Add the linux demo cell config for j721e-evm board. Also add the required device tree for booting Linux kernel in the inmate cell.
This cell config acts as a reference for partitioning devices across the 2 Linux cells. This will be updated as support for more devices get added. Signed-off-by: Lokesh Vutla <[email protected]> Signed-off-by: Nikhil Devshatwar <[email protected]> --- Notes: Changes from v3: * Add gpio, emmc and USB device in the DTS with upstream bindings * Describe the irqmap for easy understanding and verification * Update power-domains properties Changes from v2: * Only add the DT entries for devices with stable bindings * Organize the DTS to match the bus topology with upstream kernel Changes from v1: * Split up the peripheral mem_region to match with kernel dts * Add GPU, multimedia decoder and display devices configs/arm64/dts/inmate-k3-j721e-evm.dts | 433 ++++++++++++++++++++++ configs/arm64/k3-j721e-evm-linux-demo.c | 262 +++++++++++++ 2 files changed, 695 insertions(+) create mode 100644 configs/arm64/dts/inmate-k3-j721e-evm.dts create mode 100644 configs/arm64/k3-j721e-evm-linux-demo.c diff --git a/configs/arm64/dts/inmate-k3-j721e-evm.dts b/configs/arm64/dts/inmate-k3-j721e-evm.dts new file mode 100644 index 00000000..51470a57 --- /dev/null +++ b/configs/arm64/dts/inmate-k3-j721e-evm.dts @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E Jailhouse inmate kernel + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +/ { + model = "Texas Instruments J721E Inmate Model"; + compatible = "ti,j721e-evm", "ti,j721e"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial3 = &main_uart1; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + hypervisor { + compatible = "jailhouse,cell"; + }; + + memory@8a0000000 { + device_type = "memory"; + reg = <0x8 0xa0000000 0x0 0x60000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + pci@76000000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = + <0 0 0 1 &gic500 0 0 GIC_SPI 163 IRQ_TYPE_EDGE_RISING>, + <0 0 0 2 &gic500 0 0 GIC_SPI 164 IRQ_TYPE_EDGE_RISING>, + <0 0 0 3 &gic500 0 0 GIC_SPI 165 IRQ_TYPE_EDGE_RISING>, + <0 0 0 4 &gic500 0 0 GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; + reg = <0x0 0x76000000 0x0 0x100000>; + ranges = + <0x02000000 0x00 0x10000000 0x0 0x10000000 0x00 0x10000>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ + <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + }; + }; +}; + +&cbass_main { + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + main_navss_intr: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <4>; + }; + + main_udmass_inta: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <209>; + ti,sci-rm-range-vint = <0xa>; + ti,sci-rm-range-global-event = <0xd>; + }; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_016"; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x0 0x11c000 0x0 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 278 0>; + clock-names = "fclk"; + }; + + main_gpio2: gpio@610000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00610000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <107 0>, <107 1>, <107 2>, <107 3>, + <107 4>, <107 5>, <107 6>, <107 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 0>; + clock-names = "gpio"; + }; + + main_gpio3: gpio@611000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00611000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <108 0>, <108 1>, <108 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 108 0>; + clock-names = "gpio"; + }; + + main_sdhci0: sdhci@4f80000 { + compatible = "ti,j721e-sdhci-8bit"; + reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + assigned-clocks = <&k3_clks 91 1>; + assigned-clock-parents = <&k3_clks 91 2>; + bus-width = <8>; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,strobe-sel = <0x77>; + dma-coherent; + }; + + usbss1: cdns_usb@4114000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4114000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 289 15>, <&k3_clks 289 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 289 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb1: usb@6400000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6400000 0x00 0x10000>, + <0x00 0x6410000 0x00 0x10000>, + <0x00 0x6420000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; +}; + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <13>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 16>, + <&secure_proxy_main 18>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x0 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; +}; + +/* Board specific device tree entries */ + +/ { + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&sw10_button_pins_default>; + + sw10 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&main_gpio2 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&main_pmx0 { + sw10_button_pins_default: sw10_button_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ + >; + }; + + main_usbss1_pins_default: main_usbss1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; +}; + +&main_sdhci0 { + /* eMMC */ + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,usb2-only; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "high-speed"; +}; diff --git a/configs/arm64/k3-j721e-evm-linux-demo.c b/configs/arm64/k3-j721e-evm-linux-demo.c new file mode 100644 index 00000000..12351ab3 --- /dev/null +++ b/configs/arm64/k3-j721e-evm-linux-demo.c @@ -0,0 +1,262 @@ +/* + * Jailhouse, a Linux-based partitioning hypervisor + * + * Configuration for Linux inmate on J721E based platforms + * 1 CPUs, 512MB RAM, 1 serial port + * + * Copyright (c) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * + * Authors: + * Nikhil Devshatwar <[email protected]> + * Lokesh Vutla <[email protected]> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#include <jailhouse/types.h> +#include <jailhouse/cell-config.h> + +#ifndef CONFIG_INMATE_BASE +#define CONFIG_INMATE_BASE 0x0000000 +#endif + +struct { + struct jailhouse_cell_desc cell; + __u64 cpus[1]; + struct jailhouse_memory mem_regions[20]; + struct jailhouse_irqchip irqchips[4]; + struct jailhouse_pci_device pci_devices[1]; +} __attribute__((packed)) config = { + .cell = { + .signature = JAILHOUSE_CELL_DESC_SIGNATURE, + .revision = JAILHOUSE_CONFIG_REVISION, + .name = "k3-j721e-evm-linux-demo", + .flags = JAILHOUSE_CELL_PASSIVE_COMMREG, + + .cpu_set_size = sizeof(config.cpus), + .num_memory_regions = ARRAY_SIZE(config.mem_regions), + .num_irqchips = ARRAY_SIZE(config.irqchips), + .num_pci_devices = ARRAY_SIZE(config.pci_devices), + .cpu_reset_address = 0x0, + .vpci_irq_base = 195 - 32, + .console = { + .address = 0x2810000, + .divider = 0x1b, + .type = JAILHOUSE_CON_TYPE_8250, + .flags = JAILHOUSE_CON_ACCESS_MMIO | + JAILHOUSE_CON_REGDIST_4, + }, + }, + + .cpus = { + 0x2, + }, + + .mem_regions = { + /* IVSHMEM shared memory region for 00:00.0 */ { + .phys_start = 0x89fe00000, + .virt_start = 0x89fe00000, + .size = 0x100000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_ROOTSHARED, + }, + /* ctrl mmr */ { + .phys_start = 0x00100000, + .virt_start = 0x00100000, + .size = 0x00020000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO | JAILHOUSE_MEM_ROOTSHARED, + }, + /* Main.uart1 */ { + .phys_start = 0x02810000, + .virt_start = 0x02810000, + .size = 0x1000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* sdhci0 */ { + .phys_start = 0x4f80000, + .virt_start = 0x4f80000, + .size = 0x1000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO | JAILHOUSE_MEM_ROOTSHARED, + }, + /* sdhci0 */ { + .phys_start = 0x4f88000, + .virt_start = 0x4f88000, + .size = 0x1000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO | JAILHOUSE_MEM_ROOTSHARED, + }, + /* main