On Sat, 2012-02-11 at 11:02 -0700, Gmail wrote:
> Hi All,
>
>
> I am hoping someone can help me with some trouble shooting that I am
> doing. I have a box with three Hauppauge cards installed (PVR-500,
> HVR-2250, and the latest is a HVR 1600). Though I have the 2250
> installed I have not built my antenna as of yet to bring it online.
> My PVR-500 used to work with both tuners but then a couple years ago
> the second unit just stopped working (no idea why and assumed over
> time, after lots of attempts to try and revive, that it was just
> dead). I happened across the HVR-1600 yesterday and thought it would
> make a good addition for the second Analog tuner that I lost. The
> problem is that it is providing the same static feed as the second
> tuner from the PVR-500. After looking at the logs I am starting to
> wonder if the problemI have is a firmware bug or something else and
> could use some help. The reason I am turning to this list is because
> of a line in the syslog in what appears to be the ivtv sequence.
>
>
> Note: The Analog tuners are being used to capture video through the
> s-video cable from my satellite tuners and the digital ones are for
> future OTA HD.
Please install v4l2-ctl (probably in a v4l2-utils package) and mplayer.
Kill the mythbackend, if it is running.
Then run v4l2-ctl --list-devices, to see what card corresponds to which
devices nodes. For example:
$ v4l2-ctl --list-devices
Hauppauge HVR-1600 (PCI:0000:03:00.0):
/dev/video0
/dev/video24
/dev/video32
/dev/vbi0
Hauppauge WinTV PVR-150 (PCI:0000:03:01.0):
/dev/video2
/dev/video26
/dev/video34
/dev/radio2
/dev/vbi2
Hauppauge HVR-1600 (PCI:0000:03:02.0):
/dev/video1
/dev/video25
/dev/video33
/dev/radio1
/dev/vbi1
On a device from which you wish to capture S-Video, set the proper input
and analog TV standard using v4l2-ctl:
$ v4l2-ctl -d /dev/video0 --list-inputs
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Tuner 1
Type : 0x00000001
Audioset : 0x00000007
Tuner : 0x00000000
Standard : 0x0000000000001000 (NTSC-M)
Status : 0x00000000 (ok)
Capabilities: 0x00000004 (SD presets)
Input : 1
Name : S-Video 1
Type : 0x00000002
Audioset : 0x00000007
Tuner : 0x00000000
Standard : 0x0000000000FFFFFF
(PAL-B/B1/G/H/I/D/D1/K/M/N/Nc/60 NTSC-M/M-JP/443/M-KR SECAM-B/D/G/H/K/K1/L/Lc)
Status : 0x00000000 (ok)
Capabilities: 0x00000004 (SD presets)
Input : 2
Name : Composite 1
Type : 0x00000002
Audioset : 0x00000007
Tuner : 0x00000000
Standard : 0x0000000000FFFFFF
(PAL-B/B1/G/H/I/D/D1/K/M/N/Nc/60 NTSC-M/M-JP/443/M-KR SECAM-B/D/G/H/K/K1/L/Lc)
Status : 0x00000000 (ok)
Capabilities: 0x00000004 (SD presets)
[...]
$ v4l2-ctl -d /dev/video0 --set-input=1
Video input set to 1 (S-Video 1: ok)
$ v4l2-ctl -d /dev/video0 --list-standards
ioctl: VIDIOC_ENUMSTD
Index : 0
ID : 0x000000000000B000
Name : NTSC
Frame period: 1001/30000
Frame lines : 525
Index : 1
ID : 0x0000000000001000
Name : NTSC-M
Frame period: 1001/30000
Frame lines : 525
[...]
$ v4l2-ctl -d /dev/video0 --set-standard=1
Standard set to 00001000
Turn on your S-Video source, and then just capture an MPEG live with mplayer:
$ mplayer /dev/video0 -cache 8192
or capture a file for later playback
$ cat /dev/video0 > foo.mpg
^C
$ mplayer foo.mpg
> Here is what I see on the two problematic analog tuners.
Looks like an untuned tuner input driving the encoder, not S-Video. An
S-Video input that is connected but has no signal is usually a solid
grey or black screen.
>
> Here is some background information:
> and:
>
>
> cat /var/log/syslog|grep cx18
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.465299] cx18: Start
> initialization, version 1.5.0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516868] cx18-0: Initializing
> card 0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516871] cx18-0: Autodetected
> Hauppauge card
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517062] cx18 0000:01:06.0: PCI
> INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.523272] cx18-0: cx23418
> revision 01010000 (B)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740991] cx18-0: Autodetected
> Hauppauge HVR-1600
greping for 'cx18' will miss any error messages reltaed to the tuner
chips and initialization. Anyway, the HVR-1600 lloks OK from what you
provided.
