Can you use pl-tune (or whatever the exact name of the utility in the
ivtv/utils directory) to change the channel? If that does not work, check
if you get a tuner module when you do lsmod. If you don't see tuner even if
ivtv and other related modules are loaded, that probably means you don't
have bttv or i2c support in your kernel. You must compile your kernel using
bttv and i2c to get the tuner module to build and load automatically when
you modprobe ivtv.
good luck
jose luis
Anders Öhrt
<[EMAIL PROTECTED]
.se> To
Sent by: <ivtv-users@lists.sourceforge.net>
ivtv-users-admin@ cc
lists.sourceforge
.net Subject
No Phone Info [Ivtv-users] PVR350 not tuning,
Available "ivtv: i2c client addr: 0x40 not
found!"
03/08/2005 10:45
AM
Please respond to
[EMAIL PROTECTED]
sourceforge.net
Hi!
I've installed KnoppMyth R5A12, and I'm having trouble tuning. I've done a
scan in windows, so I know what frequencies I should use, but in linux all
I
get is static. I have a PVR 350, the version with SCART output. I'm just
trying to get something in myth/X, I'm not trying tv-out yet. I've read
this
list and tried thousands of options for /etc/modules.conf, but nothing
fixes
it. Here's my dmesg:
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.2.0 (rc3a) loading
ivtv: Linux version: 2.6.9-chw-4 SMP preempt 586 gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: VIA PCI device: 0x3205 vendor: 0x1106
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by insmod
option
tuner: The type=<n> insmod option will go away soon.
tuner: Please use the tuner=<n> option provided by
tuner: tv aard core driver (bttv, saa7134, ...) instead.
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x40, (1F) 0xc0
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7672279
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557,
Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
saa7127: video encoder driver version V 0.3 loaded
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 38
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found!
ivtv: Switching standard to PAL.
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: ivtv_enc_thread: pid = 2080, itv = 0xdef15920
ivtv: ivtv_dec_thread: pid = 2081, itv = 0xdef15920
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder disable output
saa7115: decoder set input (0)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 1, output 1
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder enable output
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set size
eth0: no IPv6 routers present
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder disable output
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder enable output
ts: Compaq touchscreen protocol output
ivtv: i2c client addr: 0x40 not found!
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set picture bright=128 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=128 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
I've stripped all options now, so I only have this in modules.conf:
alias char-major-81 videodev
alias char-major-61 lirc_i2c
All the "ivtv: i2c client addr: 0x40 not found!" worry me, that mean
something isn't loaded right? What might that be? I have tuner, tveeprom,
ivtv, videodev, saa7115 and saa7127 loaded, do I need anything else?
// Anders
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_ide95&alloc_id396&op=click
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
