hello, i'm running debian/unstable amd64 port on an AMD Athlon64 with a Hauppauge WinTV PVR 350. I've compiled my own 2.6.9 kernel, running udev and matroxfb [framebuffer] (don't know any other important configuration).
i've successfully compiled and installed ivtv drivers and utils, and loading ivtv and ivtv-fb modules works well (see end of mail) anyway, all tv applications and scantv fail with strange errors. i've also tried to configure XFree86 4.3.0 to support my PVR 350, but failed too. for example, scantv gives directly after start the following errors/warnings: # scantv ioctl: VIDIOC_QUERYMENU(id=134217728;index=1;name="44.1 kHz";reserved=816): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217729;index=1;name="Layer 1";reserved=896): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217730;index=1;name="[L1/L2] Free fmt";reserved=976): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217731;index=1;name="Stereo";reserved=1056): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217732;index=1;name="Subbands 4-31/bound=4";reserved=1136): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217733;index=1;name="None";reserved=1216): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217734;index=1;name="CRC off";reserved=1296): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217735;index=1;name="Copyright off";reserved=1376): Invalid argument ioctl: VIDIOC_QUERYMENU(id=134217736;index=1;name="Copy";reserved=1456): Invalid argument saa7115: status: 0xc0 [here i select PAL as TV Norm and west europe as frequency table] saa7115: decoder set picture bright=128 contrast=64 saturation=64 hue=0 saa7115: decoder set picture bright=128 contrast=64 saturation=64 hue=0 saa7115: decoder set picture bright=128 contrast=64 saturation=64 hue=0 saa7115: decoder set picture bright=128 contrast=64 saturation=64 hue=0 saa7115: decoder disable output tuner: tuner type not set saa7115: decoder enable output invalid value for input: television valid choices for "input": "Composite 0", "Composite 1", "Composite 2", "Composite 3", "Tuner 0", "Composite 4", "S-Video 0", "S-Video 1", "S-Video 2", "S-Video 3" ivtv: Switching standard to PAL. saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard [...] finally some missing /dev/vbi crashes scantv, but even with -C /dev/vbi0 it gives vbi: open failed [/dev/vbi8] open /dev/vbi8: Invalid argument fbtv and xawtv segfault with similar 'ioctl' debug output. do you have any glue why these problems appear, or maybe just know which step i missed? thanks for advice ... bye jonas and below the output modprobe: # modprobe ivtv Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3b) loading ivtv: Linux version: 2.6.9-amd64 preempt gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: VIA PCI device: 0x3188 vendor: 0x1106 ivtv: i2c attach [client=eeprom,ok] ivtv: i2c client addr: 0x50 not found! ivtv: Error -19 reading Hauppauge eeprom. ivtv: Possible causes: the tveeprom module was not loaded, or ivtv: the eeprom kernel module was loaded before the tveeprom module. tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter DDC:fb0 #0 (0x10009) saa7115: detecting saa7115 client on address 0x40 saa7115: writing init values saa7115: status: (1E) 0x01, (1F) 0x01 saa7115: starting probe for adapter DDC:fb0 #1 (0x10009) saa7115: starting probe for adapter MAVEN:fb0 (0x10009) saa7115: starting probe for adapter ISA main adapter (0x0) saa7115: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0) saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[1],ok] saa7115: status: (1E) 0x40, (1F) 0xc0 saa7127: video encoder driver version V 0.3 loaded saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jan 3 2005 14:48:26 ivtv: i2c attach [client=MSP3418W-B3,ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware is buggy, use version 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 9 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Could not detect tuner standard, defaulting to NTSC. ivtv: ivtv_enc_thread: pid = 9053, itv = 0xffffffffa00421a0 ivtv: ivtv_dec_thread: pid = 9054, itv = 0xffffffffa00421a0 tuner: tuner type not set ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. tuner: tuner type not set saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== # modprobe ivtv-fb ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 480] ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xc9510000, mapped to 0xffffff0003010000, size 1350k ivtv-osd: mode is 720x480x32, linelength=2880 ivtv-osd: fb2: iTVC15 TV out frame buffer device ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
