On Tue, 08 Mar 2005 09:22:36 -0500, John Kuhn <[EMAIL PROTECTED]> wrote: > just as a note.. i could never get my 350 to work stable on a via > chipset.. i dont know if that's your problem but it did similar things to me > > --John
OK third hang today. This time I was looking at MythTV program schedules. The box froze. Had to pulled power again. Hangs like that completely kills the machine. It's not good for the longevity of the box... I don't expect anything particular in the log (haven't restarted the machine yet). I am willing to investigate the issue. I just need to have an idea on where to look. Could it happen because of a software bug, or it it more likely to be due to a hardware? Here are some of the things I will do: - change the PVR350 firmware to the recommended one - run the mythtv frontend without the setuid bit set - enable some debugging (but where?) Feel free to give me ideas on how to proceed. Cheers, Jerome Machine Config didn't change: - epia / PVR350 - myth 0.17 + XvMC - mplayer .10pre6 + xvmc - kernel 2.6.11 + dri + ... ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
