|
hi all, i have a myth box i had to rebuild recently. i installed FC3 with my sb-live value connected, and without disabling the onboard via sound chipset (kt600 chipset - snd-via82xx module). i got updates with apt-get, including kernel-2.6.10-1.770_FC3. i then setup myth according to the instructions here: http://wilsonet.com/mythtv/fcmyth.php. i can play .wav or other sounds through either card, but can't get sound output from the pvr-250. everything looks like its working, no errors in dmesg etc., but there is no sound, no matter how much i fiddle with mixer settings for either card. i have also tried removing the sb-live, or disabling the via onboard, and then configuring sound with alsaconf. this causes kde to complain that alsa didn't load, even though i can play sound through the card. gnome will not start at all in this condition. i also tried the renaming msp3400.ko, and running depmod again, as suggested on jarod's site, but to no avail. gnome and kde are not happy until i enable both sound cards again. this setup worked fine before i had to rebuild. any suggestions? these are the the ivtv packages i pulled down with apt-get: [EMAIL PROTECTED] ~]# rpm -qa | grep ivtv ivtv-kmdl-2.6.10-1.770_FC3-0.2.0-65_rc3g.rhfc3.at ivtv-firmware-dec-2.02.023-4.at ivtv-firmware-enc-2.04.024-4.at ivtv-firmware-1.8a-4.at ivtv-0.2.0-65_rc3g.rhfc3.at perl-Video-ivtv-0.13-6.rhfc3.at here is my modprobe.conf (both cards installed): alias char-major-61 lirc_i2c alias wlan0 ndiswrapper alias eth0 sk98lin alias scsi_hostadapter sata_via alias usb-controller ehci-hcd alias usb-controller1 uhci-hcd alias ieee1394-controller ohci1394 alias tveeprom tveeprom-ivtv options ivtv tuner=39 debug=0 options tuner type=39 install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c alias snd-card-0 snd-via82xx options snd-card-0 index=0 install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-via82xx alias snd-card-1 snd-emu10k1 options snd-card-1 index=1 install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1 # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 1.0.8 --- alias snd-card-0 snd-emu10k1 alias sound-slot-0 snd-emu10k1 # --- END: Generated by ALSACONF, do not edit. --- here is mplayer output with both cards installed: [EMAIL PROTECTED] ~]# mplayer -vo xv /dev/video0 MPlayer 1.0pre6-3.4.2 (C) 2000-2004 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0 : No such file or directory Can't init input joystick Setting up LIRC support... Playing /dev/video0. MPEG-PS file format detected. VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 9600.0 kbps (1200.0 kbyte/s) ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 48000->192000 (384.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian) alsa-init: got device=0, subdevice=0 alsa-init: 1 soundcard found, using: default alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian AO: [alsa] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... Starting playback... VDec: vo config request - 720 x 480 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xv] 720x480 => 720x540 Planar YV12 A: 119.2 V: 118.7 A-V: 0.488 ct: -0.324 3535/3535 28% 4% 21.9% 164 0 there are no errors, but no sound either... this is what happens when i try to play video with only one sound card installed: [EMAIL PROTECTED] ~]# mplayer -vo xv /dev/video0 MPlayer 1.0pre6-3.4.2 (C) 2000-2004 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0 : No such file or directory Can't init input joystick Setting up LIRC support... Playing /dev/video0. MPEG-PS file format detected. VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 9600.0 kbps (1200.0 kbyte/s) ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 48000->192000 (384.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian) alsa-init: got device=0, subdevice=0 alsa-init: 1 soundcard found, using: default alsa-init: playback open error: No such file or directory audio_out: alsa9 and alsa1x modules were removed, use -ao alsa instead. [EMAIL PROTECTED] ~]# mplayer doesn't open. with the '-ao alsa' option i get video, but no sound: [EMAIL PROTECTED] ~]# mplayer -ao alsa -vo xv /dev/video0 MPlayer 1.0pre6-3.4.2 (C) 2000-2004 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP Thoroughbred (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0 : No such file or directory Can't init input joystick Setting up LIRC support... Playing /dev/video0. MPEG-PS file format detected. VIDEO: MPEG2 720x480 (aspect 2) 29.970 fps 9600.0 kbps (1200.0 kbyte/s) ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 48000->192000 (384.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local display) ========================================================================== Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough VDec: vo config request - 720 x 480 (preferred csp: Mpeg PES) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. VDecoder init failed :( Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b Selected video codec: [mpeg12] vfm:libmpeg2 (MPEG 1 or 2 (libmpeg2)) ========================================================================== Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian) alsa-init: got device=0, subdevice=0 alsa-init: 1 soundcard found, using: default alsa-init: playback open error: No such file or directory Could not open/initialize audio device -> no sound. Audio: no sound Starting playback... VDec: vo config request - 720 x 480 (preferred csp: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. VO: [xv] 720x480 => 720x540 Planar YV12 here is dmesg output for ivtv: lirc_dev: no version for "struct_module" found: kernel tainted. lirc_dev: IR Remote Control driver registered, at major 61 Linux video capture interface: v1.00 ivtv: Unknown parameter `debug' ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.2.0 (rc3g) loading ivtv: Linux version: 2.6.10-1.770_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 250 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3189 vendor: 0x1106 tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7368850 tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3445 (type = 12) ivtv: i2c attach [client=tveeprom[0],ok] ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x00891615, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] tuner: type set to 39 (LG NTSC (newer TAPC series)) by insmod option tuner: The type=<n> insmod option will go away soon. tuner: Please use the tuner=<n> option provided by tuner: tv aard core driver (bttv, saa7134, ...) instead. saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[0],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 msp34xx: init: chip=MSP3445G-B8 +nicam +simple +simpler +radio mode=simple ivtv: i2c attach [client=MSP3445G-B8,ok] msp3410: daemon started ivtv: Encoder revision: 0x02040024 ivtv: Encoder Firmware is buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 250 card with 5 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Setting Tuner 39 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv: ivtv_enc_thread: pid = 2733, itv = 0xe0b4e020 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture lirc_i2c: chip found @ 0x18 (Hauppauge IR) ivtv: i2c attach [client=Hauppauge IR,ok] lirc_dev: lirc_register_plugin:sample_rate: 10 saa7115: starting probe for adapter SMBus Via Pro adapter at e800 (0x0) ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users |
