Over on the mythtv list, there are (at least) four of us who are seeing identical symptoms, so it appears that I'm dealing with the same issue as Scot.
On Sat, Sep 17, 2005 at 03:00:01PM +1000, Ross wrote: > On 9/17/05, Scot L. Harris <[EMAIL PROTECTED]> wrote: > > Trying to install a PVR-500 along with a PVR-350 on a system that is to > > run mythtv 18.1 from the ATRPMs repo. Using ivtv 0.3.7k driver. > > Try the latest svn drivers, a fair bit has changed recently. Do you know how up-to-date the Debian packages at http://www.hellion.org.uk/debian (as suggested to use in the DebianHow To at http://ivtv.writeme.ch/tiki-index.php?page=DebianHowTo) are? I'm not afraid of building from source if I have to, but I prefer to do as much as possible through apt/dpkg, just so the system knows what's on it. (I'm currently using 0.3.7k also.) > > The PVR-350 and the first tuner on the PVR-500 seem to work as > > expected. Unable to get the second tuner to capture any thing. > > Have you tried the PVR-500 on its own? I have only a PVR-500mce and, as mentioned above, I'm seeing the exact same problems (including the same log messages when I try to use the second tuner) as Scot. > > Get the following error message in /var/log/messages: > > > > Sep 16 17:21:28 terraslave kernel: ivtv warning: i2c client addr: 0x44 > > not found for command 0x80446468! > > Sep 16 17:21:28 terraslave kernel: ivtv warning: i2c client addr: 0x44 > > not found for command 0x400e6407! > > From memory, that's the cx25840 chip that it's not picking up. Post > your full ivtv dmesg output. Here's mine: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.7 (k) loading ivtv: Linux version: 2.6.8 preempt K7 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 16 ivtv: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: Ignoring new-style parameters in presence of obsolete ones tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2994911 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #0 ok [client=tveeprom[50], addr=50] ivtv: This is the first unit of a PVR500 tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840: Ignoring new-style parameters in presence of obsolete ones cx25840: firmware /lib/modules/HcwMakoA.ROM loaded ivtv: i2c attach to card #0 ok [client=cx25840[50], addr=44] wm8775: Ignoring new-style parameters in presence of obsolete ones ivtv: i2c attach to card #0 ok [client=wm8775[50], addr=1b] ivtv: Detected a TEA5767 radio tuner. Enabling radio support. ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Create encoder radio stream tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 ivtv: Initialized WinTV PVR 150, card #0 ivtv: ====================== NEXT CARD ====================== ivtv: Autodetected WinTV PVR 150 card (iTVC16 based) ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: Hauppauge: model = 23552, rev = D592, serial# = 2994911 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv: i2c attach to card #1 ok [client=tveeprom[50], addr=50] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach to card #1 ok [client=(tuner unset), addr=61] ivtv: i2c attach to card #1 ok [client=wm8775[50], addr=1b] ivtv: This is the second unit of a PVR500 ivtv: Correcting tveeprom data: no radio present on second tuner ivtv warning: i2c client addr: 0x44 not found for command 0x800464cb! ivtv: Encoder revision: 0x02040011 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Create DMA encoder VBI stream: 0 x 17472 buffers (0KB total) ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv warning: i2c client addr: 0x44 not found for command 0x40046403! ivtv warning: i2c client addr: 0x44 not found for command 0x40046404! ivtv warning: i2c client addr: 0x44 not found for command 0x4004646e! ivtv warning: i2c client addr: 0x44 not found for command 0x40046403! ivtv warning: i2c client addr: 0x44 not found for command 0x40046406! ivtv warning: i2c client addr: 0x44 not found for command 0x40046406! ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ Ivtv-users mailing list Ivtv-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ivtv-users
