Thanks Andy, You are THE MAN!!!! From the v4l2-ctl command I now have the analog working on both tuners for the 500 and now on the HVR-1600!!!
I am concerned about the HVR-2250 but that will be a debug to happen when I have an antenna built. At that time I can use the HVR-1600 digital tuner to test the antenna and then engage the HVR-2250. Thanks again Andy. -Peter On 2012-02-11, at 3:02 PM, Andy Walls wrote: > On Sat, 2012-02-11 at 11:02 -0700, Gmail wrote: >> Hi All, >> >> >> I am hoping someone can help me with some trouble shooting that I am >> doing. I have a box with three Hauppauge cards installed (PVR-500, >> HVR-2250, and the latest is a HVR 1600). Though I have the 2250 >> installed I have not built my antenna as of yet to bring it online. >> My PVR-500 used to work with both tuners but then a couple years ago >> the second unit just stopped working (no idea why and assumed over >> time, after lots of attempts to try and revive, that it was just >> dead). I happened across the HVR-1600 yesterday and thought it would >> make a good addition for the second Analog tuner that I lost. The >> problem is that it is providing the same static feed as the second >> tuner from the PVR-500. After looking at the logs I am starting to >> wonder if the problemI have is a firmware bug or something else and >> could use some help. The reason I am turning to this list is because >> of a line in the syslog in what appears to be the ivtv sequence. >> >> >> Note: The Analog tuners are being used to capture video through the >> s-video cable from my satellite tuners and the digital ones are for >> future OTA HD. > > Please install v4l2-ctl (probably in a v4l2-utils package) and mplayer. > > Kill the mythbackend, if it is running. > > Then run v4l2-ctl --list-devices, to see what card corresponds to which > devices nodes. For example: > > $ v4l2-ctl --list-devices > Hauppauge HVR-1600 (PCI:0000:03:00.0): > /dev/video0 > /dev/video24 > /dev/video32 > /dev/vbi0 > > Hauppauge WinTV PVR-150 (PCI:0000:03:01.0): > /dev/video2 > /dev/video26 > /dev/video34 > /dev/radio2 > /dev/vbi2 > > Hauppauge HVR-1600 (PCI:0000:03:02.0): > /dev/video1 > /dev/video25 > /dev/video33 > /dev/radio1 > /dev/vbi1 > > On a device from which you wish to capture S-Video, set the proper input > and analog TV standard using v4l2-ctl: > > $ v4l2-ctl -d /dev/video0 --list-inputs > ioctl: VIDIOC_ENUMINPUT > Input : 0 > Name : Tuner 1 > Type : 0x00000001 > Audioset : 0x00000007 > Tuner : 0x00000000 > Standard : 0x0000000000001000 (NTSC-M) > Status : 0x00000000 (ok) > Capabilities: 0x00000004 (SD presets) > > Input : 1 > Name : S-Video 1 > Type : 0x00000002 > Audioset : 0x00000007 > Tuner : 0x00000000 > Standard : 0x0000000000FFFFFF > (PAL-B/B1/G/H/I/D/D1/K/M/N/Nc/60 NTSC-M/M-JP/443/M-KR SECAM-B/D/G/H/K/K1/L/Lc) > Status : 0x00000000 (ok) > Capabilities: 0x00000004 (SD presets) > > Input : 2 > Name : Composite 1 > Type : 0x00000002 > Audioset : 0x00000007 > Tuner : 0x00000000 > Standard : 0x0000000000FFFFFF > (PAL-B/B1/G/H/I/D/D1/K/M/N/Nc/60 NTSC-M/M-JP/443/M-KR SECAM-B/D/G/H/K/K1/L/Lc) > Status : 0x00000000 (ok) > Capabilities: 0x00000004 (SD presets) > [...] > > $ v4l2-ctl -d /dev/video0 --set-input=1 > Video input set to 1 (S-Video 1: ok) > > $ v4l2-ctl -d /dev/video0 --list-standards > ioctl: VIDIOC_ENUMSTD > Index : 0 > ID : 0x000000000000B000 > Name : NTSC > Frame period: 1001/30000 > Frame lines : 525 > > Index : 1 > ID : 0x0000000000001000 > Name : NTSC-M > Frame period: 1001/30000 > Frame lines : 525 > [...] > > $ v4l2-ctl -d /dev/video0 --set-standard=1 > Standard set to 00001000 > > > Turn on your S-Video source, and then just capture an MPEG live with mplayer: > > $ mplayer /dev/video0 -cache 8192 > > or capture a file for later playback > > $ cat /dev/video0 > foo.mpg > ^C > $ mplayer foo.mpg > > > >> Here is what I see on the two problematic analog tuners. > > Looks like an untuned tuner input driving the encoder, not S-Video. An > S-Video input that is connected but has no signal is usually a solid > grey or black screen. > >> >> Here is some background information: > >> and: >> >> >> cat /var/log/syslog|grep cx18 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.465299] cx18: Start >> initialization, version 1.5.0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516868] cx18-0: Initializing >> card 0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516871] cx18-0: Autodetected >> Hauppauge card >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517062] cx18 0000:01:06.0: PCI >> INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.523272] cx18-0: cx23418 >> revision 01010000 (B) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740991] cx18-0: Autodetected >> Hauppauge HVR-1600 > > greping for 'cx18' will miss any error messages reltaed to the tuner > chips and initialization. Anyway, the HVR-1600 lloks OK from what you > provided. > >> >> and what set my into this e-mail: >> >> >> >> >> >> >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.371758] Linux video capture >> interface: v2.00 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.382727] shpchp: Standard Hot >> Plug PCI Controller Driver version: 0.4 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.449074] ivtv: Start >> initialization, version 1.4.2 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.453711] parport_pc 00:05: >> reported by Plug and Play ACPI >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.453762] parport0: PC-style at >> 0x378, irq 7 [PCSPP,TRISTATE] >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.456724] [Firmware Bug]: >> ACPI(IGPU) defines _DOD but not _DOS > > Your computer's BIOS has an ACPI bug that is unrelated to the video > capture cards, AFAICT. > > >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.457016] input: