: TV standards PAL(B/G) NTSC(M) PAL(I) > >> SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) > >> > [45978.065902] tveeprom 14-0050: audio processor is CX23418 (idx 38) > >> > [45978.065905] tveeprom 14-0050: decoder processor is CX23418 (idx 31) > >> > [45978.065908] tveeprom 14-0050: has no radio, has IR receiver, has IR > >> transmitter > >> ^^ > >> There are at least 15 I2C busses in your system. That's alot. I am > >> going to assume there are a lot of various PCI/PCIe cards and/or USB > >> peripherials installed in this machine. > >> > >> > >> > >> > [45978.065915] cx18-0 843: Video signal: not present > >> > >> The meaning of this is very clear. The CX25843 core inside the CX23418 > >> cannot get enough valid horizontal and vertical video sync pulses from > >> the analog video signal at the input of the CX23418 chip. > >> > >> This can happen for a number of reasons, but first.... > >> > >> > [45978.065917] cx18-0 843: Detected format: NTSC-M > >> > [45978.065919] cx18-0 843: Specified standard: NTSC-M > >> > [45978.065921] cx18-0 843: Specified video input: S-Video (Luma > >> In1, Chroma In5) > >> > >> Do you have a known good S-Video source hooked up with an active signal > >> and a known good cable? > >> > >> > [45978.065924] cx18-0 843: Specified audioclock freq: 48000 Hz > >> > [45978.065934] cx18-0 843: Detected audio mode: mono > >> > [45978.065936] cx18-0 843: Detected audio standard: no detected > >> audio standard > >> > [45978.065938] cx18-0 843: Audio muted: no > >> > [45978.065940] cx18-0 843: Audio microcontroller: stopped > >> > [45978.065942] cx18-0 843: Configured audio standard: automatic > >> detection > >> > [45978.065944] cx18-0 843: Configured audio system: BTSC > >> > [45978.065946] cx18-0 843: Specified audio input: External > >> > [45978.065948] cx18-0 843: Preferred audio mode: stereo > >> > [45978.066488] cx18-0 gpio-reset-ctrl: GPIO: direction 0x00003801, > >> value 0x00003801 > >> > [45978.068758] cs5345 14-004c: Input: 2 > >> > [45978.068760] cs5345 14-004c: Volume: 0 dB > >> > [45978.068763] cx18-0: Video Input: S-Video 1 > >> > [45978.068765] cx18-0: Audio Input: Line In 1 > >> > [45978.068768] cx18-0: GPIO: direction 0x00003801, value 0x00003801 > >> > [45978.068770] cx18-0: Tuner: TV > >> > [45978.068773] cx18-0: Stream Type: MPEG-2 Program Stream > >> > [45978.068776] cx18-0: Stream VBI Format: No VBI > >> > [45978.068779] cx18-0: Audio Sampling Frequency: 48 kHz > >> > [45978.068782] cx18-0: Audio Encoding: MPEG-1/2 Layer II > >> > [45978.068785] cx18-0: Audio Layer II Bitrate: 224 kbps > >> > [45978.068787] cx18-0: Audio Stereo Mode: Stereo > >> > [45978.068790] cx18-0: Audio Stereo Mode Extension: Bound 4 (inactive) > >> > [45978.068793] cx18-0: Audio Emphasis: No Emphasis > >> > [45978.068796] cx18-0: Audio CRC: No CRC > >> > [45978.068798] cx18-0: Audio Mute: false > >> > [45978.068801] cx18-0: Video Encoding: MPEG-2 > >> > [45978.068803] cx18-0: Video Aspect: 4x3 > >> > [45978.068806] cx18-0: Video B Frames: 2 > >> > [45978.068809] cx18-0: Video GOP Size: 15 > >> > [45978.068811] cx18-0: Video GOP Closure: true > >> > [45978.068814] cx18-0: Video Bitrate Mode: Variable Bitrate > >> > [45978.068817] cx18-0: Video Bitrate: 6000000 > >> > [45978.068819] cx18-0: Video Peak Bitrate: 8000000 > >> > [45978.068822] cx18-0: Video Temporal Decimation: 0 > >> > [45978.068825] cx18-0: Video Mute: false > >> > [45978.068828] cx18-0: Video