Hi, First I'd like to say thanks to everyone involved in this project, for all your work and time spent in making this driver available to the rest of us.
I'm having some problems with my setup, so, I was hoping someone in this
list could help a poor soul enjoying some tv on his PC while browsing
the net and irc'ing :>
I'll start by describing my setup along with any relevant versions:
[Setup]
o Gentoo amd64
o ivtv 0.3.2 (z)
o mythtv 0.17
o dev-perl/Video-Frequencies-0.3
o dev-perl/Video-ivtv-0.13
o dev-perl/Config-IniFiles-2.38
o ptune & ptune-ui supplied by the ivtv 0.3.2(z)
[Problem]
The channels can't be tuned, all that is seen is static, I can however,
listen to the sound from some channels, but not all.
I tried the stable drivers as well, with the same results.
[Configuration]
Amd64 3500+/1024MB ram/Gforce2 GTS 32DDR (non-tv-out)
Hauppauge-PVR-350 (rev-01)
[modules]
Module Size Used by
msp3400 28320 0
saa7127 13596 0
saa7115 13140 0
tuner 20708 0
tveeprom 14900 0
ivtv 825508 3
i2c_algo_bit 8584 1 ivtv
w83627hf 31144 0
i2c_sensor 3200 1 w83627hf
i2c_isa 2432 0
[/etc/modules.d/ivtv]
alias char-major-81 videodev
alias char-major-81-0 ivtv
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.2 (z) loading
ivtv: Linux version: 2.6.11.7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 3 (level, low) -> IRQ 3
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596706
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7115: starting probe for adapter ISA main adapter (0x0)
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x40, (1F) 0xc0
saa7127: Ignoring new-style parameters in presence of obsolete ones
saa7127: video encoder driver version V 0.3 loaded
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[50],ok]
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Apr 17 2005 02:08:19
ivtv: i2c attach [client=MSP3418W-B3,ok]
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216
kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create stream 2 using 40 52224 byte buffers 0 kbytes total
ivtv: Allocate stream 2 using 40 52224 byte buffers 2097152 kbytes
total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes
total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes
total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 6 using 1024 2048 byte buffers 0 kbytes total
ivtv: Allocate stream 6 using 1024 2048 byte buffers 262144 kbytes
total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Allocate stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 24 86400 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 8 using 24 86400 byte buffers 2097152 kbytes
total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 38
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv
i2c driver #0
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: ivtv_enc_thread: pid = 8613, itv = 0xffffffff88035520
ivtv: ivtv_dec_thread: pid = 8614, itv = 0xffffffff88035520
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
saa7115: decoder disable output
saa7115: decoder enable output
saa7115: decoder set picture bright=127 contrast=64 saturation=64 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set size
saa7115: decoder disable output
saa7115: decoder enable output
saa7115: decoder disable output
saa7115: decoder enable output
...
Thanks for any help.
--
nuno alexandre
0416 95FD B8B2 AB9A 16C4 323D 9628 6E7B D4C9 1A22
signature.asc
Description: This is a digitally signed message part