Video Bus as >> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input5 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.457108] ACPI: Video Device >> [IGPU] (multi-head: yes rom: no post: no) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.458546] ivtv0: Initializing >> card 0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.458552] ivtv0: Autodetected >> Hauppauge card (cx23416 based) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.461226] ACPI: PCI Interrupt >> Link [LNKB] enabled at IRQ 17 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.461251] ivtv 0000:02:08.0: PCI >> INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.465299] cx18: Start >> initialization, version 1.5.0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516569] tveeprom 2-0050: >> Hauppauge model 23552, rev E792, serial# 10603908 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516572] tveeprom 2-0050: tuner >> model is Philips FQ1236A MK4 (idx 92, type 57) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516575] tveeprom 2-0050: TV >> standards NTSC(M) (eeprom 0x08) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516577] tveeprom 2-0050: >> second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516580] tveeprom 2-0050: audio >> processor is CX25843 (idx 37) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516582] tveeprom 2-0050: >> decoder processor is CX25843 (idx 30) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516584] tveeprom 2-0050: has >> radio >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516586] ivtv0: Autodetected >> WinTV PVR 500 (unit #1) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516630] HDA Intel >> 0000:00:07.0: power state changed by ACPI to D0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516635] HDA Intel >> 0000:00:07.0: power state changed by ACPI to D0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516789] ACPI: PCI Interrupt >> Link [LAZA] enabled at IRQ 21 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516793] HDA Intel >> 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516795] hda_intel: Disabling >> MSI >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516818] HDA Intel >> 0000:00:07.0: setting latency timer to 64 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516868] cx18-0: Initializing >> card 0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.516871] cx18-0: Autodetected >> Hauppauge card >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517047] ACPI: PCI Interrupt >> Link [LNKA] enabled at IRQ 16 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.517062] cx18 0000:01:06.0: PCI >> INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.523272] cx18-0: cx23418 >> revision 01010000 (B) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.527518] cx25840 2-0044: >> cx25843-24 found @ 0x88 (ivtv i2c driver #0) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.552242] lp0: using parport0 >> (interrupt-driven). >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.559592] i2c-core: driver >> [tuner] using legacy suspend method >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.559595] i2c-core: driver >> [tuner] using legacy resume method >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.571404] tea5767 2-0060: type >> set to Philips TEA5767HN FM Radio >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.572716] tuner 2-0060: Tuner 62 >> found with type(s) Radio. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.647194] tda9887 2-0043: >> creating new instance >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.647198] tda9887 2-0043: >> tda988[5/6/7] found >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.648262] tuner 2-0043: Tuner 74 >> found with type(s) Radio TV. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.649550] EXT4-fs (sdc1): >> re-mounted. Opts: errors=remount-ro >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.661166] tuner 2-0061: Tuner -1 >> found with type(s) TV. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.661266] MCE: In-kernel MCE >> decoding enabled. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.662420] EDAC MC: Ver: 2.1.0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.667708] AMD64 EDAC driver >> v3.4.0 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.669263] wm8775 2-001b: chip >> found @ 0x36 (ivtv i2c driver #0) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.679969] type=1400 >> audit(1328977336.392:2): apparmor="STATUS" operation="profile_load" >> name="/sbin/dhclient" pid=765 comm="apparmor_parser" >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.680434] type=1400 >> audit(1328977336.396:3): apparmor="STATUS" operation="profile_load" >> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=765 >> comm="apparmor_parser" >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.680697] type=1400 >> audit(1328977336.396:4): apparmor="STATUS" operation="profile_load" >> name="/usr/lib/connman/scripts/dhclient-script" pid=765 >> comm="apparmor_parser" >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.683264] type=1400 >> audit(1328977336.396:5): apparmor="STATUS" operation="profile_load" >> name="/usr/sbin/ntpd" pid=786 comm="apparmor_parser" >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.691569] saa7164 driver loaded >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695133] saa7164 0000:05:00.0: >> PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695958] CORE saa7164[0]: >> subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected] >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695962] saa7164[0]/0: found at >> 0000:05:00.0, rev: 129, irq: 18, latency: 0, mmio: 0xfe800000 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.695968] saa7164 0000:05:00.0: >> setting latency timer