Mute YUV: 32896 > >> > [45978.068830] cx18-0: Spatial Filter Mode: Manual > >> > [45978.068833] cx18-0: Spatial Filter: 0 > >> > [45978.068836] cx18-0: Spatial Luma Filter Type: 1D Horizontal > >> > [45978.068839] cx18-0: Spatial Chroma Filter Type: 1D Horizontal > >> > [45978.068841] cx18-0: Temporal Filter Mode: Manual > >> > [45978.068844] cx18-0: Temporal Filter: 8 > >> > [45978.068847] cx18-0: Median Filter Type: Off > >> > [45978.068849] cx18-0: Median Luma Filter Minimum: 0 (inactive) > >> > [45978.068852] cx18-0: Median Luma Filter Maximum: 255 (inactive) > >> > [45978.068855] cx18-0: Median Chroma Filter Minimum: 0 (inactive) > >> > [45978.068858] cx18-0: Median Chroma Filter Maximum: 255 (inactive) > >> > [45978.068861] cx18-0: Insert Navigation Packets: false > >> > [45978.068864] cx18-0: Status flags: 0x00200001 > >> > [45978.068867] cx18-0: Stream encoder MPEG: status 0x0000, 0% of 2048 > >> KiB (64 buffers) in use > >> > [45978.068871] cx18-0: Stream encoder YUV: status 0x0000, 0% of 2025 > >> KiB (20 buffers) in use > >> > [45978.068874] cx18-0: Stream encoder VBI: status 0x0000, 0% of 1015 > >> KiB (20 buffers) in use > >> > [45978.068877] cx18-0: Stream encoder PCM audio: status 0x0000, 0% of > >> 1024 KiB (256 buffers) in use > >> > [45978.068880] cx18-0: Read MPEG/VBI: 3893248/0 bytes > >> > >> I see you've been reading data from the MPEG device node. Are you > >> getting a black screen, a grey screen, or (I hope not) a red screen? > >> > >> Regards, > >> Andy > >> > >> > [45978.068882] cx18-0: ================== END STATUS CARD #0 > >> ================== > >> > > >> > >> > >> Thanks again... > > > > There are at least 15 I2C busses in your system. That's alot. I am > >> going to assume there are a lot of various PCI/PCIe cards and/or USB > >> peripherials installed in this machine. > >> > > > > I have the two hvr-1600's and that's it. > > > > Do you have a known good S-Video source hooked up with an active signal > >> and a known good cable? > >> > > > > I'm relatively sure the source is good. It was all hooked up to a the > same > > system with a pair of PVR-150's which I assume were going bad (unstable > > signal, wavy picture). On this setup, one card's tuner was connected to > the > > cable out of a cable box, and the other directly to cable. I wasn't using > > the box's s-video out. I've hooked both cables directly to a TV and the > > signal looks good there. I have not tested the s-video out of the cable > box > > but assume it's ok. I'll see if I can find something to hook it to. > > > > There is a bit of splitting going on before the cards see the cable. > Perhaps > > these cards need a bigger signal? Maybe the wavy pictures of the > PVR-150's > > was a drop in signal and not the tuners going bad? > > > > I see you've been reading data from the MPEG device node. Are you > >> getting a black screen, a grey screen, or (I hope not) a red screen? > >> > > > > > > Interestingly, one card shows a black screen (video1) and the other shows > > the red screen (video0). > > > > Eric > Ok I've hunted through just about every log I can find. It appears that everything is loading find and I don't see any errors. I left the cards in the mythbox and the schedule is running normally from when I had the PVR150's installed. One card is recording all red and the other is all green. What else can I look at/try? Thanks!
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
