On 24.12.19 11:04, 'Lokesh Vutla' via Jailhouse wrote:
On 24/12/19 3:18 PM, Nikhil Devshatwar wrote:
On 24/12/19 9:42 am, Lokesh Vutla wrote:
On 23/12/19 8:43 PM, Nikhil Devshatwar wrote:
Add the linux demo cell config for j721e-evm board.
Also add the required device tree for booting Linux kernel
in the inmate cell.
This cell config acts as a reference for partitioning
devices across the 2 Linux cells.
This will be updated as support for more devices get added.
Signed-off-by: Lokesh Vutla <[email protected]>
Signed-off-by: Nikhil Devshatwar <[email protected]>
---
Notes:
Changes from v3:
* Add gpio, emmc and USB device in the DTS with upstream bindings
* Describe the irqmap for easy understanding and verification
* Update power-domains properties
Changes from v2:
* Only add the DT entries for devices with stable bindings
* Organize the DTS to match the bus topology with upstream kernel
Changes from v1:
* Split up the peripheral mem_region to match with kernel dts
* Add GPU, multimedia decoder and display devices
configs/arm64/dts/inmate-k3-j721e-evm.dts | 433 ++++++++++++++++++++++
configs/arm64/k3-j721e-evm-linux-demo.c | 262 +++++++++++++
2 files changed, 695 insertions(+)
create mode 100644 configs/arm64/dts/inmate-k3-j721e-evm.dts
create mode 100644 configs/arm64/k3-j721e-evm-linux-demo.c
diff --git a/configs/arm64/dts/inmate-k3-j721e-evm.dts
b/configs/arm64/dts/inmate-k3-j721e-evm.dts
new file mode 100644
index 00000000..51470a57
--- /dev/null
+++ b/configs/arm64/dts/inmate-k3-j721e-evm.dts
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E Jailhouse inmate kernel
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+ surprised how they can
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+ model = "Texas Instruments J721E Inmate Model";
+ compatible = "ti,j721e-evm", "ti,j721e";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial3 = &main_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+
+ hypervisor {
+ compatible = "jailhouse,cell";
+ };
+
[..snip..]
+
+ cbass_main_navss: interconnect0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ main_navss_intr: interrupt-controller1 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <4>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <14>;
+ ti,sci-rm-range-girq = <4>;
+ };
+
+ main_udmass_inta: interrupt-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ interrupt-parent = <&main_navss_intr>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <209>;
+ ti,sci-rm-range-vint = <0xa>;
+ ti,sci-rm-range-global-event = <0xd>;
+ };
You should drop this node. The address is not mapped in
k3-j721e-evm-linux-demo.c and there are no users in this DT. You should be very
careful when virtualizing inta and udmass.
I am waiting for mcasp bindings to be supported in mainline kernel.
Once it is done, we will start using UDMA, inta, intr from linux-demo cell
+ };
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_016";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
[..snip..]
+
+/ {
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sw10_button_pins_default>;
+
+ sw10 {
+ label = "GPIO Key USER1";
+ linux,code = <BTN_0>;
+ gpios = <&main_gpio2 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&main_pmx0 {
+ sw10_button_pins_default: sw10_button_pins_default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18)
EXTINTn.GPIO0_0 */
hmm..is this working? IIRC GPIO group should be selected along with mux mode,
else it will be routed to GPIO0.
Good catch. Since many configs are not enabled in mainline kernel, I missed
these failures.
I enabled the configs an it is failing. I shall send the fixes separately now
that the series is merged in next
Jan,
What do you prefer?
Yes, please on top. The in-tree version already has a build fix.
Jan
--
You received this message because you are subscribed to the Google Groups
"Jailhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jailhouse-dev/3751863b-3986-0eae-038e-9011e618a759%40web.de.
