tryed the Levente's solution .... added non-free repositories to sources.list vi /etc/apt/sources.list
added lines: #non free deb http://ftp.it.debian.org/debian/ squeeze non-free deb-src http://ftp.it.debian.org/debian/ squeeze non-free refreshed the cache with: apt-get update and installed firmware with: apt-get install firmware-ivtv now pvr350player goes without errors (i suppose ... do not have TV linked to the board now ;-) ) Thnx PS: now i try to figure out doubled compressed files in ivtv site for curiosity :D On Thu, Jun 30, 2011 at 12:00 PM, <[email protected]> wrote: > Send ivtv-users mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://ivtvdriver.org/mailman/listinfo/ivtv-users > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ivtv-users digest..." > > > Today's Topics: > > 1. all firmware archives are corrupted? (Federico Allegretti) > 2. Re: all firmware archives are corrupted? (Nov?k Levente) > 3. Re: all firmware archives are corrupted? (Andy Walls) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 29 Jun 2011 13:15:47 +0200 > From: Federico Allegretti <[email protected]> > To: [email protected] > Subject: [ivtv-users] all firmware archives are corrupted? > Message-ID: <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > Hello. > > I'm trying to install ivtv drivers on an old AMD Duron 650 machine to drive > a pvr350 like a video playback server. > > Installed in a mirror hd enviroment a debian 6.02 and everything seems ok. > > "lspci" reports: > 00:08.0 Multimedia video controller: Internext Compression Inc iTVC15 > MPEG-2 > Encoder (rev 01) > > "dmesg | grep ivtv" reports: > [ 9.434856] ivtv: Start initialization, version 1.4.1 > [ 9.435234] ivtv0: Initializing card 0 > [ 9.435250] ivtv0: Autodetected Hauppauge card (cx23415 based) > [ 9.436766] ivtv 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, > low) -> IRQ 10 > [ 9.436790] ivtv0: Unreasonably low latency timer, setting to 64 (was > 32) > [ 9.494359] ivtv0: Autodetected Hauppauge WinTV PVR-350 > [ 9.630465] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv > i2c driver #0) > [ 9.791591] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0) > [ 9.872948] msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver > #0) > [ 9.989589] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > [ 10.008795] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > [ 10.067504] IRQ 10/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs > [ 10.069283] ivtv0: Registered device video0 for encoder MPG (4096 kB) > [ 10.069666] ivtv0: Registered device video32 for encoder YUV (2048 kB) > [ 10.069992] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > [ 10.070340] ivtv0: Registered device video24 for encoder PCM (320 kB) > [ 10.070662] ivtv0: Registered device radio0 for encoder radio > [ 10.070970] ivtv0: Registered device video16 for decoder MPG (1024 kB) > [ 10.071284] ivtv0: Registered device vbi8 for decoder VBI (64 kB) > [ 10.071638] ivtv0: Registered device vbi16 for decoder VOUT > [ 10.071963] ivtv0: Registered device video48 for decoder YUV (1024 kB) > [ 10.071976] ivtv0: Initialized card: Hauppauge WinTV PVR-350 > [ 10.074597] ivtv: End initialization > [ 10.740092] ivtv 0000:00:08.0: firmware: requesting v4l-cx2341x-enc.fw > [ 10.782961] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be > 376836 bytes) > [ 10.783033] ivtv0: Did you put the firmware in the hotplug firmware > directory? > [ 10.783094] ivtv0: Retry loading firmware > [ 11.404091] ivtv 0000:00:08.0: firmware: requesting v4l-cx2341x-enc.fw > [ 11.412921] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must be > 376836 bytes) > [ 11.412996] ivtv0: Did you put the firmware in the hotplug firmware > directory? > [ 11.413060] ivtv0: Failed to initialize on minor 2 > [ 11.413768] ivtv0: Failed to initialize on minor 0 > [ 11.415383] ivtv0: Failed to initialize on minor 4 > [ 11.416696] ivtv0: Failed to initialize on minor 5 > [ 11.417907] ivtv0: Failed to initialize on minor 6 > [ 11.419120] ivtv0: Failed to initialize on minor 7 > [ 11.420495] ivtv0: Failed to initialize on minor 1 > [ 11.421717] ivtv0: Failed to initialize on minor 3 > [ 11.422929] ivtv0: Failed to initialize on minor 8 > > Now i suppose i need to download firmware files and put them in the correct > folder, BUT i cannot found correct firmware AND cannot find an "HOTPLUG" > directory :( > > Tryied to get firmware from there: > http://dl.ivtvdriver.org/ivtv/firmware/ivtv-firmware.tar.gz > BUT "tar xvf ivtv-firmware.tar.gz" reports an invalid tar file (italian > language distro): > tar: Questo non sembra un archivio tar > tar: Passaggio alla prossima intestazione > tar: Uscita con stato di fallimento in base agli errori precedenti > > ALL other firwares in the http://dl.ivtvdriver.org/ivtv/firmware/ folder > seems to be corrupted (except cx18...) and also "tar xvf > xf86-video-ivtv-1.1.2.tar.gz" (downloaded from > http://dl.ivtvdriver.org/xf86-video-ivtv/ ) fire's the tar error for NOT a > tar file. > > "tar xvf ivtv-1.2.0.tar.gz" on archive downloaded from > http://dl.ivtvdriver.org/ivtv/stable/ > goes well, but "make" gives: > make[2]: Entering directory `/lib/modules/2.6.32-5-686/build' > make[2]: *** No rule to make target `modules'. Stop. > make[2]: Leaving directory `/lib/modules/2.6.32-5-686/build' > make[1]: *** [all] Error 2 > make[1]: Leaving directory `/home/playback/ivtv-1.2.0/i2c-drivers' > make: *** [all] Error 2 > > now i really don't know what to do :( > > Help please :D any hint will be welcomed > > Federico > > -- > Messagenet VOIP: 5338759 > > My blogs: http://altri-media.blogspot.com/ > http://subbaqquerie.blogspot.com/ > > YouTube Channel: AllegFede > > VIMEO HD videos: http://www.vimeo.com/user1912745/videos > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://ivtvdriver.org/pipermail/ivtv-users/attachments/20110629/6b122ccd/attachment-0001.html > > > > ------------------------------ > > Message: 2 > Date: Wed, 29 Jun 2011 13:52:54 +0200 > From: Nov?k Levente <[email protected]> > To: [email protected] > Subject: Re: [ivtv-users] all firmware archives are corrupted? > Message-ID: <[email protected]> > Content-Type: text/plain; charset="UTF-8" > > 2011. 06. 29, szerda keltez?ssel 13.15-kor Federico Allegretti ezt ?rta: > > Hello. > > > > I'm trying to install ivtv drivers on an old AMD Duron 650 machine to > > drive a pvr350 like a video playback server. > > > > Installed in a mirror hd enviroment a debian 6.02 and everything seems > > ok. > > > > "lspci" reports: > > 00:08.0 Multimedia video controller: Internext Compression Inc iTVC15 > > MPEG-2 Encoder (rev 01) > > > > "dmesg | grep ivtv" reports: > > [ 9.434856] ivtv: Start initialization, version 1.4.1 > > [ 9.435234] ivtv0: Initializing card 0 > > [ 9.435250] ivtv0: Autodetected Hauppauge card (cx23415 based) > > [ 9.436766] ivtv 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 10 > > (level, low) -> IRQ 10 > > [ 9.436790] ivtv0: Unreasonably low latency timer, setting to 64 > > (was 32) > > [ 9.494359] ivtv0: Autodetected Hauppauge WinTV PVR-350 > > [ 9.630465] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 > > (ivtv i2c driver #0) > > [ 9.791591] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver > > #0) > > [ 9.872948] msp3400 1-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c > > driver #0) > > [ 9.989589] tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) > > [ 10.008795] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) > > [ 10.067504] IRQ 10/ivtv0: IRQF_DISABLED is not guaranteed on shared > > IRQs > > [ 10.069283] ivtv0: Registered device video0 for encoder MPG (4096 > > kB) > > [ 10.069666] ivtv0: Registered device video32 for encoder YUV (2048 > > kB) > > [ 10.069992] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > > [ 10.070340] ivtv0: Registered device video24 for encoder PCM (320 > > kB) > > [ 10.070662] ivtv0: Registered device radio0 for encoder radio > > [ 10.070970] ivtv0: Registered device video16 for decoder MPG (1024 > > kB) > > [ 10.071284] ivtv0: Registered device vbi8 for decoder VBI (64 kB) > > [ 10.071638] ivtv0: Registered device vbi16 for decoder VOUT > > [ 10.071963] ivtv0: Registered device video48 for decoder YUV (1024 > > kB) > > [ 10.071976] ivtv0: Initialized card: Hauppauge WinTV PVR-350 > > [ 10.074597] ivtv: End initialization > > [ 10.740092] ivtv 0000:00:08.0: firmware: requesting > > v4l-cx2341x-enc.fw > > [ 10.782961] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must > > be 376836 bytes) > > [ 10.783033] ivtv0: Did you put the firmware in the hotplug firmware > > directory? > > [ 10.783094] ivtv0: Retry loading firmware > > [ 11.404091] ivtv 0000:00:08.0: firmware: requesting > > v4l-cx2341x-enc.fw > > [ 11.412921] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must > > be 376836 bytes) > > [ 11.412996] ivtv0: Did you put the firmware in the hotplug firmware > > directory? > > [ 11.413060] ivtv0: Failed to initialize on minor 2 > > [ 11.413768] ivtv0: Failed to initialize on minor 0 > > [ 11.415383] ivtv0: Failed to initialize on minor 4 > > [ 11.416696] ivtv0: Failed to initialize on minor 5 > > [ 11.417907] ivtv0: Failed to initialize on minor 6 > > [ 11.419120] ivtv0: Failed to initialize on minor 7 > > [ 11.420495] ivtv0: Failed to initialize on minor 1 > > [ 11.421717] ivtv0: Failed to initialize on minor 3 > > [ 11.422929] ivtv0: Failed to initialize on minor 8 > > > > Now i suppose i need to download firmware files and put them in the > > correct folder, BUT i cannot found correct firmware AND cannot find an > > "HOTPLUG" directory :( > > > > Tryied to get firmware from there: > > http://dl.ivtvdriver.org/ivtv/firmware/ivtv-firmware.tar.gz > > BUT "tar xvf ivtv-firmware.tar.gz" reports an invalid tar file > > (italian language distro): > > tar: Questo non sembra un archivio tar > > tar: Passaggio alla prossima intestazione > > tar: Uscita con stato di fallimento in base agli errori precedenti > > > > ALL other firwares in the http://dl.ivtvdriver.org/ivtv/firmware/ > > folder seems to be corrupted (except cx18...) and also "tar xvf > > xf86-video-ivtv-1.1.2.tar.gz" (downloaded from > > http://dl.ivtvdriver.org/xf86-video-ivtv/ ) fire's the tar error for > > NOT a tar file. > > > > "tar xvf ivtv-1.2.0.tar.gz" on archive downloaded from > > http://dl.ivtvdriver.org/ivtv/stable/ > > goes well, but "make" gives: > > make[2]: Entering directory `/lib/modules/2.6.32-5-686/build' > > make[2]: *** No rule to make target `modules'. Stop. > > make[2]: Leaving directory `/lib/modules/2.6.32-5-686/build' > > make[1]: *** [all] Error 2 > > make[1]: Leaving directory `/home/playback/ivtv-1.2.0/i2c-drivers' > > make: *** [all] Error 2 > > > > now i really don't know what to do :( > > > > Help please :D any hint will be welcomed > > > > Federico > > Please install "firmware-ivtv" from the non-free section of Debian, it > will take care of everything needed to load the firmware. You do not > need to compile itv-1.2.0.tar.gz. And as you've got a PVR-350, the > "xserver-xorg-video-ivtv" is maybe also of interest for you. > > Levente > > > > > > ------------------------------ > > Message: 3 > Date: Wed, 29 Jun 2011 19:50:39 -0400 > From: Andy Walls <[email protected]> > To: User discussion about IVTV <[email protected]> > Subject: Re: [ivtv-users] all firmware archives are corrupted? > Message-ID: <[email protected]> > Content-Type: text/plain; charset="UTF-8" > > On Wed, 2011-06-29 at 13:15 +0200, Federico Allegretti wrote: > > Hello. > > > > I'm trying to install ivtv drivers on an old AMD Duron 650 machine to > > drive a pvr350 like a video playback server. > > > > Installed in a mirror hd enviroment a debian 6.02 and everything seems > > ok. > > > > > Now i suppose i need to download firmware files and put them in the > > correct folder, BUT i cannot found correct firmware AND cannot find an > > "HOTPLUG" directory :( > > It is usually /lib/firmware on Fedora and RedHat. > > > > Tryied to get firmware from there: > > http://dl.ivtvdriver.org/ivtv/firmware/ivtv-firmware.tar.gz > > BUT "tar xvf ivtv-firmware.tar.gz" reports an invalid tar file > > (italian language distro): > > tar: Questo non sembra un archivio tar > > tar: Passaggio alla prossima intestazione > > tar: Uscita con stato di fallimento in base agli errori precedenti > > The ftp server gzip's the already gzipped files that I uploaded. I > haven't bothered to figure out how to fix that yet. > > To get around the problem, do something like this: > > $ gunzip -v ivtv-firmware.tar.gz > $ mv ivtv-firmware.tar ivtv-firmware.tar.gz > $ tar -xzvf ivtv-firmware.tar.gz > > > Regards, > Andy > > > > > > > ------------------------------ > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > > End of ivtv-users Digest, Vol 70, Issue 12 > ****************************************** > -- Messagenet VOIP: 5338759 My blogs: http://altri-media.blogspot.com/ http://subbaqquerie.blogspot.com/ YouTube Channel: AllegFede VIMEO HD videos: http://www.vimeo.com/user1912745/videos
_______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