>
> and what set my into this e-mail:
>
>
>
>
>
>
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.371758] Linux video capture
> interface: v2.00
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.382727] shpchp: Standard Hot
> Plug PCI Controller Driver version: 0.4
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.449074] ivtv: Start
> initialization, version 1.4.2
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.453711] parport_pc 00:05:
> reported by Plug and Play ACPI
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.453762] parport0: PC-style at
> 0x378, irq 7 [PCSPP,TRISTATE]
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.456724] [Firmware Bug]:
> ACPI(IGPU) defines _DOD but not _DOS
Your computer's BIOS has an ACPI bug that is unrelated to the video
capture cards, AFAICT.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.457016] input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input5
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.457108] ACPI: Video Device
> [IGPU] (multi-head: yes rom: no post: no)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.458546] ivtv0: Initializing
> card 0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.458552] ivtv0: Autodetected
> Hauppauge card (cx23416 based)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.461226] ACPI: PCI Interrupt
> Link [LNKB] enabled at IRQ 17
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.461251] ivtv 0000:02:08.0: PCI
> INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.465299] cx18: Start
> initialization, version 1.5.0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516569] tveeprom 2-0050:
> Hauppauge model 23552, rev E792, serial# 10603908
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516572] tveeprom 2-0050: tuner
> model is Philips FQ1236A MK4 (idx 92, type 57)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516575] tveeprom 2-0050: TV
> standards NTSC(M) (eeprom 0x08)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516577] tveeprom 2-0050: second
> tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516580] tveeprom 2-0050: audio
> processor is CX25843 (idx 37)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516582] tveeprom 2-0050:
> decoder processor is CX25843 (idx 30)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516584] tveeprom 2-0050: has
> radio
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516586] ivtv0: Autodetected
> WinTV PVR 500 (unit #1)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516630] HDA Intel 0000:00:07.0:
> power state changed by ACPI to D0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516635] HDA Intel 0000:00:07.0:
> power state changed by ACPI to D0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516789] ACPI: PCI Interrupt
> Link [LAZA] enabled at IRQ 21
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516793] HDA Intel 0000:00:07.0:
> PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516795] hda_intel: Disabling MSI
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516818] HDA Intel 0000:00:07.0:
> setting latency timer to 64
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516868] cx18-0: Initializing
> card 0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516871] cx18-0: Autodetected
> Hauppauge card
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517047] ACPI: PCI Interrupt
> Link [LNKA] enabled at IRQ 16
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517062] cx18 0000:01:06.0: PCI
> INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.523272] cx18-0: cx23418
> revision 01010000 (B)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.527518] cx25840 2-0044:
> cx25843-24 found @ 0x88 (ivtv i2c driver #0)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.552242] lp0: using parport0
> (interrupt-driven).
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.559592] i2c-core: driver
> [tuner] using legacy suspend method
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.559595] i2c-core: driver
> [tuner] using legacy resume method
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.571404] tea5767 2-0060: type
> set to Philips TEA5767HN FM Radio
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.572716] tuner 2-0060: Tuner 62
> found with type(s) Radio.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.647194] tda9887 2-0043:
> creating new instance
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.647198] tda9887 2-0043:
> tda988[5/6/7] found
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.648262] tuner 2-0043: Tuner 74
> found with type(s) Radio TV.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.649550] EXT4-fs (sdc1):
> re-mounted. Opts: errors=remount-ro
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.661166] tuner 2-0061: Tuner -1
> found with type(s) TV.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.661266] MCE: In-kernel MCE
> decoding enabled.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.662420] EDAC MC: Ver: 2.1.0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.667708] AMD64 EDAC driver v3.4.0
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.669263] wm8775 2-001b: chip
> found @ 0x36 (ivtv i2c driver #0)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.679969] type=1400
> audit(1328977336.392:2): apparmor="STATUS" operation="profile_load"
> name="/sbin/dhclient" pid=765 comm="apparmor_parser"
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.680434] type=1400
> audit(1328977336.396:3): apparmor="STATUS" operation="profile_load"
> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=765
> comm="apparmor_parser"
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.680697] type=1400
> audit(1328977336.396:4): apparmor="STATUS" operation="profile_load"
> name="/usr/lib/connman/scripts/dhclient-script" pid=765 comm="apparmor_parser"
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.683264] type=1400
> audit(1328977336.396:5): apparmor="STATUS" operation="profile_load"
