Eur van Andel wrote:
>>> OPTION_REG_T0CS = off
> Only for 10F's, but it should go into the device files, and into the
> enable_dig_io() procedure.
OK! I'll do that
But in the meantime I've done some datasheet scanning and think it is
also useful for the 12F508,509 and 16F505 (maybe even more). Please check.
>>> pragma MCLR external
> All that have, should declare MCLR external. Programming an internal
> MCLR PIC depends on a very specific power-up sequence which can
> baffle newbies. This should be in the BLINK files only, for now.
I assume you are referring to the Vpp-before-Vdd sequence when MCLR is
configured 'internal'. That applies to only a minority of chips, I
think. But OK, I'll put it in the blink programs, it won't harm.
However I think in the 18Fs the MCLR EXTERNAL has a different meaning.
So it should not appear in the blink programs for the 18Fs.
Regards, Rob.
--
Rob Hamerling, Vianen, NL (http://www.robh.nl/)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"jallib" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.com/group/jallib?hl=en
-~----------~----~----~----~------~----~------~--~---
