Hi, thank you for replying.
ttyS0 is indeed whitelisted in the inmate and the number of pio_regions is
set accordingly.
As for the crash after disable/shutdown, I think it was related to the PCI
device, after commenting that and the corresponding regions out I no longer
get that freeze. CONFIG_JAILHOUSE_GUEST and
CONFIG_JAILHOUSE_DBCON were already set in the kernel configuration I'm
using for the non root linux; still, I recompiled it just in case.
Michele
Il giorno martedì 9 gennaio 2024 alle 14:14:33 UTC+1 Ralf Ramsauer ha
scritto:
Hi,
On 08/01/2024 23:56, Michele Pescapè wrote:
> Hi all,
>
> I have an AMD Ryzen 2600 on a b450 motherboard. My goal is to run two
> non root linux cells, however, as of right now, I'm not able to start
> any non root linux cells.
> First of all I don't receive an output from the cell (I do get output
> from the apic-demo though), therefore I don't really know if they're
> even crashing or not; this is the output I get from the hypervisor after
> enabling the root cell and issuing the following command:
>
> sudo jailhouse cell linux configs/x86/linux_guest1.cell
> ../buildroot-2023.11/output/images/bzImage -i
> ../buildroot-2023.11/output/images/rootfs.cpio
for the first few tries, simply don't load a ramdisk. Try to get the
kernel booting. It will crash with "cannot mount rootfs". If we get so
far, then you can continue specifying the ramdisk. But first, we have to
get that far.
>
> Adding PCI device ff:1f.7 to cell "linux-x86-demo"
> Created cell "linux-x86-demo"
> Page pool usage after cell creation: mem 336/32211, remap 16392/131072
> Cell "linux-x86-demo" can be loaded
> CPU 4 received SIPI, vector 100
> CPU 3 received SIPI, vector 100
> Started cell "linux-x86-demo"
>
> After this the cell appears to be running in cell list, however I can't
> seem to get any output to confirm that (I even set
> JAILHOUSE_CELL_VIRTUAL_CONSOLE_ACTIVE, but nothing appears on the vrtual
> console accessed via "jailhouse console -f"). I also tried adding -c
> "console=ttyS0,115200".
ttyS0, i.e., x86 Port 0x3f8 is whitelisted in the cell configuration?
Actually, your cmdline is correct.
> At this point if I try to disable/shutdown the cell, the system freezes
> requiring a hard reset.
Okay, is the guest Linux compiled with Jailhouse guest support? Please
ensure that non-root Linux is compiled with CONFIG_JAILHOUSE_GUEST and
CONFIG_JAILHOUSE_DBCON. The first one is mandatory for x86 Linux guests.
>
> Also, there seems to be a mismatch between the PCI bdf value in the log
> above and the one in the cell's configuration. In both root and non root
> cells i set .bdf = (0x0f << 3) for the IVSHMEM net device and the Root
> cell correctly reports that ("Adding virtual PCI device 00:0f.0 to cell
> "RootCell"").
First things first. Let's try to get Linux kicked off before diving into
PCI. Comment it out for the moment, let's do that later.
Ralf
>
> If I understood correctly, once the cell works properly I won't need to
> set the console anymore as I can assign an ip (-c "ip x.x.x.x" in the
> cell linux command) and ssh to the cell, right?
>
> I attach the root and non root cells' configurations in case they're
> needed. I can provide both the root and non root cell's kernel .conf and
> the buildroot configuration I used if needed.
>
> Thank you for your time,
> Michele
>
> --
> You received this message because you are subscribed to the Google
> Groups "Jailhouse" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to [email protected]
> <mailto:[email protected]>.
> To view this discussion on the web visit
>
https://groups.google.com/d/msgid/jailhouse-dev/824bacc4-b7ae-47c9-878e-7203214b4fc3n%40googlegroups.com
<
https://groups.google.com/d/msgid/jailhouse-dev/824bacc4-b7ae-47c9-878e-7203214b4fc3n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"Jailhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/jailhouse-dev/c9dad4f3-f856-4f25-b6ad-41ec63cf2c64n%40googlegroups.com.
