On 14.02.20 17:24, Vijai Kumar K wrote:
- Add the necessary machine, multiconfig and wks file.
- Add entry in images list.
- Add info in README.
Signed-off-by: Vijai Kumar K <[email protected]>
---
README.md | 6 ++++++
conf/machine/pine64-plus.conf | 19 +++++++++++++++++++
.../pine64-plus-jailhouse-demo.conf | 14 ++++++++++++++
images.list | 1 +
wic/pine64-plus.wks | 16 ++++++++++++++++
5 files changed, 56 insertions(+)
create mode 100644 conf/machine/pine64-plus.conf
create mode 100644 conf/multiconfig/pine64-plus-jailhouse-demo.conf
create mode 100644 wic/pine64-plus.wks
diff --git a/README.md b/README.md
index 8841513..99d9f0d 100644
--- a/README.md
+++ b/README.md
@@ -115,6 +115,12 @@ is support. You can boot the board directly from the
generated SD card image.
The mini UART on the GPIO header (pin 6/8/10: Ground/TXD/RXD) is used as
serial
console.
+## Pine64+
+
+The [Pine64+](https://www.pine64.org/devices/single-board-computers/pine-a64/)
+with Allwinner A64 is supported with its 2GB edition. You can boot the board
+directly from the generated SD card image. UART0 available via EXP 10 connector
+(pin 7/8/9: TXD/RXD/GND) is used as serial console. For details refer
[here](https://linux-sunxi.org/Pine64#Serial_port_.2F_UART).
Community Resources
-------------------
diff --git a/conf/machine/pine64-plus.conf b/conf/machine/pine64-plus.conf
new file mode 100644
index 0000000..0949ab4
--- /dev/null
+++ b/conf/machine/pine64-plus.conf
@@ -0,0 +1,19 @@
+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <[email protected]>
+#
+# SPDX-License-Identifier: MIT
+#
+
+DISTRO_ARCH = "arm64"
+
+IMAGE_TYPE = "wic-img"
+IMAGER_INSTALL += "u-boot-pine64-plus"
+IMAGER_BUILD_DEPS += "u-boot-pine64-plus"
+PREFERRED_PROVIDER_u-boot-pine64-plus = "u-boot-pine64-plus"
+
+IMAGE_INSTALL += "u-boot-script"
diff --git a/conf/multiconfig/pine64-plus-jailhouse-demo.conf
b/conf/multiconfig/pine64-plus-jailhouse-demo.conf
new file mode 100644
index 0000000..5e66c94
--- /dev/null
+++ b/conf/multiconfig/pine64-plus-jailhouse-demo.conf
@@ -0,0 +1,14 @@
+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <[email protected]>
+#
+# SPDX-License-Identifier: MIT
+#
+#
+MACHINE = "pine64-plus"
+
+DISTRO = "jailhouse-demo"
diff --git a/images.list b/images.list
index 26a802d..b794d85 100644
--- a/images.list
+++ b/images.list
@@ -7,3 +7,4 @@ macchiatobin Marvell MACCHIATObin
hikey620 LeMaker HiKey (Kirin 620 SoC, 2 GB edition)
ultra96 Avnet Ultra96
rpi4 Raspberry Pi 4 (1 GB edition)
+pine64-plus Pine64+ (Allwinner A64, 2GB edition)
diff --git a/wic/pine64-plus.wks b/wic/pine64-plus.wks
new file mode 100644
index 0000000..aacca04
--- /dev/null
+++ b/wic/pine64-plus.wks
@@ -0,0 +1,16 @@
+#
+# Jailhouse, a Linux-based partitioning hypervisor
+#
+# Copyright (c) Vijai Kumar K, 2020
+#
+# Authors:
+# Vijai Kumar K <[email protected]>
+#
+# SPDX-License-Identifier: MIT
+#
+
+part u-boot --source rawcopy --sourceparams
"file=/usr/lib/u-boot/pine64-plus/u-boot-sunxi-with-spl.bin" --no-table --align
8
+
+part / --source rootfs-u-boot --ondisk mmcblk0 --fstype ext4 --label platform
--align 1024
+
+bootloader --append "rootwait mem=1792M"
Thanks, I've merged all 4 to next. But we need some tuning: The config
files only come via --latest, not via the default 0.12 release build. We
can either carry the backported patches from upstream in the 0.12 recipe
or describe the limitation in the documentation until the next release
is out.
Jan
--
You received this message because you are subscribed to the Google Groups
"Jailhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jailhouse-dev/c7a38ec3-253d-23a2-c470-19b6ca2ee22d%40web.de.
