On 22.10.21 17:13, Anda-Alexandra Dorneanu wrote: > Add device tree demo for Linux inmate running on NXP LS1088ARDB platform > > Signed-off-by: Anda-Alexandra Dorneanu <[email protected]> > --- > configs/arm64/dts/inmate-ls1088a-rdb.dts | 135 +++++++++++++++++++++++ > 1 file changed, 135 insertions(+) > create mode 100644 configs/arm64/dts/inmate-ls1088a-rdb.dts > > diff --git a/configs/arm64/dts/inmate-ls1088a-rdb.dts > b/configs/arm64/dts/inmate-ls1088a-rdb.dts > new file mode 100644 > index 00000000..91fac3f7 > --- /dev/null > +++ b/configs/arm64/dts/inmate-ls1088a-rdb.dts > @@ -0,0 +1,135 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Device Tree for inmate cell on NXP LS1088ARDB platform > + * > + * Copyright 2021 NXP > + * > + * Anda-Alexandra Dorneanu <[email protected]> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + compatible = "fsl,ls1088a"; > + model = "LS1088A RDB Board"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &duart1; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu2: cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x2>; > + clocks = <&clockgen 1 0>; > + cpu-idle-states = <&CPU_PH20>; > + #cooling-cells = <2>; > + enable-method = "psci"; > + }; > + > + cpu3: cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53"; > + reg = <0x3>; > + clocks = <&clockgen 1 0>; > + cpu-idle-states = <&CPU_PH20>; > + #cooling-cells = <2>; > + enable-method = "psci"; > + }; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + CPU_PH20: cpu-ph20 { > + compatible = "arm,idle-state"; > + idle-state-name = "PH20"; > + arm,psci-suspend-param = <0x0>; > + entry-latency-us = <1000>; > + exit-latency-us = <1000>; > + min-residency-us = <3000>; > + }; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + sysclk: sysclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + clock-output-names = "sysclk"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>, > + <1 14 IRQ_TYPE_LEVEL_LOW>, > + <1 11 IRQ_TYPE_LEVEL_LOW>, > + <1 10 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + gic: interrupt-controller@6000000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ > + <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/ > + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ > + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ > + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ > + interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + clockgen: clocking@1300000 { > + compatible = "fsl,ls1088a-clockgen"; > + reg = <0x0 0x1300000 0x0 0xa0000>; > + #clock-cells = <2>; > + clocks = <&sysclk>; > + }; > + > + duart1: serial@21c0600 { > + compatible = "fsl,ns16550", "ns16550a"; > + reg = <0x00 0x21c0600 0x0 0x100>; > + clocks = <&clockgen 4 1>; > + status = "okay"; > + }; > + }; > + > + pci@13000000 { > + compatible = "pci-host-ecam-generic"; > + device_type = "pci"; > + bus-range = <0 0>; > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &gic GIC_SPI 49 IRQ_TYPE_EDGE_RISING>, > + <0 0 0 2 &gic GIC_SPI 50 IRQ_TYPE_EDGE_RISING>, > + <0 0 0 3 &gic GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, > + <0 0 0 4 &gic GIC_SPI 56 IRQ_TYPE_EDGE_RISING>; > + reg = <0x0 0x13000000 0x0 0x100000>; > + ranges = <0x02000000 0x00 0x10000000 0x0 0x10000000 0x00 > 0x10000>; > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > +}; >
Thanks, both applied. Jan -- You received this message because you are subscribed to the Google Groups "Jailhouse" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jailhouse-dev/10f11bc0-ef4f-78e8-506e-470d4bd2dbd0%40web.de.