> name="/usr/sbin/ntpd" pid=786 comm="apparmor_parser"
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.691569] saa7164 driver loaded
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695133] saa7164 0000:05:00.0:
> PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695958] CORE saa7164[0]:
> subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695962] saa7164[0]/0: found at
> 0000:05:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfe800000
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695968] saa7164 0000:05:00.0:
> setting latency timer to 64
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.698088] tuner-simple 2-0061:
> creating new instance
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.698093] tuner-simple 2-0061:
> type set to 57 (Philips FQ1236A MK4)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699764] ivtv0: Registered
> device video0 for encoder MPG (4096 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699792] ivtv0: Registered
> device video32 for encoder YUV (2048 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699818] ivtv0: Registered
> device vbi0 for encoder VBI (1024 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699841] ivtv0: Registered
> device video24 for encoder PCM (320 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699866] ivtv0: Registered
> device radio0 for encoder radio
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699868] ivtv0: Initialized
> card: WinTV PVR 500 (unit #1)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740974] tveeprom 3-0050:
> Hauppauge model 74041, rev C6G8, serial# 7255283
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740977] tveeprom 3-0050: MAC
> address is 00:0d:fe:6e:b4:f3
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740979] tveeprom 3-0050: tuner
> model is TCL M30WTP-4N-E (idx 168, type 85)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740982] tveeprom 3-0050: TV
> standards NTSC(M) (eeprom 0x08)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740984] tveeprom 3-0050: audio
> processor is CX23418 (idx 38)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740986] tveeprom 3-0050:
> decoder processor is CX23418 (idx 31)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740988] tveeprom 3-0050: has no
> radio, has IR receiver, has IR transmitter
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740991] cx18-0: Autodetected
> Hauppauge HVR-1600
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740993] cx18-0: Simultaneous
> Digital and Analog TV capture supported
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.748153] ivtv1: Initializing
> card 1
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.748158] ivtv1: Autodetected
> Hauppauge card (cx23416 based)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.749970] ACPI: PCI Interrupt
> Link [LNKC] enabled at IRQ 19
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.749978] ivtv 0000:02:09.0: PCI
> INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805055] tveeprom 5-0050:
> Hauppauge model 23552, rev E792, serial# 10603908
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805058] tveeprom 5-0050: tuner
> model is Philips FQ1236A MK4 (idx 92, type 57)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805060] tveeprom 5-0050: TV
> standards NTSC(M) (eeprom 0x08)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805063] tveeprom 5-0050: second
> tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805065] tveeprom 5-0050: audio
> processor is CX25843 (idx 37)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805067] tveeprom 5-0050:
> decoder processor is CX25843 (idx 30)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805069] tveeprom 5-0050: has
> radio
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805071] ivtv1: Correcting
> tveeprom data: no radio present on second unit
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805073] ivtv1: Autodetected
> WinTV PVR 500 (unit #2)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.811719] cx25840 5-0044:
> cx25843-24 found @ 0x88 (ivtv i2c driver #1)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.833014] tda9887 5-0043:
> creating new instance
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.833017] tda9887 5-0043:
> tda988[5/6/7] found
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.834052] tuner 5-0043: Tuner 74
> found with type(s) Radio TV.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.839893] tuner 5-0061: Tuner -1
> found with type(s) Radio TV.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.845534] wm8775 5-001b: chip
> found @ 0x36 (ivtv i2c driver #1)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.863936] tuner-simple 5-0061:
> creating new instance
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.863940] tuner-simple 5-0061:
> type set to 57 (Philips FQ1236A MK4)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865665] ivtv1: Registered
> device video1 for encoder MPG (4096 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865692] ivtv1: Registered
> device video33 for encoder YUV (2048 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865717] ivtv1: Registered
> device vbi1 for encoder VBI (1024 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865743] ivtv1: Registered
> device video25 for encoder PCM (320 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865745] ivtv1: Initialized
> card: WinTV PVR 500 (unit #2)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865799] ivtv: End initialization
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.913467] tda9887 4-0043:
> creating new instance
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.913470] tda9887 4-0043:
> tda988[5/6/7] found
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.914339] tuner 4-0043: Tuner 74
> found with type(s) Radio TV.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.920094] tuner 4-0061: Tuner -1
> found with type(s) Radio TV.
