On 10/23/2014 03:34 PM, Devin Heitmueller wrote:
That clears a lot of things up though so I'll try and see if I can change
the input format :-)
I don't know the specifics of the pvrusb2 driver, but you might need
to explicitly set the standard to PAL before trying to set the
resolution. That might be why the call to set the resolution fails
(if the standard is set to NTSC, it won't let you set a resolution
with a height greater than 480).
Devin
Yep that was the case!
I managed to fix it, thank you so much :-)
Video Standard = 0x000000ff
PAL-B/B1/G/H/I/D/D1/K
Format Video Capture:
Width/Height : 720/576
Pixel Format : ''
Field : Interlaced
Bytes per Line: 0
Size Image : 32768
Colorspace : Unknown (00000000)
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 0, Height 0
Default : Left 0, Top 0, Width 0, Height 0
Pixel Aspect: 0/0
Crop: Left 0, Top 0, Width 720, Height 576
Answer was:
545 v4l2-ctl -S
546 v4l2-ctl --list-standards
547 v4l2-ctl -s 0
Best Regards,
Kaya
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
