I'm running debian testing (Sarge) and not getting anything from /dev/video0. I'm using the stock kernel-image-2.4.27-2-k7 from debian. I've got a PVR250MCE, and I'm running the 0.2.0 ivtv drivers. The modules load but I get errors.
'modprobe ivtv' generates the following: i2c-algo-bit.o: i2c bit algorithm module Linux video capture interface: v1.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3g) loading ivtv: Linux version: 2.4.27-2-k7 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Found an iTVC16 based chip ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tveeprom: Hauppauge: model = 26559, rev = C257, serial# = 7525817 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x008d2557, Revision 0x00000001 ivtv: PAL tuner detected ivtv: SECAM tuner detected ivtv: Radio detected tuner: chip found @ 0xc2 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) ivtv: Setting audio matrix to input 3, output 1 ivtv: i2c client addr: 0x40 not found! ivtv: Switching standard to PAL. ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x21 not found! ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== $ cat /dev/video0 > test.mpg ivtv: i2c client addr: 0x21 not found ivtv: i2c client addr: 0x21 not found ivtv: i2c client addr: 0x21 not found ivtv: ENC:User stopped capture. I've cleaned up modules.conf so it only has: ### update-modules: start processing /etc/modutils/ivtv alias char-major-81 videodev alias char-major-81-0 ivtv ########end adding for ivtv I'm in Australia so I've set inputs to PAL: $ ivtvctl -UPF ioctl: VIDIOC_G_FMT Type : Video Capture Width : 720 Height : 576 ioctl: VIDIOC_G_INPUT Input = 4 ioctl: VIDIOC_G_STD Standard = 0x000000ff Any help would be greatly appreciated. Thanks in advance. ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
