On 01/08/2005 09:36 PM, Frutillar wrote:
I forgot to say that my setup is:
MiniITX M10000
PVR-350
Mandrake Linux 10.1 Official (2.6.8.1-12mdk)
ivtv 0.3.2a
Not according to the output below...
I also missed mentioning that I get a ¨cat: /dev/video0: Input/output error¨
when I do ¨cat /dev/video0¨ and the only lines in messages are the ones I
list below.
Thanks!!
---------- Forwarded Message ----------
Subject: ivtv notg loading
Date: Saturday 08 January 2005 05:32 pm
From: Frutillar <[EMAIL PROTECTED]>
To: ivtv-users@lists.sourceforge.net
Hi.
I finally got the patch applied to my 2.6.8.1 kernel and ivtv compiled and
installed. However, it seems ivtv is not loading.
Your thoughts would be welcome!!
I did
su
make install
depmod -ae
modprobe ivtv
exit
checked cat /dev/video0 and the log in /var/log/messages without any results.
Then I did
su
modprobe -r ivtv
depmod -ae
modprobe ivtv
exit
and the same... no results.
What I have in /etc/modules.conf is
alias autofs autofs4
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-61 lirc_i2c
add above ivtv lirc_dev lirc_i2c
Following are the relevant lines in /var/log/messages:
Jan 8 17:21:04 localhost kernel: Linux video capture interface: v1.00
Jan 8 17:21:04 localhost kernel: ivtv: version 0.1.9 (0.1.10pre1) loading
0.1.9??????
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #0
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #1
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #2
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #3
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #4
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #5
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #6
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #7
Jan 8 17:21:04 localhost kernel: ivtv: Autodetecting cardtype for card #8
Jan 8 17:21:04 localhost kernel: ivtv: SGarray_size = 420, DSGarray_size =
16 Jan 8 17:21:04 localhost kernel: ivtv: Found an iTVC15 based chip
Jan 8 17:21:07 localhost kernel: ivtv: Encoder revision: 0x02040011
Jan 8 17:21:07 localhost kernel: ivtv: Decoder revision: 0x02020023
Jan 8 17:21:07 localhost kernel: ivtv: i2c client addr: 0x61 not found!
Jan 8 17:21:07 localhost kernel: ivtv: i2c client addr: 0x61 not found!
Jan 8 17:21:07 localhost kernel: ivtv: i2c client addr: 0x40 not found!
modules not loading
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 0
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 32
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 224
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 24
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 16
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 225
Jan 8 17:21:07 localhost kernel: ivtv: Registered v4l2 device, minor 64
Jan 8 17:21:07 localhost kernel: ivtv: loaded
How about the rest of the output? Seems there's some important info
missing...
Mike
tac /var/log/messages |
sed -n '/=\ \ END INIT IVTV\ \ =/,/= START INIT IVTV =/p;
/= START INIT IVTV =/q' |
tac
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
