Ok.. I have been spending forever trying to get this
thing working on my own, and I am sooo close yet so far.
I have managed to get it to tune but all the channels are
off by one. This happens on tuner 41 and a few others. Ivtv
autosets to 47 which just gives me static.
What I have done:
Made sure preempt, regparms and 4kstacks are disabled
tried numerous versions 0.2.0-rc3j, 0.3.3u and now 0.3.7a
(actually tried more than those)
started with debian now using knoppmyth R5A16
Tried specifying all tuners between 40 and 60 inclusive
probably other things I have forgotten
It's driving me completely mad, I am sure I am just missing
one small thing, if someone could give me a nundge in the right
direction or point me at a proper howto I would much appreciate it.
One thing I ran across recently that has confused me is the new
tuners patches. I am on kernel 2.6.11.9 and it looked like some
of these were supposed to go into 2.6.10... Am I supposed to be
using the kernel tuner or ivtv? I assume ivtv but have tried both.
I appreciate any help, I have been at this on and off for a couple
months, just got a picture for the first time last night.
Here is my dmesg output, I have cleared all my modules.conf info...
==================== START INIT IVTV ====================
version 0.3.7 (a) loading
Linux version: 2.6.11.9-chw-2 SMP 586 gcc-3.3
In case of problems please include the debug info
between the START INIT IVTV and END INIT IVTV lines when
mailing the ivtv-devel mailinglist.
Autodetected WinTV PVR 150 card
Found an iTVC16 based chip
Jul 27 16:27:02 video kernel: ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10
(level, low) -> IRQ 10
XXX PCI device: 0x7190 vendor: 0x8086
Jul 27 16:27:02 video kernel: tveeprom: Hauppauge: model = 26552, rev = B268,
serial# = 7865587
Jul 27 16:27:02 video kernel: tveeprom: tuner = LG TAPE H001F MK3 (idx = 68,
type = 47)
Jul 27 16:27:02 video kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,
v4l2 = 0x00001000)
Jul 27 16:27:02 video kernel: tveeprom: audio_processor = MSP3410D (type = 5)
i2c attach [client=tveeprom[50],ok]
Jul 27 16:27:02 video kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
i2c attach [client=(tuner unset),ok]
Jul 27 16:27:02 video kernel: cx25840: requesting /lib/modules/HcwMakoA.ROM
Jul 27 16:27:04 video kernel: cx25840: firmware loaded
i2c attach [client=cx25840[50],ok]
i2c attach [client=wm8775[50],ok]
Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598, Revision
0x00000001
NTSC tuner detected
Radio detected
Encoder revision: 0x02040011
Configuring WinTV PVR 150 card with 5 streams
Registered v4l2 device for encoder MPEG minor 0
Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total)
Registered v4l2 device for encoder YUV minor 32
Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total)
Registered v4l2 device for encoder VBI minor 224
Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total)
Registered v4l2 device for encoder PCM audio minor 24
Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total)
Registered v4l2 device for encoder radio minor 64
Create encoder radio stream
Setting Tuner 47
Jul 27 16:27:05 video kernel: tuner: type set to 47 (LG NTSC (TAPE series)) by
ivtv i2c driver #0
ivtv_enc_thread: pid = 4160, itv = 0xe300cf20
ivtv_enc_vbi_thread: pid = 4161, itv = 0xe300cf20
Switching standard to NTSC.
Initialized WinTV PVR 150, card #0
==================== END INIT IVTV ====================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September
19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Ivtv-users mailing list
Ivtv-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ivtv-users