sproxy target_data host_id=A72_3 */ { + .phys_start = 0x3240f000, + .virt_start = 0x3240f000, + .size = 0x05000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* main sproxy rt host_id=A72_3 */ { + .phys_start = 0x3280f000, + .virt_start = 0x3280f000, + .size = 0x05000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* main sproxy scfg host_id=A72_3 */ { + .phys_start = 0x32c0f000, + .virt_start = 0x32c0f000, + .size = 0x05000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* D552 decoder */ { + .phys_start = 0x4300000, + .virt_start = 0x4300000, + .size = 0x100000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* GPU */ { + .phys_start = 0x4e20000000, + .virt_start = 0x4e20000000, + .size = 0x80000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* dss.common_s1 */ { + .phys_start = 0x4B00000, + .virt_start = 0x4B00000, + .size = 0x00010000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* dss.vidl1 */ { + .phys_start = 0x4A20000, + .virt_start = 0x4A20000, + .size = 0x00010000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* dss.ovr1 */ { + .phys_start = 0x4A70000, + .virt_start = 0x4A70000, + .size = 0x00010000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* dss.vp1 */ { + .phys_start = 0x4A80000, + .virt_start = 0x4A80000, + .size = 0x00010000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* serdes 10G */ { + .phys_start = 0x05050000, + .virt_start = 0x05050000, + .size = 0x10000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* DSS_EDP0_V2A_CORE_VP_REGS_AP */ { + .phys_start = 0x0A000000, + .virt_start = 0x0A000000, + .size = 0x31000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* DSS_EDP0_INTG_CFG_VP */ { + .phys_start = 0x04F40000, + .virt_start = 0x04F40000, + .size = 0x1000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_IO, + }, + /* linux-loader space */ { + .phys_start = 0x89ff00000, + .virt_start = 0x0, + .size = 0x10000, /* 64KB */ + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_EXECUTE | JAILHOUSE_MEM_LOADABLE, + }, + /* RAM. */ { + .phys_start = 0x8a0000000, + .virt_start = 0x8a0000000, + .size = 0x60000000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_EXECUTE | JAILHOUSE_MEM_DMA | + JAILHOUSE_MEM_LOADABLE, + }, + /* communication region */ { + .virt_start = 0x80000000, + .size = 0x00001000, + .flags = JAILHOUSE_MEM_READ | JAILHOUSE_MEM_WRITE | + JAILHOUSE_MEM_COMM_REGION, + }, + }, + + .irqchips = { + /* + * offset = (SPI_NR + 32 - base) / 32 + * bit = (SPI_NR + 32 - base) % 32 + */ + { + .address = 0x01800000, + .pin_base = 32, + /* + * sdhci0 SPI_3 => idx 0 bit 3 + * sproxy_rx_016 SPI_71 => idx 1 bit 7 + * usb1.host SPI_104 => idx 3 bit 8 + * usb1.peripheral SPI_110 => idx 3 bit 14 + * usb1.otg SPI_121 => idx 3 bit 25 + */ + .pin_bitmap = { + 0x00000008, 0x00000080, 0x00000000, 0x02004100, + }, + }, + { + .address = 0x01800000, + .pin_base = 160, + /* + * virtual PCI SPI_163 to 166 => idx 1 bit [6:3] + * main_uart1 SPI_193 to 166 => idx 2 bit 1 + */ + .pin_bitmap = { + 0x00000000, 0x00000078, 0x00000002, 0x00000000, + }, + }, + { + .address = 0x01800000, + .pin_base = 416, + /* + * main_gpio_intr SPI_392 to 416 => idx 0 bit [31:8] + * ^^^^THIS^^^^ should match with SYSFW rm-cfg.c + */ + /* GPIO INTR */ + .pin_bitmap = { + 0xffffff00, 0x00000000, 0x00000000, 0x00000000, + }, + }, + { + .address = 0x01800000, + .pin_base = 544, + .pin_bitmap = { + 0x00000000, 0x00000000, 0x00000000, 0x00000000, + }, + }, + }, + + .pci_devices = { + /* 00:00.0 */ { + .type = JAILHOUSE_PCI_TYPE_IVSHMEM, + .bdf = 0x00, + .bar_mask = { + 0xffffff00, 0xffffffff, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, + }, + .shmem_region = 0, + .shmem_protocol = JAILHOUSE_SHMEM_PROTO_VETH, + }, + }, +}; -- 2.17.1 -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/20191223151353.22495-5-nikhil.nd%40ti.com.
