Hi,
ive noticed that the following errors have been present for the last 5,
6 releases of the ivtv driver. I think it started after the 0.3.3z
release.
syslog:
ivtv: ENC IRQ OVERFLOW: #0 Stealing a Buffer, 2 currently allocated
ivtv: ENC IRQ OVERFLOW: #1 Stealing a Buffer, 2 currently allocated
ivtv: ENC IRQ OVERFLOW: #2 Stealing a Buffer, 2 currently allocated
ivtv: ENC IRQ OVERFLOW: #3 Stealing a Buffer, 2 currently allocated
ivtv: ENC IRQ OVERFLOW: #4 Stealing a Buffer, 2 currently allocated
ivtv: ENC IRQ OVERFLOW: #5 Stealing a Buffer, 2 currently allocated
... it goes on at an incredible rate while you are running a liveTV
stream.
Atm im using the ivtv 0.3.3k and Im unable to change channels using the
ptune.pl scripts.
anyone been having the same issues, or is it only me ?
Thanks.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.3.3 (j) loading
ivtv: Linux version: 2.6.11.7 gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 3 (level, low) -> IRQ 3
ivtv: XXX PCI device: 0x00e1 vendor: 0x10de
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode,
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Apr 24 2005 18:49:44
ivtv: i2c attach [client=MSP3418W-B3,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[50],ok]
saa7115: status: (1E) 0x80, (1F) 0x90
saa7127: detecting saa7127 client on address 0x88
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[1],ok]
tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7596706
tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 38)
tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom =
0x74, v4l2 = 0x00400e17)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[50],ok]
ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model
0x00ad2557, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: SECAM tuner detected
ivtv: Radio detected
ivtv: Failed to load module tuner
ivtv: Encoder revision: 0x02050032
ivtv: Encoder Firmware may be buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 10 streams
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216
kbytes total
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create DMA stream 1
ivtv: Allocate DMA stream 1
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 kbytes
total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes
total
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create stream 4
ivtv: Allocate stream 4
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 5 using 16 65536 byte buffers 1048576 kbytes
total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create DMA stream 6 using 2048 2048 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 6 using 2048 2048 byte buffers 262144 kbytes
total
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create stream 7
ivtv: Allocate stream 7
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Create DMA stream 8 using 24 86400 byte buffers 0 kbytes total
ivtv: Allocate DMA stream 8 using 24 86400 byte buffers 2097152 kbytes
total
ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total
ivtv: Setting Tuner 38
ivtv: i2c client id: 0x02 not found!
saa7115: decoder set input (4)
saa7115: now setting Composite input
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: i2c client id: 0x02 not found!
ivtv: ivtv_enc_thread: pid = 10991, itv = 0xffffffff88156c60
ivtv: ivtv_dec_thread: pid = 10992, itv = 0xffffffff88156c60
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0
ivtv: ==================== END INIT IVTV ====================
--
nuno alexandre
pub: D4C91A22
key: 0416 95FD B8B2 AB9A 16C4 323D 9628 6E7B D4C9 1A22
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
