Hi, I have a PVR-150 (model 1046 according to the box). The ivtv module loads fine and seems to autodetect everything.
I get perfect video capture on the composite input, but no audio from the audio in. I don't currently have any options setup in modules.conf, everything seems to work just by modprobing the ivtv module. Here's my dmesg output: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.3 (h) loading ivtv: Linux version: 2.6.11.7 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: VIA PCI device: 0x3205 vendor: 0x1106 tveeprom: Hauppauge: model = 26039, rev = C155, serial# = 7796778 tveeprom: tuner = Philips FQ1216ME MK3 (idx = 55, type = 38) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L) PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio_processor = MSP3400C (type = 4) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 38, Tuner formats 0x00400e17, Radio: yes, Model 0x008d1555, Revision 0x00000000 ivtv: PAL tuner detected ivtv: SECAM tuner detected ivtv: Radio detected tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] cx25840: starting probe for adapter TT-Budget/WinTV-NOVA-CI PCI (0x60000) cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 13883 loaded. cx25840: FW image md5 digest: a6f6a90a3be338cdb89d59e835798408 cx25840: FW image sha1 digest: ad2872fb98ad43b6c4afa45d239a57010edebe84 cx25840: Status: cx258423 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02050032 ivtv: Encoder Firmware may be buggy, use version 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 1024 16384 byte buffers 0 kbytes total ivtv: Allocate DMA stream 0 using 1024 16384 byte buffers 16777216 kbytes totalivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 ivtv: Allocate DMA stream 1 ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 121 34632 byte buffers 0 kbytes total ivtv: Allocate DMA stream 2 using 121 34632 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Allocate DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Allocate stream 4 ivtv: Setting Tuner 38 tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0 cx25840: decoder set input (6) cx25840: Tuner Input ivtv: ivtv_enc_thread: pid = 3689, itv = 0xf8e96ca0 cx25840: set audio: 0x01 ivtv: Switching standard to PAL. cx25840: decoder set norm PAL cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ==================== END INIT IVTV ==================== -- Chris ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