to 64 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.698088] tuner-simple 2-0061: >> creating new instance >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.698093] tuner-simple 2-0061: >> type set to 57 (Philips FQ1236A MK4) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699764] ivtv0: Registered >> device video0 for encoder MPG (4096 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699792] ivtv0: Registered >> device video32 for encoder YUV (2048 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699818] ivtv0: Registered >> device vbi0 for encoder VBI (1024 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699841] ivtv0: Registered >> device video24 for encoder PCM (320 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699866] ivtv0: Registered >> device radio0 for encoder radio >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.699868] ivtv0: Initialized >> card: WinTV PVR 500 (unit #1) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740974] tveeprom 3-0050: >> Hauppauge model 74041, rev C6G8, serial# 7255283 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740977] tveeprom 3-0050: MAC >> address is 00:0d:fe:6e:b4:f3 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740979] tveeprom 3-0050: tuner >> model is TCL M30WTP-4N-E (idx 168, type 85) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740982] tveeprom 3-0050: TV >> standards NTSC(M) (eeprom 0x08) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740984] tveeprom 3-0050: audio >> processor is CX23418 (idx 38) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740986] tveeprom 3-0050: >> decoder processor is CX23418 (idx 31) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740988] tveeprom 3-0050: has >> no radio, has IR receiver, has IR transmitter >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740991] cx18-0: Autodetected >> Hauppauge HVR-1600 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.740993] cx18-0: Simultaneous >> Digital and Analog TV capture supported >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.748153] ivtv1: Initializing >> card 1 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.748158] ivtv1: Autodetected >> Hauppauge card (cx23416 based) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.749970] ACPI: PCI Interrupt >> Link [LNKC] enabled at IRQ 19 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.749978] ivtv 0000:02:09.0: PCI >> INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805055] tveeprom 5-0050: >> Hauppauge model 23552, rev E792, serial# 10603908 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805058] tveeprom 5-0050: tuner >> model is Philips FQ1236A MK4 (idx 92, type 57) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805060] tveeprom 5-0050: TV >> standards NTSC(M) (eeprom 0x08) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805063] tveeprom 5-0050: >> second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805065] tveeprom 5-0050: audio >> processor is CX25843 (idx 37) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805067] tveeprom 5-0050: >> decoder processor is CX25843 (idx 30) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805069] tveeprom 5-0050: has >> radio >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805071] ivtv1: Correcting >> tveeprom data: no radio present on second unit >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.805073] ivtv1: Autodetected >> WinTV PVR 500 (unit #2) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.811719] cx25840 5-0044: >> cx25843-24 found @ 0x88 (ivtv i2c driver #1) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.833014] tda9887 5-0043: >> creating new instance >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.833017] tda9887 5-0043: >> tda988[5/6/7] found >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.834052] tuner 5-0043: Tuner 74 >> found with type(s) Radio TV. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.839893] tuner 5-0061: Tuner -1 >> found with type(s) Radio TV. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.845534] wm8775 5-001b: chip >> found @ 0x36 (ivtv i2c driver #1) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.863936] tuner-simple 5-0061: >> creating new instance >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.863940] tuner-simple 5-0061: >> type set to 57 (Philips FQ1236A MK4) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865665] ivtv1: Registered >> device video1 for encoder MPG (4096 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865692] ivtv1: Registered >> device video33 for encoder YUV (2048 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865717] ivtv1: Registered >> device vbi1 for encoder VBI (1024 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865743] ivtv1: Registered >> device video25 for encoder PCM (320 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865745] ivtv1: Initialized >> card: WinTV PVR 500 (unit #2) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.865799] ivtv: End >> initialization >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.913467] tda9887 4-0043: >> creating new instance >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.913470] tda9887 4-0043: >> tda988[5/6/7] found >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.914339] tuner 4-0043: Tuner 74 >> found with type(s) Radio TV. >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.920094] tuner 4-0061: Tuner -1 >> found with type(s) Radio TV. > > Every thing appears OK for ivtv and cx18. > > >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.944043] >> saa7164_downloadfirmware() no first image >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.944055] >> saa7164_downloadfirmware() Waiting for firmware upload >> (NXP7164-2010-03-10.1.fw) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.964660] JFS: nTxBlock = 8192, >> nTxLock = 65536 >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.982069] cs5345 3-004c: chip >> found @ 0x98 (cx18 i2c driver #0-0) >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.986133] tuner-simple 4-0061: >> creating new instance >> Feb 11 09:22:21 mythtv-primary kernel: [ 12.986136] tuner-simple 4-0061: >> type set to 85 (Philips FQ1236 MK5) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.000831] cx18-0: Registered >> device video2 for encoder MPEG (64 x 32.00 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.000839] DVB: registering new >> adapter (cx18) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.001366] ppdev: user-space >> parallel port driver >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.093375] >> saa7164_downloadfirmware() Upload failed. (file not found?) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.093380] Failed to boot >> firmware, no features registered > > Your HVR-2250 probably isn't going to work, given those messages about a > missing firmware file. > >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.250727] EXT4-fs (sda1): >> mounted filesystem with ordered data mode. Opts: (null) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.510643] EXT4-fs (sdd1): >> mounted filesystem with ordered data mode. Opts: (null) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.673594] ivtv0: Loaded >> v4l-cx2341x-enc.fw firmware (376836 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.701587] ivtv1: Loaded >> v4l-cx2341x-enc.fw firmware (376836 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772527] k8temp 0000:00:18.3: >> Temperature readouts might be wrong - check erratum #141 >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772807] EDAC amd64: DRAM ECC >> disabled. >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772813] EDAC amd64: ECC >> disabled in the BIOS or no ECC capability, module will not load. >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772814] Either enable ECC >> checking or force module loading by setting 'ecc_enable_override'. >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.772815] (Note that use of the >> override may cause unknown side effects.) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.872180] ivtv0: Encoder >> revision: 0x02060039 >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883339] MXL5005S: Attached at >> address 0x63 >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883344] DVB: registering >> adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)... >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883461] cx18-0: DVB Frontend >> registered >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883464] cx18-0: Registered DVB >> adapter0 for TS (32 x 32.00 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883501] cx18-0: Registered >> device video34 for encoder YUV (20 x 101.25 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883540] cx18-0: Registered >> device vbi2 for encoder VBI (20 x 51984 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883567] cx18-0: Registered >> device video26 for encoder PCM audio (256 x 4.00 kB) >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883570] cx18-0: Initialized >> card: Hauppauge HVR-1600 >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.883631] cx18: End >> initialization >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.900395] ivtv1: Encoder >> revision: 0x02060039 >> Feb 11 09:22:21 mythtv-primary kernel: [ 13.995615] cx18-alsa: module >> loading... >> Feb 11 09:22:21 mythtv-primary kernel: [ 14.162692] cx18-0: loaded >> v4l-cx23418-cpu.fw firmware (158332 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 14.413193] cx18-0: loaded >> v4l-cx23418-apu.fw firmware V00120000 (141200 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 14.472491] cx18-0: FW version: >> 0.0.74.0 (Release 2007/03/12) >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.305943] nvidia: module license >> 'NVIDIA' taints kernel. >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.305948] Disabling lock >> debugging due to kernel taint >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543106] ACPI: PCI Interrupt >> Link [SGRU] enabled at IRQ 20 >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543114] nvidia 0000:03:00.0: >> PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20 >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543122] nvidia 0000:03:00.0: >> setting latency timer to 64 >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.543127] vgaarb: device changed >> decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.544170] NVRM: loading NVIDIA >> UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011 >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.738362] cx18-0 843: loaded >> v4l-cx23418-dig.fw firmware (16382 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 15.760120] cx18-0 843: verified >> load of v4l-cx23418-dig.fw firmware (16382 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 17.589877] cx25840 5-0044: loaded >> v4l-cx25840.fw firmware (16382 bytes) >> Feb 11 09:22:21 mythtv-primary kernel: [ 17.899715] RPC: Registered named >> UNIX socket transport module. >> >> >> Can anyone tell me if I have an actual firmware bug or if this is >> normal? Can anyone tell me how to test the card for sure to see if it >> is a defective card? > > One last step is to verify that you do in fact have a video signal with > a known good devices (such as a TV). If you have RF analog or RF > digital reception problems, you may want to review this checklist as > well: > > http://ivtvdriver.org/index.php/Howto:Improve_signal_quality > > Regards, > Andy > >> >> -Peter > > > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
