Hello All, I have a Hauppage WinTV PVR 150 card and can't seem to get a good video and audio out if it.
When I load ivtv with: modprobe ivtv tuner=55 ivtv_std=2 I get okay video and no sound with mplayer /dev/video0. I have no problems with audio when playing avis and such. I accidentaly noticed that when ivtv is loaded like this: modprobe ivtv tuner=55 ivtv_std=1 I get both sound and video, however, the the video is more like still images changing every couple of seconds and the delay keeps growing pretty fast. Sound is okay. during playback my system is about 90% idle, the ivtv is not logging anything about frames being skipped i'm using ivtv version 0.3.2i and have tried a couple of older ones as well. I'm trying this in Gentoo and my kernel is 2.6.10-gentoo-r6. This is what I get when I load the ivtv modules: Mar 12 19:58:41 vcr Linux video capture interface: v1.00 Mar 12 19:58:41 vcr cx25840: Ignoring new-style parameters in presence of obsolete ones Mar 12 19:58:41 vcr ivtv: version 0.3.2 (i) loading Mar 12 19:58:41 vcr ivtv: Unknown card: vendor/device: 4444/0016, subsystem vendor/device: 0070/0003 Mar 12 19:58:41 vcr ivtv: Defaulting to WinTV PVR 150 card Mar 12 19:58:41 vcr ivtv: Please mail the vendor/device and subsystem vendor/device IDs and what kind of Mar 12 19:58:41 vcr ivtv: card you have to the ivtv-devel mailinglist: http://sourceforge.net/projects/ivtv Mar 12 19:58:41 vcr ivtv: Prefix your subject line with [UNKNOWN CARD]. Mar 12 19:58:41 vcr ivtv: Found an iTVC16 based chip Mar 12 19:58:41 vcr ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5 Mar 12 19:58:41 vcr ivtv: XXX PCI device: 0x1a30 vendor: 0x8086 Mar 12 19:58:42 vcr cx25840: Unable to open FW file '/lib/modules/HcwMakoA.ROM'. Mar 12 19:58:42 vcr cx25840: Failed to load any FW image file Mar 12 19:58:42 vcr tveeprom: Hauppauge: model = 26034, rev = C197, serial# = 7766625 Mar 12 19:58:42 vcr tveeprom: tuner = LG PAL (TAPE Series) (idx = 97, type = 55) Mar 12 19:58:42 vcr tveeprom: tuner fmt = PAL(D/K) (eeprom = 0x44, v4l2 = 0x00000e07) Mar 12 19:58:42 vcr tveeprom: audio_processor = MSP3400C (type = 4) Mar 12 19:58:42 vcr tuner: Ignoring new-style parameters in presence of obsolete ones Mar 12 19:58:42 vcr tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Mar 12 19:58:42 vcr wm8775: Ignoring new-style parameters in presence of obsolete ones Mar 12 19:58:42 vcr wm8775: Setting register ADCFMT (7) to 1, R11.0..1, old value 02 Mar 12 19:58:42 vcr wm8775: Setting register ADCMS (8) to 1, R12.8..8, old value 00 Mar 12 19:58:42 vcr wm8775: Setting register DCY (24) to 8, R18.4..7, old value 03 Mar 12 19:58:42 vcr wm8775: Setting register NGAT (27) to 1, R19.0..0, old value 00 Mar 12 19:58:42 vcr wm8775: Setting register LRBOTH (30) to 1, R21.8..8, old value 00 Mar 12 19:58:42 vcr wm8775: Setting register AMX (33) to 15, R21.0..3, old value 01 Mar 12 19:58:42 vcr wm8775: Updating register 0 (R23), config: 2e01 active: 2e00. Mar 12 19:58:42 vcr wm8775: Skipping register 1 (R7), config: 0e00 active: 0e00. Mar 12 19:58:42 vcr wm8775: Updating register 2 (R11), config: 1622 active: 1621. Mar 12 19:58:42 vcr wm8775: Updating register 3 (R12), config: 1802 active: 1902. Mar 12 19:58:42 vcr wm8775: Skipping register 4 (R13), config: 1a00 active: 1a00. Mar 12 19:58:42 vcr wm8775: Skipping register 5 (R14), config: 1ccf active: 1ccf. Mar 12 19:58:42 vcr wm8775: Skipping register 6 (R15), config: 1ecf active: 1ecf. Mar 12 19:58:42 vcr wm8775: Skipping register 7 (R16), config: 207b active: 207b. Mar 12 19:58:42 vcr wm8775: Skipping register 8 (R17), config: 2200 active: 2200. Mar 12 19:58:42 vcr wm8775: Updating register 9 (R18), config: 2432 active: 2482. Mar 12 19:58:42 vcr wm8775: Updating register 10 (R19), config: 2600 active: 2601. Mar 12 19:58:42 vcr wm8775: Skipping register 11 (R20), config: 2826 active: 2826. Mar 12 19:58:42 vcr wm8775: Updating register 12 (R21), config: 2a01 active: 2b0f. Mar 12 19:58:43 vcr ivtv: Configuring WinTV PVR 150 card with 5 streams Mar 12 19:58:43 vcr ivtv: Create DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes total Mar 12 19:58:43 vcr ivtv: Registered v4l2 device, streamtype 0 minor 0 Mar 12 19:58:43 vcr ivtv: Create DMA stream 1 Mar 12 19:58:43 vcr ivtv: Registered v4l2 device, streamtype 1 minor 32 Mar 12 19:58:43 vcr ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total Mar 12 19:58:43 vcr ivtv: Registered v4l2 device, streamtype 2 minor 224 Mar 12 19:58:43 vcr ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total Mar 12 19:58:43 vcr ivtv: Registered v4l2 device, streamtype 3 minor 24 Mar 12 19:58:43 vcr ivtv: Create stream 4 Mar 12 19:58:43 vcr ivtv: Registered v4l2 device, streamtype 4 minor 64 Mar 12 19:58:43 vcr ivtv: Setting Tuner 55 Mar 12 19:58:43 vcr tuner: type set to 55 (LG PAL (TAPE series)) by ivtv i2c driver #0 Mar 12 19:58:43 vcr ivtv: Initialized WinTV PVR 150, card #0 Mar 12 19:58:43 vcr bttv: driver version 0.9.15 loaded Mar 12 19:58:43 vcr bttv: using 8 buffers with 2080k (520 pages) each for capture Mar 12 19:58:43 vcr cx2388x v4l2 driver version 0.0.4 loaded Mar 12 19:58:43 vcr lirc_i2c: chip found @ 0x71 (Hauppauge IR (PVR150)) Mar 12 19:58:43 vcr lirc_dev: lirc_register_plugin:sample_rate: 10 Any tips would be appreciated. pete ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