Every thing appears OK for ivtv and cx18.
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.944043]
> saa7164_downloadfirmware() no first image
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.944055]
> saa7164_downloadfirmware() Waiting for firmware upload
> (NXP7164-2010-03-10.1.fw)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.964660] JFS: nTxBlock = 8192,
> nTxLock = 65536
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.982069] cs5345 3-004c: chip
> found @ 0x98 (cx18 i2c driver #0-0)
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.986133] tuner-simple 4-0061:
> creating new instance
> Feb 11 09:22:21 mythtv-primary kernel: [ 12.986136] tuner-simple 4-0061:
> type set to 85 (Philips FQ1236 MK5)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.000831] cx18-0: Registered
> device video2 for encoder MPEG (64 x 32.00 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.000839] DVB: registering new
> adapter (cx18)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.001366] ppdev: user-space
> parallel port driver
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.093375]
> saa7164_downloadfirmware() Upload failed. (file not found?)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.093380] Failed to boot
> firmware, no features registered
Your HVR-2250 probably isn't going to work, given those messages about a
missing firmware file.
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.250727] EXT4-fs (sda1): mounted
> filesystem with ordered data mode. Opts: (null)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.510643] EXT4-fs (sdd1): mounted
> filesystem with ordered data mode. Opts: (null)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.673594] ivtv0: Loaded
> v4l-cx2341x-enc.fw firmware (376836 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.701587] ivtv1: Loaded
> v4l-cx2341x-enc.fw firmware (376836 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772527] k8temp 0000:00:18.3:
> Temperature readouts might be wrong - check erratum #141
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772807] EDAC amd64: DRAM ECC
> disabled.
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772813] EDAC amd64: ECC
> disabled in the BIOS or no ECC capability, module will not load.
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772814] Either enable ECC
> checking or force module loading by setting 'ecc_enable_override'.
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772815] (Note that use of the
> override may cause unknown side effects.)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.872180] ivtv0: Encoder
> revision: 0x02060039
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883339] MXL5005S: Attached at
> address 0x63
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883344] DVB: registering
> adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883461] cx18-0: DVB Frontend
> registered
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883464] cx18-0: Registered DVB
> adapter0 for TS (32 x 32.00 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883501] cx18-0: Registered
> device video34 for encoder YUV (20 x 101.25 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883540] cx18-0: Registered
> device vbi2 for encoder VBI (20 x 51984 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883567] cx18-0: Registered
> device video26 for encoder PCM audio (256 x 4.00 kB)
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883570] cx18-0: Initialized
> card: Hauppauge HVR-1600
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883631] cx18: End
> initialization
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.900395] ivtv1: Encoder
> revision: 0x02060039
> Feb 11 09:22:21 mythtv-primary kernel: [ 13.995615] cx18-alsa: module
> loading...
> Feb 11 09:22:21 mythtv-primary kernel: [ 14.162692] cx18-0: loaded
> v4l-cx23418-cpu.fw firmware (158332 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 14.413193] cx18-0: loaded
> v4l-cx23418-apu.fw firmware V00120000 (141200 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 14.472491] cx18-0: FW version:
> 0.0.74.0 (Release 2007/03/12)
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.305943] nvidia: module license
> 'NVIDIA' taints kernel.
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.305948] Disabling lock
> debugging due to kernel taint
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543106] ACPI: PCI Interrupt
> Link [SGRU] enabled at IRQ 20
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543114] nvidia 0000:03:00.0:
> PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543122] nvidia 0000:03:00.0:
> setting latency timer to 64
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543127] vgaarb: device changed
> decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.544170] NVRM: loading NVIDIA
> UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.738362] cx18-0 843: loaded
> v4l-cx23418-dig.fw firmware (16382 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 15.760120] cx18-0 843: verified
> load of v4l-cx23418-dig.fw firmware (16382 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 17.589877] cx25840 5-0044: loaded
> v4l-cx25840.fw firmware (16382 bytes)
> Feb 11 09:22:21 mythtv-primary kernel: [ 17.899715] RPC: Registered named
> UNIX socket transport module.
>
>
> Can anyone tell me if I have an actual firmware bug or if this is
> normal? Can anyone tell me how to test the card for sure to see if it
> is a defective card?
One last step is to verify that you do in fact have a video signal with
a known good devices (such as a TV). If you have RF analog or RF
digital reception problems, you may want to review this checklist as
well:
http://ivtvdriver.org/index.php/Howto:Improve_signal_quality
Regards,
Andy
>
> -Peter
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
