On Sat 15 Feb, 2020, 8:02 PM Jan Kiszka, <[email protected]> wrote: > On 14.02.20 17:24, Vijai Kumar K wrote: > > - Add the necessary machine, multiconfig and wks file. > > - Add entry in images list. > > - Add info in README. > > > > Signed-off-by: Vijai Kumar K <[email protected]> > > --- > > README.md | 6 ++++++ > > conf/machine/pine64-plus.conf | 19 +++++++++++++++++++ > > .../pine64-plus-jailhouse-demo.conf | 14 ++++++++++++++ > > images.list | 1 + > > wic/pine64-plus.wks | 16 ++++++++++++++++ > > 5 files changed, 56 insertions(+) > > create mode 100644 conf/machine/pine64-plus.conf > > create mode 100644 conf/multiconfig/pine64-plus-jailhouse-demo.conf > > create mode 100644 wic/pine64-plus.wks > > > > diff --git a/README.md b/README.md > > index 8841513..99d9f0d 100644 > > --- a/README.md > > +++ b/README.md > > @@ -115,6 +115,12 @@ is support. You can boot the board directly from > the generated SD card image. > > The mini UART on the GPIO header (pin 6/8/10: Ground/TXD/RXD) is used > as serial > > console. > > > > +## Pine64+ > > + > > +The [Pine64+]( > https://www.pine64.org/devices/single-board-computers/pine-a64/) > > +with Allwinner A64 is supported with its 2GB edition. You can boot the > board > > +directly from the generated SD card image. UART0 available via EXP 10 > connector > > +(pin 7/8/9: TXD/RXD/GND) is used as serial console. For details refer > [here](https://linux-sunxi.org/Pine64#Serial_port_.2F_UART). > > > > Community Resources > > ------------------- > > diff --git a/conf/machine/pine64-plus.conf > b/conf/machine/pine64-plus.conf > > new file mode 100644 > > index 0000000..0949ab4 > > --- /dev/null > > +++ b/conf/machine/pine64-plus.conf > > @@ -0,0 +1,19 @@ > > +# > > +# Jailhouse, a Linux-based partitioning hypervisor > > +# > > +# Copyright (c) Vijai Kumar K, 2020 > > +# > > +# Authors: > > +# Vijai Kumar K <[email protected]> > > +# > > +# SPDX-License-Identifier: MIT > > +# > > + > > +DISTRO_ARCH = "arm64" > > + > > +IMAGE_TYPE = "wic-img" > > +IMAGER_INSTALL += "u-boot-pine64-plus" > > +IMAGER_BUILD_DEPS += "u-boot-pine64-plus" > > +PREFERRED_PROVIDER_u-boot-pine64-plus = "u-boot-pine64-plus" > > + > > +IMAGE_INSTALL += "u-boot-script" > > diff --git a/conf/multiconfig/pine64-plus-jailhouse-demo.conf > b/conf/multiconfig/pine64-plus-jailhouse-demo.conf > > new file mode 100644 > > index 0000000..5e66c94 > > --- /dev/null > > +++ b/conf/multiconfig/pine64-plus-jailhouse-demo.conf > > @@ -0,0 +1,14 @@ > > +# > > +# Jailhouse, a Linux-based partitioning hypervisor > > +# > > +# Copyright (c) Vijai Kumar K, 2020 > > +# > > +# Authors: > > +# Vijai Kumar K <[email protected]> > > +# > > +# SPDX-License-Identifier: MIT > > +# > > +# > > +MACHINE = "pine64-plus" > > + > > +DISTRO = "jailhouse-demo" > > diff --git a/images.list b/images.list > > index 26a802d..b794d85 100644 > > --- a/images.list > > +++ b/images.list > > @@ -7,3 +7,4 @@ macchiatobin Marvell MACCHIATObin > > hikey620 LeMaker HiKey (Kirin 620 SoC, 2 GB edition) > > ultra96 Avnet Ultra96 > > rpi4 Raspberry Pi 4 (1 GB edition) > > +pine64-plus Pine64+ (Allwinner A64, 2GB edition) > > diff --git a/wic/pine64-plus.wks b/wic/pine64-plus.wks > > new file mode 100644 > > index 0000000..aacca04 > > --- /dev/null > > +++ b/wic/pine64-plus.wks > > @@ -0,0 +1,16 @@ > > +# > > +# Jailhouse, a Linux-based partitioning hypervisor > > +# > > +# Copyright (c) Vijai Kumar K, 2020 > > +# > > +# Authors: > > +# Vijai Kumar K <[email protected]> > > +# > > +# SPDX-License-Identifier: MIT > > +# > > + > > +part u-boot --source rawcopy --sourceparams > "file=/usr/lib/u-boot/pine64-plus/u-boot-sunxi-with-spl.bin" --no-table > --align 8 > > + > > +part / --source rootfs-u-boot --ondisk mmcblk0 --fstype ext4 --label > platform --align 1024 > > + > > +bootloader --append "rootwait mem=1792M" > > > > Thanks, I've merged all 4 to next. But we need some tuning: The config > files only come via --latest, not via the default 0.12 release build. We > can either carry the backported patches from upstream in the 0.12 recipe > or describe the limitation in the documentation until the next release > is out. >
I would say let's back-port it. I'll send a patch on that. Thanks, Vijai Kumar K > Jan > -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/CALLGG_L3c5%3Dg35XOnG79mC3ksKAFqBdwp6EUDqVRqg%2BzQewv0g%40mail.gmail.com.
