Hi! I've installed KnoppMyth R5A12, and I'm having trouble tuning. I've done a scan in windows, so I know what frequencies I should use, but in linux all I get is static. I have a PVR 350, the version with SCART output. I'm just trying to get something in myth/X, I'm not trying tv-out yet. I've read this list and tried thousands of options for /etc/modules.conf, but nothing fixes it. Here's my dmesg:
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3a) loading ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3205 vendor: 0x1106 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x40, (1F) 0xc0 tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7672279 tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38) tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = CS5331 (type = 9) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001 ivtv: PAL tuner detected ivtv: SECAM tuner detected ivtv: Radio detected saa7127: video encoder driver version V 0.3 loaded saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[0],ok] ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 9 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Setting Tuner 38 ivtv: Setting audio matrix to input 3, output 1 ivtv: i2c client addr: 0x40 not found! ivtv: Switching standard to PAL. ivtv: i2c client addr: 0x40 not found! saa7115: decoder set norm PAL saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set PAL Video Mode saa7127: Selecting PAL video Standard ivtv: ivtv_enc_thread: pid = 2080, itv = 0xdef15920 ivtv: ivtv_dec_thread: pid = 2081, itv = 0xdef15920 ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x40 not found! saa7115: decoder disable output saa7115: decoder set input (0) saa7115: now setting Composite input ivtv: Setting audio matrix to input 1, output 1 ivtv: i2c client addr: 0x40 not found! saa7115: decoder enable output ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x40 not found! saa7115: decoder set size eth0: no IPv6 routers present ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x40 not found! saa7115: decoder disable output saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: i2c client addr: 0x40 not found! saa7115: decoder enable output ts: Compaq touchscreen protocol output ivtv: i2c client addr: 0x40 not found! ivtv: i2c client addr: 0x40 not found! saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0 saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0 I've stripped all options now, so I only have this in modules.conf: alias char-major-81 videodev alias char-major-61 lirc_i2c All the "ivtv: i2c client addr: 0x40 not found!" worry me, that mean something isn't loaded right? What might that be? I have tuner, tveeprom, ivtv, videodev, saa7115 and saa7127 loaded, do I need anything else? // Anders ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_ide95&alloc_id396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
